Question about 2002 Nissan Altima

1 Answer

I had the follwoing codes when I had the care

I had the follwoing codes when I had the care scan. P0725 and P0335.

Posted by Anonymous on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Nissan Master
  • 902 Answers

P0335 refer to camshaft position sensor circuit
p0725 refer to engine speed circuit , check the camshaft pos. sensor wires, plug or replace the sensor

Posted on Jul 28, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Engine code PO725


They are vehicle specific in most cases. Google

Make error code P0725

and that is a zero, not letter O for Oscar.

Looks like

Definition of error code P0725 - Engine Speed input Circuit Malfunction. Read emissions expert information and diagnostics for fault code P0725.


Google

May 13, 2017 | Cars & Trucks

1 Answer

2005 nissan altima codes p0725, po335. how to fix


P0335 Crankshaft Position Sensor A Circuit Malfunction P0725 Engine Speed input Circuit Malfunction
  1. Using a scan tool, check if, when engine is running or cranking, that there is an RPM signal.
  2. If there is no RPM reading, then visually inspect the crank sensor and connector for any damage and repair as necessary. If there is no visible damage, and you have access to a scope, you could check the CKP 5 Volt square wave pattern. If you do not, then, obtain a resistance reading of your crank sensor from a repair manualmag-glass_10x10.gif. (There are so many different types of crank sensors that there's no way to put here which resistance reading is correct). Then check the resistance of the CKP sensor by disconnecting the sensor and measuring resistance of the sensor. (It is best to check resistance readings from the PCM connector. This rules out any wiring problems from the start. But it does require some mechanical skill and shouldn't be performed if you\'re not familiar with automobile electrical systems). Is the sensor within resistance specs?
  3. If not, replace the CKP sensor. If so, recheck resistance reading from the PCM connector. Is the reading still okay?
  4. If not, repair open or short in the wiring to the crank sensor and re-check. If the reading is okay, the problem is intermittent or the PCM may be at fault. Try reconnecting and checking for RPM signal again. If there is now an RPM signal, wiggle test the wiring harness to try and induce the fault.

Sep 10, 2011 | 2004 Nissan Altima

1 Answer

The check engine light is on and the car some times will not start.The battery and alternator have been replaced about 6 months ago and this problem has been accruing for the last 2 months.


sounds like you have a crank sensor problem. I would go to an autozone and get he could pulled for free and see if it is either a p0725 or p0335 and check back with me.

Jul 17, 2011 | 2004 Nissan Altima

2 Answers

Nissan altima p0335 and p0725 is this a recall


I had the same codes on my 2003 Nissan Altima 2.5 SL


I replaced Crankshaft and Camshaft Positioning sersors and never had this problem since. Check my youtube videos how I did it:

http://youtu.be/7FsLBcuREYE
http://youtu.be/325s0pFQZtg

Apr 07, 2011 | Nissan Altima Cars & Trucks

1 Answer

Check engine light is on in my 2005 altima 2.5 got it scanned and the codes i got were P0335 /P0725/P0420 also car keeps stalling


po335 and 725 bad crank sensor and this is also reason for stalling.po 420 catalyst has lost efficiency....needs new catalytic converter ...covered under 8year 80000 mile emmisions warranty.

Feb 08, 2011 | 2005 Nissan Altima

2 Answers

02' Nissan Altima, car jerking, turns off at light, but turns right back on. Engine light on, code from autozone P0335 crankshaft position sensor. P0725 Engine speed signal circuit. The start up, days it...


If it has a code for loosing the crankshaft position sensor signal, I would certainly start looking at that before venturing into the fuel system. Cam and Crank sensors are a common failure item for Nissans of that era. Nissan actually redesigned the sensor and i think they performed a recall on some vehicles. They are fairly inexpensive and easy to replace. I believe they run about $40 each. Because most people don't have access to a powerful scanner or a digital storage oscilloscope to verify the failure I recommend replacing the cam and crank sensors at the same time.

Sep 02, 2010 | 2002 Nissan Altima

2 Answers

Crankshaft Position Sensor Error P0335 recurred after r&r


In the kit there are two sensor that look identical. The one for the crankshaft has a white paint mark on it near the bolt hole. Make sure that it is in the right location.

Jul 25, 2009 | 2003 Nissan Altima

1 Answer

Crankshaft sensor


Replace the air flow meter.

Jul 19, 2009 | 2003 Nissan Altima

Not finding what you are looking for?
2002 Nissan Altima Logo

1,252 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...