Question about 1992 Mercury Grand Marquis

1 Answer

INSTRUMENT PANEL IS DARK. NO TAIL LIGHTS. NO PARKING LIGHTS. FUSE #9 IS GOOD.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,297 Answers

Assuming you have brake lights then I'd start diagnosing your headlight switch

how experienced are you with a DVOM?

Posted on Jul 28, 2010

  • jbright10 Jul 28, 2010

    I AM EXPIERENCED WITH USING A DVOM.

  • Sean Reisdorf
    Sean Reisdorf Jul 28, 2010

    then first step would be to do a volt drop between the rheostat and fuse #11 with the headlamp switch in the on position


    suspect a defective a main lamp switch



×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the parking light relay located


No relay for the parking lights .
When the headlamp switch is moved to the PARK or ON position, battery voltage is supplied from the 15A Park Lamp fuse to circuit 9. Current flows through circuit 9 to the instrument panel fuse block (IPFB). Battery power passes through the IPFB to both license lamps, both front and rear tail lamps, both front park/turn lamps, and all marker lamps through circuit 9. The front marker and front park/turn lamps are grounded by circuit 150 through the forward lamp ground splice pack. The rear tail lamps and license lamps are grounded by circuit 550 at the rear ground splice pack and the right rear body ground.

Sep 18, 2015 | 2001 Saturn SL

1 Answer

How to fix the parking lights staying on after the car is turned off


Park, marker and tail lamps inoperative.
The scan tool is connected. Turn the head lamp switch to the Park position, and observe the park lamp input on the scan tool. Is the input ON? If yes, faulty IPFB. If no, disconnect the headlamp connector. Connect a fused jumper between circuit 240 and circuit 9. Does the input on the scan tool change to ON? If yes, faulty connections or headlamp switch. If no, open circuit 9 between the headlamp switch and IPFB.- instrument panel fuse box !

Sep 18, 2015 | 2001 Saturn SL

1 Answer

I replaced the instrument cluster & head light switch on my 2001 buick century and the instrument panel and tail lights still do not work, what else can I do


Check 20Amp LP Park Fuse in Underhood Fuse Block (mounted to right strut tower) Check 15Amp Tail Lic. Lamp Fuse In IP Fuse Block.

Mar 15, 2014 | Buick Cars & Trucks

1 Answer

Tail lights don't work and instrument panel won't light up on 2007 corolla


you blew a fuse. check fuses in both fuse boxes..
ahh yes, the IP cluster lamps are dad, but not the idiot warning lights
only the parking lights in the cluster are dead. right.?
and the park-tail, running lights and dash dim lights are all the same.
my guess three is a short on the TAIL fuse, the TAIL fuse blew
and took out: park-tail, running lights and dash dim lights are all the same.
it blew. most are marked tail even thought it runs side lamps and front parking lamps... TAIL is wrong, they are parking. lamps it truth.

Feb 05, 2014 | 2007 Toyota Corolla CE

1 Answer

1994 silverado illumination on instrument panel doesn't work, parking lights and tail lights do not work but headlights and brakelights work fine. All fuses are good. Is this a bad dimmer switch?


No. Dash lights being out could be a bad headlight switch, since the dash lights are routed through the headlight switch, not the dimmer switch. Park and tail lights also controlled by the headlight switch.

Oct 23, 2012 | Chevrolet Cars & Trucks

1 Answer

95 monte carlo no parking;tail;instrument lights fuses good corrosion in fuse panel box cleaned any ideas?


I have the same exact problem on my '95 Monte. I was told to replace my Headlight Switch which is the unit to the left of the steering wheel that controls the dimmer, parking lights and headlights. Headlight switch goes for about $70 and supposed to take about 1/2 hr to swap out.

Aug 18, 2011 | 1995 Chevrolet Monte Carlo

1 Answer

Dash lights & tail lights are not working but every thing else is need help to locate fuse for it 2002 ford f150


The parking lamp circuit feeds the instrument illumination fuse

The parking lamp fuse is engine compartment Fuse # 6
After the main headlamp switch the cab fuse panel fuse # 18 is the fuse for the instrument illumination.

Don't forget to turn the main headlamp switch to at least the park position when you test the fuse with a meter.

Oct 19, 2010 | 2001 Ford F150 Styleside SuperCrew

2 Answers

Where is tail light fuse in 1996 chevrolet silverado pickup


Left of the steering wheel & under the dash is the fuse panel for this. No.9 is for the tail lights, but also for many other lights such as licence lamp/parking lamp/side marker/tail gate/etc...
There is also an under the hood fuse/relay panel, but it does not have the tail light fuse in it.

Jan 29, 2010 | 1996 Chevrolet K1500

1 Answer

Problem with Fuse #9-tail lights&instrument panel illumination


there is an electrical short somewhere you have a power wire touching the car's body. Is there tail/brake lights in the trunk lid? if yes, check around the trunk hinge, the wiring sometimes follows the hinge back to the rest of the car and everytime you open the trunk, you are bending these wires unitl one of them snaps.

Nov 18, 2008 | 1992 Ford Crown Victoria

Not finding what you are looking for?
1992 Mercury Grand Marquis Logo

Related Topics:

53 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercury Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

fordexpert

Level 3 Expert

5546 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...