Question about 2005 Ford Focus

Open Question

My headlights wont work on my 2005 ford focus what do I do?

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 417 Answers

SOURCE: Ford Focus Flight 2005

The main/high beam relay/switch must be stuck on high presuming the high beam stalk selector does not operate. Probably needs replacement.

Posted on Oct 17, 2008

Ad
  • 1986 Answers

SOURCE: 2004 ford focus headlight ajust ment

Your adjustment screws should be white nuts (adjustable with an allen wrench, or a socket, or a pair of pliers) located behind the headlamp assembly right up against the fender

Park your car on a level ground 30 feet from a wall and measure the height from the ground to the bulb and mark on a wall. You only need to do this and the aiming for your low beams as your high beams are on the same bulb

Your headlights should also say VOR. When you turn on your headlights, aim them right at the mark that you put on the wall, with the brightest cutoff directly under the mark

Posted on Sep 18, 2009

  • 101 Answers

SOURCE: I have a 2005 Ford Focus (European) and cannot

Wiahout buying a manual try ur local library.

Posted on Oct 02, 2009

  • 47 Answers

SOURCE: replacing starter 2005 ford focus

starter is located behind the motor under the intake manifold, to replace remove the battery cable & air filter box and remove 2 15mm bolts that go through the bell housing into the starter then get under the car and remove 4 10mm nuts & bolts that attach a plate from intake to the block then remove 1 more 15mm bolt holding starter in and pull it back then nose first down then remove 10mm and 13mm nuts on starter solonoid removing cable and wiggle it out past the half shaft and vualla its out

Posted on Aug 15, 2010

mabpest
  • 1152 Answers

SOURCE: diagram on fuse box for 2005 ford focus headlights

http://www.motorcraftservice.com/pubs/content/~WO5FOC/~MUS~LEN/41/05focog4e.pdf





fuses page 148

owner manual

Posted on Jan 20, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2005 Ford Focus zx4 changed passenger headlight bulb but still not working what fuse should I check to see if that is the poblem


i am not sure, but i would recommend you to first check first the connector plug for any built up corrosion, and if the wires are in good condition.

Feb 09, 2015 | 2005 Ford Focus

1 Answer

Locate low beam headlight fuse on 2005 ford focus


The fuse must be in the main fuse box. The position and function of the fuses is normally marked on the inside of the fuse box cover and also in the owner's handbook. If you don't come right with these, work your way through the fuses looking for a blown one. To ease your search the low beam fuse it should be around 15 to 20 amps.

Feb 12, 2011 | 2005 Ford Focus

1 Answer

How to change a front light bulb


p, li { white-space: pre-wrap; }
  • Ensure that the headlights on your Ford Focus are off by checking you have turned the headlight control all the way to the off position. Make sure your car is off and the keys are out of the ignition, so the daytime lamps are also off.
  • Open the hood using the hood release handle located inside the vehicle under the steering wheel on the left side of the instrument panel. Walk around to the front of your Ford Focus and release the auxiliary latch located under the front of the hood. Lift the hood and secure it in place with the yellow end of the hood's strut in the designated holes.
  • Locate the bulb cover found just behind the headlight assembly and remove it by turning it counterclockwise. Swivel the wire clip that hold the bulb and connector in place out of the way by turning it to the left.
  • Pull out the headlight bulb with its electrical connector straight out from the headlamp assembly.
  • Disconnect the bulb from the connector. Later editions of the Ford Focus may have a retaining ring that lies between the bulb and electrical connector. Simply remove this retaining ring by twisting it off with a counterclockwise turn.
  • Install the replacement headlight bulb in reverse order of removal. Use a HB2 replacement bulb for models older than 2004 and a HB5 bulb for models produced since 2005. Replace the wire clip and bulb cover, as well.
  • Turn on your Ford Focus and check that the headlights are working properly after closing the hood.

Aug 26, 2010 | 2003 Ford Focus

1 Answer

2005 ford focus were is the ac lines to fill with freon


inside right side wheel well. yo have to take the skirt out. and right on top next to headlight

Jul 24, 2010 | 2005 Ford Focus

1 Answer

Changed 2005 ford focus tdci engine put in peugeo diesel in now wont start


Two very important things. The fuel shut off valve must be working.
You will need to find out how to bleed the air out of the fuel system.

Feb 25, 2010 | 2005 Ford Focus

1 Answer

Ford Focus Flight 2005


The main/high beam relay/switch must be stuck on high presuming the high beam stalk selector does not operate. Probably needs replacement.

Oct 17, 2008 | 2005 Ford Focus

Not finding what you are looking for?
2005 Ford Focus Logo

Related Topics:

154 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76132 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5520 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...