Question about 2002 Chevrolet TrailBlazer

1 Answer

Why right headlight won't come on. We replace plug

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 415 Answers

If the fuse and light bulb are ok then you can check 2 things,
1. that the bulb fits tightly and that the connection to the bulb is clean.
2. it maybe some loose wiring that may need to be changed
good luck

Posted on Jul 28, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 01 celica's righthside headlight won't work.


Did you check to see if the bulb is burned out?

Jun 16, 2013 | Cars & Trucks

1 Answer

Headlights not working


It's grounding out after there open trace the wires looking for exposed or broken wires. Or run new wires

May 02, 2013 | Cars & Trucks

1 Answer

My 2004 Chevy Impala right head light won't come


There are right and left fuses for the headlights. The dimmer switch and headlight switch provide the ground circuit.
Do you have power at the fuse ?

Feb 15, 2013 | Cars & Trucks

1 Answer

If my left headlight was blown does that mean my right headlight won't work until I replace it ?


No not at all head lights do not work like that it sounds like you have a bad head light switch

Nov 27, 2012 | Cars & Trucks

1 Answer

Headlight on rx 300 lexus won't work even after changeing the bulb


have a tester handy.unplug the light and then turn on the headlights.with tester on 12 volts test plug to see if you have 12 volts. if not the plug is properly corroded or shorted .

Nov 24, 2011 | 1999 Lexus RX 300

1 Answer

Can I replace the headlights in a 2007 escalade with a 2011 model will this work there is a slight change in the plug same number of wires just diff plug


you are right, the wiring is almost identical. I would just change the plug on the new headlight to the old style plug. make sure that you get the wires going to the right spots though.

Mar 08, 2011 | 2011 Cadillac Escalade

1 Answer

2007 air filter replacement


The headlight assembly is accessed from inside the fender well. There are two pop out plastic rivets and a small (4mm? head) body screw that secure the fender liner to the fender. Those need to be removed. Pull the fender liner back enough to work your arm into the fender. Locate the wiring to the headlight and grasp the plug. Rotate it to the left until the bulb is free of the reflector. Pull the lamp and wiring out from behind the fender liner. Remove the bad bulb. There is a release tab on the plug. Insert the new bulb into the plug. DO NOT touch the bulb glass. The oil from your skin can cause the bulb to explode when it gets hot. Hold the plug and work the bulb and wiring back to the original position. It is a little easier to look through the headlight lens as you work the bulb back into the reflector. Turn the plug to the right until it is properly seated. Replace the two pop out rivets and the body screw.

You should replace the headlights in pairs. I didn't and the right bulb went out in a couple more weeks when the weather was much worse. The right bulb was more of a pain to replace than the left, probably because I am right handed.

Hope this helps.

Feb 03, 2009 | 2007 Chevrolet HHR Special Edition

1 Answer

Head light 07 HHR


The headlight assembly is accessed from inside the fender well. There are two pop out plastic rivets and a small (4mm? head) body screw that secure the fender liner to the fender. Those need to be removed. Pull the fender liner back enough to work your arm into the fender. Locate the wiring to the headlight and grasp the plug. Rotate it to the left until the bulb is free of the reflector. Pull the lamp and wiring out from behind the fender liner. Remove the bad bulb. There is a release tab on the plug. Insert the new bulb into the plug. DO NOT touch the bulb glass. The oil from your skin can cause the bulb to explode when it gets hot. Hold the plug and work the bulb and wiring back to the original position. It is a little easier to look through the headlight lens as you work the bulb back into the reflector. Turn the plug to the right until it is properly seated. Replace the two pop out rivets and the body screw.

You should replace the headlights in pairs. I didn't and the right bulb went out in a couple more weeks when the weather was much worse. The right bulb was more of a pain to replace than the left, probably because I am right handed.

Hope this helps.

Nov 24, 2008 | 2007 Chevrolet HHR Special Edition

Not finding what you are looking for?
2002 Chevrolet TrailBlazer Logo

38 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8265 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...