- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
? 7:25
https://www.youtube.com/watch?v=E48b4F_-PJw
Jan 31, 2011 - Uploaded by syyenergy7
Ignition Coil in Gen I distributor, Chrysler Sebring convertible. ... I have a 1997 Sebring Convertible and it has the 2.5v6. .....Some reason I thought this was about replacing the cam position sensor, now I realize it's actually the ...
hey Gregg it should be there,i included an image of it if its what you need let me know its a new image program for me ,answer by clicking on comment below .
Verify you have spark, those are known to have issues with the camshaft sensor in the distributor. I have put 2 distributors in my daughter's 97 sebring jxi, did the same thing.
Sir your Fuel Pump is located in your Fuel Tank Must remove ta nk to replace,Tip: Replace the Strainer /Filter on Pump Also. Or your Warranty will be invalid;
It's very tight under the hood with these cars, you just have to unscrew the two (or three) long bolts holding the entire headlamp enclosure in, pull the headlamp enclosure out and rotate the bulb to remove it. Some sebrings have a cylindrical plastic guard around the main bulb, that just screws off as well. You might have to adjust your headlights after you change them.
×