Question about 2007 Chevrolet Impala LS Sedan New Cars

Open Question

Replacing rear speakers in 2006 chevy impala. how do you get the old ones out of the window

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 206 Answers

SOURCE: 2005 chevy impala rear driver power window stopped going up.stuck

If neither switch works it is a bad connection at the motor or bad ground or a bad motor. Remove the door panel unplug the motor push the switch and see if there is 12volts on the wires if there is the motor is bad There are small brushes in the motor that go bad tap on the motor while pushing the switch if it works that way replace it

Posted on Mar 29, 2009

Ad
emissionwiz
  • 76109 Answers

SOURCE: How do I program my key for my 2006 Chevy Impala?

Add Duplicate Key (PK3 or PK3+ key)
1. Insert an existing key into the ignition cylinder.
2. Turn the ignition cylinder to ON (RUN) and back to OFF.
3. Remove the existing key and, within fifteen seconds, insert the new key
and turn it to ON (RUN).
4. The security light will light up for two seconds to indicate success in programming
the key into the vehicle.
Originate New Master Key (PK3 or PK3+ key)

1. Insert new key into ignition cylinder and turn it to the ON (RUN) position.
The security light on the dash will illuminate and stay on for ten minutes.
2. When the security light goes out, you have one minute to start the next
step. Turn the ignition cylinder to OFF and then back to the ON (RUN)
position. The security light on the dash will illuminate and stay on for ten
more minutes.
3. When the security light goes out, you have one minute to start the next
step. Turn the ignition cylinder to OFF and then back on the ON (RUN)
position. The security light on the dash will illuminate and stay on for ten
more minutes.
4. After the security light has gone off the third time, the key has been programmed
into the vehicle’s computer and will operate the car. It has replaced ALL the
previous electronic key codes and is the ONLY key programmed into the
vehicle’s computer.

Add Duplicate Key (PK3 or PK3+ key)

1. Insert an existing key into the ignition cylinder.
2. Turn the ignition cylinder to ON (RUN) and back to OFF.
3. Remove the existing key and, within fifteen seconds, insert the new key
and turn it to ON (RUN).
4. The security light will light up for two seconds to indicate success in programming
the key into the vehicle.

Posted on May 20, 2009

  • 14 Answers

SOURCE: 2002 chevy impala window problem

Try to replace the window regulator. Sounds like worn out guide wheels.

Posted on May 24, 2009

cooper0365
  • 347 Answers

SOURCE: 2005 impala. Rear window defroster is not working

they have a fuse and a rely make sure the wire end is on the conector on the window

Posted on Oct 02, 2009

motor1258
  • 6674 Answers

SOURCE: 2006 Chevy Impala reduced engine power

best bet is to stop in at a Pep Boys, Autozone, or similar big autoparts seller, and ask for free trouble code scan, which should pinpoint area causing problem. If not obvious by codes, what is necessary to repair the problem code, get back to us with those codes and we will be glad to assist you further. Better this way, takes away the guess work, and saves you money, as well as getting it right the first time.

Posted on Dec 12, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

What size allen needed to remove break pads


Allen wrenches usually come in a set, try 3/8.

Apr 30, 2016 | 2008 Chevrolet Chevrolet Impala LS

1 Answer

How do you replace speakers on a 2006 chevy malibu?


Well if you want you can simply task the old ones out from the speaker cases and simply replace them with whatever you wish that will work and fit, or remove the wires from the outside terminals, of the old ones, and use those to connect up to any new ones, they only have two wires Plus and Minus, and are clearly marked. Just use the old speakers as a guide.

Oct 12, 2011 | 2006 Chevrolet Malibu

2 Answers

2006 chevy impala rear window heater does not work


check the fuses the fuse for this can be found in your owners manual. if the fuse is good and the lite for the rear defrost lites up the rear heater strips on your rear window may be bad the only repair for that would be having the rear window replaced

Jan 24, 2011 | 2006 Chevrolet Impala

1 Answer

Rear defrost dont work on my 2006 chevy impala. Found relay but has no fuse. all fuses under hood are good and the ones on passinger side kick panel are good. light lites up on switch but no power at rear...


it works off heater fuse and has relay which you found and is good .the problem is a breake in the heating elements in the window. they can be fixed w/out replacing window . check each element in window w/ohm meter .put aluminum foil around the pos. lead on meter to check the wire.

Dec 26, 2010 | 2006 Chevrolet Impala

1 Answer

On my chevy 2006 impala the rear tire momitor sensors are not working all the time . Should I replace them.


you only need to replace what is bad it has to be tested with a tpms scanner, and you only need to replace the one, some just need to be calibrated after replacing. let me know what happens

Mar 23, 2010 | 2006 Chevrolet Impala

2 Answers

Were is the crank sensor located at on 2006 impala


Usually ,& depending on engine, is located on the rear side of the engine block behindthe crankshaft balancer. Good luck!

Nov 26, 2009 | 2006 Chevrolet Impala

2 Answers

2005 chevy impala rear driver power window stopped going up.stuck


If neither switch works it is a bad connection at the motor or bad ground or a bad motor. Remove the door panel unplug the motor push the switch and see if there is 12volts on the wires if there is the motor is bad There are small brushes in the motor that go bad tap on the motor while pushing the switch if it works that way replace it

Mar 29, 2009 | 2005 Chevrolet Impala

Not finding what you are looking for?
2007 Chevrolet Impala LS Sedan New Cars Logo

Related Topics:

402 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8269 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...