Question about 1996 Jeep Grand Cherokee

2 Answers

Cruise control 96 grand cherokee

96 grand cherokee cruise wont come on. If there is a light on dash, it wont light up .I checked all the fuses with a test light and all are good except one and there is no power to either side of that one

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer
Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Jeep Master
  • 4,340 Answers

Also check brake switch adjustment, it is the interrupter.

Posted on Jul 28, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can you check the check engine bulb of 96 grand cherokee without removing dash


you put the key on without starting and it does light ! you should have a little 5 amp fuse or are there other things not working to check all fuses put key on and with test light check all the fuses you find at both ends you should have power at both ends some fuses wont have power like headlights or defrost till you turn it on sometimes the outside fuse box gets corrosion inside on the wires and causes a open circuit as well if you always owned the truck you know that nobody has taken out the light in the dash :) if not sure then take out the dash cluster (speedo) and look if the bulbs are not there or burnt

Jun 17, 2014 | 1996 Jeep Grand Cherokee

1 Answer

I can't get the vehicle information center in my 96 Jeep grand Cherokee to work no lights, warning, nothing, can't locate exact fuse but all looks good?


I would start with the Fuse Box under the hood. Start by pulling the Fuse's 1 at a TIME!! I have done it befor time & time agean. It's probley by the Battery. It's a black box that has " Main Fuse " or something alone that line. There just like the Fuses under the Dash, BUT BIGGER! They can be hard to tell if they blew. I have done it so, much that I know. If it's not that I would check the Fuse Box in the Dash. Jerry Dunn

Jan 30, 2013 | 1996 Jeep Grand Cherokee

1 Answer

Cruise control will not come on im not sure if


There is a fuse layout in the owner's manual... and on the fuse box lid.

Are you certain it is #20 - and not a 20A fuse?

It is either 15A (blue) or 20A (yellow)

Without a diagram - you can verify all of them quite easily with a simple $4 test lamp from the parts store.

With the key in the ON position test for voltage at both sides of each fuse.
Whichever fuse does not light on both tabs is a bad fuse.
You could have them all tested in 2 minutes.

Thanks!!

Jul 28, 2010 | 1996 Jeep Grand Cherokee

1 Answer

My Jeep Grand Loredo 2004 cruise control went out


Check the vacuum hoses it is easy to notice if one is missing or not. If that doesn't work, I'd try the cruise control switch. Hope this helps

Apr 05, 2010 | 2004 Jeep Grand Cherokee

1 Answer

The read out on dash says service electric brake system,brakes seem to work ok and when i select cruise control it will not set


Do your brake lights work? Your cruise is tied in with your brake lights. If your brake lights are stuck on or there could be a bad switch or bad wire on the switch then your cruise wont work.

Oct 28, 2009 | 2005 Jeep Grand Cherokee

1 Answer

Cruise control just quit working


Check fuses/relays and make sure they are all good; if so check the electrical wiring/connectors in the dash. Jeeps are notorious for loose wires in the dash.

Sep 01, 2009 | 1995 Jeep Grand Cherokee

3 Answers

2003 jeep grand cherokee cruise control not working.


Ok, the '03 Jeep Grand Cherokee uses a small vacuum line to control the servos. Since your light comes on, it's obviously getting power. 9 out of 10 times it's the vacuum hose.
Pop the hood and look on the passenger side towards the back for the engine coolant reservoir. It's most likely underneath it so you may have to remove the res. Check the vacuum hose and all vac. connections then check the electrical connections. If that's not the problem, check the cruise control connection to the throttle linkage.
If that still doesn't do it, you may need use scan tools and diagnostic procedures that are out of the scope of home mechanics.
Wish ya luck!

Jun 18, 2009 | 2003 Jeep Grand Cherokee

1 Answer

Cruise control 1998 plymouth grand voyager not working


Check fuses under dash on drivers side, & fuse & relay box under hood on drivers side. I.D. for fuses & relays under hood on underside of cover.

Apr 09, 2009 | 1998 Plymouth Grand Voyager

Not finding what you are looking for?
1996 Jeep Grand Cherokee Logo

Related Topics:

405 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...