Question about Ford Ranger

1 Answer

The speedometer and tackometer do not work on my son's 2002 Ford Ranger, the speedometer is electrical and assume the tackometer is also. How do I fix these problems?

Posted by on

Ad

1 Answer

First thing to check out is the instrument cluster fuse located underneath the drivers side steering wheel. Flip the plastic fuse box cover over and it will have a diagram that will show the exact location. Pull the fuse out and replace it. If the fuse is ok then you will need to check adn replace the speedometer cable that connects to the transmission. You will need to remove the instrument cluster and unscrew the end of the cable to remove it. If your cable is ok then the plastic gear inside your transmission may be broken

Posted on Jul 28, 2010

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Turn signal harness 2002 ford ranger 14a320 diagram turn signal connector wire colors and ppin location


images for Turn signal harness 2002 ford ranger

Ford explorer turn sinal problem got fixed - YouTube

? 3:23
www.youtube.com/watch?v=I2SUGIvYAWc
Jul 12, 2013 - Uploaded by Raybob216 My 04 exployer left turn signal and break light not working fix loose wires behind ... bulb and come to find out wire had popped out of the harness. ... How to Change Ford Explorer 2002 Flasher Relay for Hyper Flasher Relay ... How To Install Replace Turn Signal Wiper High Beam Switch Ford Ranger 95-98 ...

Oct 07, 2015 | Ford Cars & Trucks

1 Answer

I have 2002 Ford ranger 2.3l n I broke two teeth on the harmonic balancer that the sensor reads I assume will this stop the engine from starting?


most definitely
there has to be set pulses for the position sensor to work
normally both the crank position sensor and the cam shaft position sensor work together and send signals to the ECM and if one signal is not in sync with the other , the ecm thinks something is wrong and shuts down the engine.

May 07, 2015 | 2002 Ford Ranger

1 Answer

2001 ford ranger speedometer needle stays on 30 mile than increases as you move


Chances are you need another speedometer, or send that one to a shop to have it fixed.

Oct 07, 2012 | 2001 Ford Ranger Regular Cab

1 Answer

2005 ford ranger cruise control doesnt work


For ford ranger cruise control troubleshooting,click the link below :----http://technoanswers.blogspot.in/2012/02/2005-ford-ranger-cruise-control-not.html
----------This will help.Thanks.Helpmech.

Feb 07, 2012 | 2005 Ford Ranger

1 Answer

Car will not start, the speedometer is not working, and the tackometer not working either


speedo and tach have nothing to do with starting. fuel,spark,and air do. search these needed elements and components first. tach should work once car starts

Jan 13, 2011 | Ford Escort Cars & Trucks

1 Answer

All dashboard out speedometer , gas guage ,tackometer. cant locate fuse or relay


there is one under hood.one down by the drivers kick panel. ( this is the main fuse box) another is by the passengers kick panel.

Aug 20, 2010 | 2002 Toyota Camry

2 Answers

My 1995 ford ranger pick up speedometer, radio, break lights, wipers and turn signals dont work


On the ford ranger wiper motor not working, this is how u fix it. I am a licenced autobody mechanic for mercedes and my son bought a ford ranger and of course the wipers were not working-neither did the dome light and door chime.I told my son too replace all fuses ,switch and motor. And still nothing.Remove radio there is a pcm in behind- ours was unpluged. When we plugged it in the door bell would not shut off and the dome light stayed on. In stead of unplugging the pcm remove the light if wd40 does not work on the door latches. And to stop the door bell ringing remove the plastic cover around the ignition and their is a single wire with a blue connector just remove the wire it is the wire closest to the key and tape up the end and problem solved guarenteed . my email is frameman127@yahoo.ca I will walk u through it .

Jul 24, 2010 | 1995 Ford Ranger Supercab

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

413 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

Marvin
Marvin

Level 3 Expert

81400 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22359 Answers

gerry bissi

Level 3 Expert

4376 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...