Question about Cars & Trucks
Posted by Anonymous on
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: how to disable a cobra
first restore any cut ignition wires where the alarm was spliced in to the original starting system, theis will be near the steering column, then disconnect the fuse to the unit, this in most cases under the hood near the battery.
Posted on Aug 25, 2008
1. Close and lock all doors with the driver’s side power lock/unlock switch.
2. Insert key into ignition and remove it from the ignition key cylinder at least six times within 10 seconds. Your Hazard
Lamps will flash if you have performed this step successfully. NOTE: Withdraw key completely from ignition cylinder
each time. If this procedure is performed too fast, system will not enter programming mode.
3. Insert key into the ignition cylinder and turn to the ACC position.
4. Within 5 seconds, push ANY button on the remote transmitter. Your Hazard Lamps should flash. NOTE: Do not press
the button more than one time in the above step. If the button is pressed more than one time, the programming
procedure will not be successful.
5. If there are any remaining transmitters (including the old ones), unlock then lock all doors using the driver’s side
power lock/unlock switch and within 5 seconds, push ANY button on the next remote. Your Hazard Lamps should
flash. Repeat this step for each transmitter (including any existing transmitters).
6. Turn the key to the OFF position, remove keys from the ignition, unlock doors using the driver’s side power lock/unlock switch and open the driver side door.
Posted on Nov 16, 2009
SOURCE: my battery went flat and
If this aftermarket alarm is playing up then the best bet is to remove it completely before it packs up completely and leaves you stranded out in the middle of nowhere on a cold dark night.Any after market alarm or remote start is problematic when they get older and highly prone to going wrong owing to the complexity of the circuitsa and the fack they use inferior integrated circuits made in china
Posted on Jan 21, 2011
Tips for a great answer:
Oct 21, 2017 | Mitsubishi Cars & Trucks
Nov 01, 2015 | Cars & Trucks
Jul 06, 2015 | Mitsubishi Cars & Trucks
Jul 12, 2012 | Cars & Trucks
Feb 20, 2011 | Mitsubishi Passenger Cars & Trucks
Jan 21, 2011 | Mitsubishi Colt Cars & Trucks
Sep 12, 2010 | Mitsubishi Sigma Cars & Trucks
Jan 15, 2010 | Mazda MX-5 Miata Cars & Trucks
Sep 23, 2018 | Suzuki Cars & Trucks
933 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: