Question about Cars & Trucks

1 Answer

My daughter has a 2000 mazda b3000 pickup. She just recently had the fuel pump replaced and when she got it back the windshield wipers don't work the transmission slips and the speedometer doesn't work what could be causing this problem

Posted by Anonymous on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 62 Answers

You might want to check the fuse for the wiper motor, if good, turn the wipers on, tap lightly on the wiper motor and see if it starts working, if it does work after tapping on it, the wiper motor might be failing or the circuit board. The trans slip and no speedometer could be caused by a faulty VSS (Vehicle Speed Sensor) this sensor, I think, is located in the rear differental and is very easy to change, Hope this helps, Gary

Posted on Jul 28, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Will a 3.0l engine from a 1999 mazda b3000 work in a 2000 lincoln ls


The answer is "NO"

Why would you even think that was possible ?

Mar 22, 2014 | 2000 Lincoln LS

3 Answers

Where is located the fuel pump for mazda b3000 2003


Check in the next diagram (click over imge for zoom)...

zjlimited_1151.jpg

Fig. Exploded view of the B Series Pick-up fuel filler assembly and pump mounting

May 01, 2011 | 2007 Mazda B3000

2 Answers

Flasher Relay location- 1998 Mazda B3000 pickup 4x4


it's basically a stand alone relay... most times... look for a relay by itself and often round. my ford winstars flasher relay was actually located in the fuse box under the drivers side dash. it was blue and larger then the other relays so that may be a clue to you.

Robert

Please take a moment to rate this solution

Feb 02, 2009 | 1998 Mazda Pickup

1 Answer

How do I find the on/off safty switch for fuel line in a 1998 Mazda Pickup truck.


the inertia fuel shut off switch is located behind right side of instrument panel , below glove box . not knowing which model truck , i checked b3000 and b2500 and b4000 , all are in the same place .

J5

Jan 20, 2009 | 1998 Mazda Pickup

1 Answer

2000 Jeep Cherokee Windshield Washer


You have a motor for the front and rear washer. Check the fuses. If the intermitted wipers does not work, there is a relay under the dash near the steering colum that needs to be replaced.

Jan 01, 2009 | 2000 Jeep Grand Cherokee

1 Answer

Replacing the heater core in 2000 mazda b3000


From Haynes Repair Manual #36071, Ford Ranger Pickups 1993 - 2005 and Mazda Pickups 1994-2005 B2300, B2500, B3000, B4000: (1)Disarm the airbag system; (2)allow the cooling system to completely cool down; (3)using a thick cloth for protection, turn the radiator filler cap to the first stop; (4)step back and let the pressure release; (5)once the pressure has been released, completely drain the cooling system; (6) working within the engine compartment, loosen the ****,ps on the heater hoses at the engine compartment side of the firewall, twist the hoses and carefully sepseparate them from the heater core tubes; (7)plug or cap the heater core tubes to prevent coolant from spilling into the passenger compartment when the heater core is removed; (8)place a plastic sheet on the floor of the vehicle to prevent stains if the coolant spills; (9)remove the instrument panel; (10)remove the PCM heat sink and ground strap; (11)remove the heater plenum chamber; (12)separate the heater core from the heater plenum chamber; (13)installation is the reverse of the removal with the following additions; (a)fill the cooling system; (b)run the engine, check for leaks and test the heater

Aug 21, 2008 | Mazda B3000 Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

261 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...