Question about 2005 Dodge Grand Caravan

3 Answers

My locks quit workng is there a setting or fuse?

My locks quit workng s there a setting or fuse?

Posted by on

Ad

3 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

I had this happen to me as well. I did the D10 fuse and it worked for a while. Started idelling rough. Changed Plugs, wires and coil pack only yo have the PCM/BCM go out. PCM is going to have to be replaced. If you start getting the same problems and can afford it, I recommend getting a brand new PCM/BCM and letting your dealership install and flash it! Get a new one, don't just flash the old one!

Posted on Aug 05, 2010

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Same prob pull fuse IOD out and put it back in place .I have to do this about every week . Also lights turn off when driving.Piece of junk.Also belt rattle. Good luck
Jerry

Posted on Jul 29, 2010

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Dodge Master
  • 76,164 Answers

What the other expert is doing is resetting the Body Control Module that controls the lock circuit, it (the BCM) will fail completely soon and nothing will work, it will cause a noi start.

Posted on Jul 29, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I HAVE A 2002 E150 ECONOLINE VAN. THE RADIO, THE HORN, TURN SIGNALS AND ER FLASHER QUIT WORKING.


Could be a lose connection in the dash , more then likely . Who replaced the gauge an drive indicator ? The horn / cruise control /turn signals / radio all share a common ground point it looks like ,G203
G203 Behind upper LH side of I/P, near cowl
Maybe after gauge & drive indicator replacement connection became lose . None of these componets share a power supply (fuse) I can't send picture of the location of G- 203 sorry ! Instrument cluster would need to come out to see the ground .

Dec 26, 2016 | 2002 Ford Econoline Cutaway

1 Answer

Mercedes Benz e220 1998 all rear electronics are not working


Has the hot cable from the battery to the rear fuse block got power to it . If not check at the battery end for a melted fuse wire or faulty circuit breaker .

Apr 07, 2014 | Mercedes-Benz E-Class Cars & Trucks

1 Answer

Horn not workng where the fuse for it


If you have an owners manuall the fuse diagram is in the manual. You will have to check the central junction box which is in the dash under the drivers side of the vehicle, The horn relay is in the battery junction box under the hood. Both diagrams are in the owners manual.

Feb 11, 2011 | Ford Explorer Sport Trac Cars & Trucks

1 Answer

Ford f250 diesel 2004 i had to replace batteries. put in new alternator. right after gauge clusrer went out. at the same time tow haul mode stopped workng and all automatic functions like auto lights and...


what you need to do first is find out what was the original problem. If you had bad batteries only,, then this should not of happened, But if you installed a defective alternator or did not disconnect the battery before replacing it you could of damaged something importtant if a short accured that did not pop the main fuse first. All the imputs for all functions come thru computers and only a proper diagnostic is going to find the problem. since you already stated you checked the obvious. Your going to need a diagnostic scanner to proceed.

May 17, 2010 | 2004 Ford F250

1 Answer

87 dodge dakota heater blower stopped workng


The blower resistor will burn and smell without blowing a fuse

Feb 04, 2010 | 1987 Dodge Dakota

1 Answer

Lights quit flashing when Key Remote Locks or Unlocks car


The body controller for some reason has lost it's setting most likely. The dealer can reset with their "Star Scan" diagnostic tool. Many settings such as flash on lock or horn sound on lock can be turned on or off.

Mar 06, 2009 | 2002 Jeep Liberty

2 Answers

2005 town & country electric door locks quit working


the door locks are controlled by the body computer and one of the switches may be bad. When you pull the fuse you are clearing the computer codes and the locks work fine until that switch acts up. once the computer sets a code for a shorted or stuck switch all switch inputs are ignored until you pull the fuse and reset everything. Could also be a bad wire to the switch or a bad computer.

Jan 16, 2009 | 2005 Chrysler Town & Country

2 Answers

06 PT cruiser rear wiper stopped working and I can not find fuse box where exactly is it


the fuse box is under the hood basically behind the battery but if the power windows are workng the fuse is good.you may have a wiring problem or a bad motor

Jan 07, 2009 | 2006 Chrysler PT Cruiser

Not finding what you are looking for?
2005 Dodge Grand Caravan Logo

193 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...