Question about 1998 Plymouth Voyager

2 Answers

I have a 99 Plymouth voyager 3.3 flex fuel which stalls constantly on initial take off only. had the crank sensor replaced twice. was previously getting po140 code which is o2 sensor which i havent replaced but every mechanic i talk to says o2 sensor wont cause it to stall like that now i don't have check engine light even the dealership cant find the problem. another mechanic told me its not fuel system problem because it has good pressure for some reason he thinks it could be something in ignition because when u try to restart without turning key back first it doesn't read anything. if u turn the key back for 15 to 30 seconds it restarts fine but if you press too much on gas it will stall again. is it possibly a short in ignition? and and why would pressing the gas pedal cause it to stall how could i possibly find the problem?

Posted by on

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 66 Answers

Check your TPS (throttle position sensor)

Posted on Apr 03, 2011

Ad
  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

Check the engine mounts. A friend of mine had a similar problem whereas acceleration caused a stall because the engine was rocking out of position.

Posted on Aug 09, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

1999 plymouth voyager was driving and then all of sudden stalled and won't restart


R u getting spark if not could be a crank sensor. When this happen to us the engine blew. Could also be starter

Mar 14, 2015 | 1999 Plymouth Voyager

2 Answers

Engine diagram for a 1998 plymouth grand voyager


I don't have a diagram at hand but the sensor it's located on the transmission so, on the driver side on the transmission and it is kind of hidden so you got to look good for it. This takes a reading off the flex plate rather than a tone or exiter ring the crank.

Jun 27, 2012 | 1998 Plymouth Voyager

1 Answer

I have a 99 plymouth voyager i had to replace the waterpump and fuel pump now it wont start it cranks over but wont start any ideas ??


We will need more information from you. But you could check to be sure you have gas and that the gas is getting to the engine. For example, is the fuel pump working? Are there any leaks in the fuel line? Is the Gas Filter Plugged? You could also check to see if you are getting Spark at the plugs. Perhaps when you put everything back together from replaceing the waterpump or fuel pump you missed something. Remeber the basics. You need Fuel, Spark and Air for your engine to run. Track it down and be sure you have all 3

Jun 08, 2011 | 1999 Plymouth Voyager

1 Answer

Where is hatch sensor for 1998 Plymouth grand voyager (3.3 FLEX)?


its built into the lock mechanism lock might have to be replaced try adjusting it first. should be able to move the latch.

Jan 06, 2010 | 1998 Plymouth Grand Voyager

1 Answer

1989 plymouth voyager stalls after warm up


you need to check what the fuel pressure is at the reed valve on the fuel rail when it dies,you need at least 50psi

Dec 03, 2009 | 1989 Plymouth Grand Voyager

1 Answer

Radiator fan will not kick on 1999 voyager flex fuel ,i already replaced coolant sensor


Check you replaced the correct fan control sensor switch (not the temperature gauge sender),
Check fan fuse,
Check fan control relay operation,
Check fan will run if power applied directly to it.

Sep 06, 2009 | 1999 Plymouth Voyager

1 Answer

98 voyager stalls out when given gas


do you have a service engine light?
if so change catalyst. and both o2 sensors.

Mar 10, 2009 | 1998 Plymouth Voyager

1 Answer

Anyone know about fuel pumps PLEASE HELP!!


ask a dealership talk to a service tech

Feb 17, 2009 | 1999 Plymouth Grand Voyager

2 Answers

1997 Voyager Van Stalls then Starts


most of times stalling problems are related with crankshaft sensors have your crank sensor replace and see if this will take care of your problem

Jun 03, 2008 | 1995 Dodge Caravan

Not finding what you are looking for?
1998 Plymouth Voyager Logo

277 people viewed this question

Ask a Question

Usually answered in minutes!

Top Plymouth Experts

yadayada
yadayada

Level 3 Expert

77499 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8826 Answers

Are you a Plymouth Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...