Question about 2004 Buick Rendezvous
Pretty common problem with these. Here's a guide to learn how to fix GM instrument clusters yourself, I used it to fix mine and it worked great.How to guide for Rendezvous instrument cluster repair
Posted on Oct 05, 2010
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Turns out this is a common problem for the Rendezvous.
I took it to a mechanic and after he tested to see if all the speed sensors were working with his handheld computer reader, (because there is no speedometer cable anymore) He reset the needle by turning the key about 25 times as far as possible without starting the vehicle. The speedometer needle came back a bit each key turn till it reached zero. It's been working fine since.
Posted on Dec 11, 2009
the panel has trim around it youll have to take the trim off pry under it with a straight edge or flat screwdriver this will give you access to the screws that keep the cluster in place undo the screws usually phillips head and pull the panel out on the back side of the panel you will see tabs protruding from the panel thise is where your bulbs are housed theres one for each bulb locate the one that has your blown bulb in it turn counter clockwise and pull up this will release the holder pull the bulb out push the new one in and reverse the process to reinstall.
Posted on May 04, 2010
SOURCE: The speedometer on my 2004
It could be a bad connection in the wires between the speed sensor and the Engine Control Module (ECM). Is the ECM setting a speed sensor code? It could also be a bad Instrument Panel Cluster (IPC) module. Are there any codes in the IPC? It could be a problem with the data line between the ECM and the IPC, in which case you will be getting "U-codes" out of your ECM. (U-codes indicate communication problems between the various modules in your car) A good scan of you vehicle's computer systems would be the best place to start.
Posted on Dec 16, 2010
Tips for a great answer:
Mar 01, 2015 | 2003 Buick Rendezvous
Mar 11, 2010 | 2004 Buick Rendezvous
Feb 10, 2010 | 2002 Buick Rendezvous
Nov 11, 2009 | Buick Rendezvous Cars & Trucks
Oct 25, 2009 | 2004 Buick Rendezvous
Jan 06, 2009 | 2002 Buick Rendezvous
2,379 people viewed this question
Usually answered in minutes!