Question about 2004 Ford Ranger

1 Answer

My Ford 2004 Ranger will not start. Replaced battery, took starter off and had checked, it is ok, replaced ignition switch, still nothing.

Posted by on

  • kdklugger Jul 22, 2010

    Very, very helpful, Thanks

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Ford Master
  • 78,936 Answers

Please expalain what it is doing, the starter doesn't turn the engine? do u have a factory security system?

Posted on Jul 22, 2010

  • 5 more comments 
  • kdklugger Jul 22, 2010

    It will not crank and I do not have a security system

  • yadayada
    yadayada Jul 22, 2010

    when u say you replaced the ignition switch, do u mean the actual electrical switch near the base of the steering colum or the lock cylinder? do u have a 12 volt crank signal tio the starter solenoid when the key is held in start position? please check this for me

  • yadayada
    yadayada Jul 22, 2010

    this is the ignition starter switch




  • kdklugger Jul 22, 2010

    Yes, the actual electrical switch at the base of steering wheel column. Yes, I get signal, but no click.

  • yadayada
    yadayada Jul 22, 2010

    then the positive battery cable is defective or the ground connection to the engine is defective, does the starter solenoid click or clunk

  • yadayada
    yadayada Jul 22, 2010

    can u call me if u are in the USA, I'm home right now, 925-459-0571

    emissionwiz

  • kdklugger Jul 22, 2010

    No click or clunk

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2006 Ford taurus won't start, starter, altlernator, battery replaced, ignition starter switch, neutral safely switch changed, still nothing


I looked at info for your security system, it is starter motor disable. I didn't see 06 ford Taurus in my database, so I looked at 05.
Battery has a full charge and battery connections all good?
We can usually do some tests to see if starter motor will crank the engine, but, if the security is the problem, it still won't start.
You can check for applicable trouble codes? Try a different key?

Feb 16, 2018 | 2006 Ford Taurus

3 Answers

Truck turns over and starts when I connect battery???? No key is even in the ignition.


Maybe the ignition is bad- or your starter solenoid stuck in engaged position?

Mar 29, 2013 | 2000 Ford Ranger SuperCab

3 Answers

94 Ford Ranger won't start. Replaced starter and solenoid and battery checks okay. Suspect a ground problem. Where do I begin?


To start, why did you replace the starter? Was it bad? Did you have it checked? Is the new one good? And what is the battery reading in Volts? Does it click at all, crank at all? Did you check the fusible link? Follow the hot wire from the battery to the link, a giant fuse type thing, check it out. Is the ground wire from the battery bolted to the frame or body, and engine? Is the starter connected right? Are the terminals on the battery posts squeaky clean? they have to be or it won't do anything. Check the electrolyte fluid and see what the gravity of each cell is. The battery with one weak cell is a dead duck. The voltage should be at 13.5 at all times. The posts have got to be clean and tight, the starter should at least click. Do you have an anti-theft device somewhere in there you forgot about? Check it out. Hope this helps.

Oct 21, 2010 | 1994 Ford Ranger Supercab

1 Answer

My 95 ford ranger won't start. it's a manual transmission with 227,000 miles on it. We've replaced the solenoid, the battery, and the starter and alternator are both working fine. When we try to start it,...


With a manual tranny, check the clutch pedal position sensor/switch. It should be activated by the clutch pedal arm. So follow the clutch pedal arm up under the dash to find it.
You need to lower steering column to get at the ignition switch. I'm not talking about the key cylinder.
Any testing make sure the tranny is out of gear and functional parking brake is set. I guess you have already done some testing? Is there a security system?
If you need wiring diagram, holler.

Aug 05, 2017 | 1995 Ford Ranger Supercab

1 Answer

1992 FORD TAURUS STATION WAGON 3.8L V-6 WON'T START, NOTHING


Was this all done by a licensed repair shop ?
Have you tried moving shifter through all gears while holding key to start, just to see if any kick at all? (safety neutral switch may be faulty)

Aug 02, 2009 | 1992 Ford Taurus

1 Answer

Ford ranger not starting


check the main fuse, and relay, if ok check for power to the starter solynoid if yes then starter may be faulty. check power to switch also

Jul 22, 2009 | 2003 Ford Ranger Regular Cab

Not finding what you are looking for?
2004 Ford Ranger Logo

Related Topics:

69 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

78936 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

fordexpert

Level 3 Expert

5676 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...