Question about 2004 GMC Yukon
2004 yukon ac blows hot air on drivers side even if the control on that side is turned down
EASY FIX-- your blend door actuator has a grease drip inside on a sensor. It's a easy fix. I just fixed mine in 20 minutes. See how to here==> http://www.tahoeyukonforum.com/forum/showthread.php?t=17741
Posted on Dec 27, 2013
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
You have dual zones that are controlled by temperature actuators the passenger side has lost its memory or has gone bad you can put it in self programming by disconnecting the battery for ten minutes then hook it back up start the truck turn the temperature control on but do not touch any other controls let it go thru the self programming for about 6 to 7 minutes then select your temperature you want if it still does not work properly you may have a bad actuator or a bad connection at the actuator
Posted on Jun 03, 2009
You need to replace the drivers side temp actuator that is located on the left side of the HVAC box. It is retained by 3 screws and is fairly easy to replace.
Posted on Aug 29, 2009
SOURCE: I have a 2004 GMC
Remove the Positive Battery Terminal, leave the Negative Terminal connected. Wait 30 minutes. Attach the Positive Terminal. Verify temperature settings is around 70 degrees. This procedure has been known to resolve computer settings.
Posted on Aug 27, 2008
The actuator has gone bad. They can be programed, and reset, but usaly they are bad, and that will only patch the problem for a while.
Posted on Jun 19, 2009
this problem is caused by a defective air temperature control blend door actuator motor, it is about center of dadsh in air ducting, it moves the door that diverts air for cold from ac or hot from heater, you must remove the dash to repace it, about a 15 hour job fotr a home mechanic with a factory repair manual, nearly imposs without one.
Posted on Sep 04, 2009
Tips for a great answer:
Jan 21, 2016 | Cars & Trucks
Jun 01, 2012 | 2004 Chevrolet Silverado 1500 Crew Cab
Mar 05, 2010 | 2004 GMC Yukon
Oct 03, 2009 | 2004 GMC Yukon
Oct 02, 2009 | 2004 GMC Yukon
Sep 19, 2009 | 2004 GMC Yukon
Aug 08, 2009 | 2004 GMC Yukon
Oct 02, 2008 | 2005 GMC Yukon Denali
Aug 25, 2008 | GMC Sierra Cars & Trucks
Jul 07, 2008 | 2004 GMC Yukon
Mar 27, 2017 | 2004 GMC Yukon
2,325 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: