Question about 1994 Mazda MX-3

1 Answer

Im looking for a pic of the serp belt so i know how to put it back on

Posted by Anonymous on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Mazda Master
  • 6,826 Answers

You don't need that. All you have to do is use the 'under over' method.
You see, the pulleys are designed to ride on the 2 different sides of the serpentine belt.

Simply put the flat ungrooved side against the flat pulleys, and put the grooved side on the grooved side of the next pulley, until you've done all but one, the idler or tensioner pulley.

Use a breaker bar to move the tensioner pulley in a way that the serpentine belt can be slipped on.

And that's it.

Posted on Jul 22, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Screaming noise coming from motor gets louder as rpm changes gears sounds like something screaming


if not alternator ,power steer pump,air con ,water pump \
serp belt tensioner or idle pullys

check crank pully is not running out of true

could be serp belt squeal
replace the serp belt

2004-dodge-ram-1500-slt-4.7l-rlvjad5rfjfbkkiwkdzzrtel-1-0.jpg

Mar 11, 2017 | Cars & Trucks

1 Answer

What's your question?how do I put on a audi 500SEL 93 fanbelt


its a serp belt


pull on the tension pulley in the right direction to take the pressure of the belt

replace with the new serp belt

watch the layout for how it flows up and around

26242972-pljds40jqnkuhve4e544jdii-5-0.jpg

Jul 22, 2016 | Audi Cars & Trucks

1 Answer

2008 Suzuki Truck XL-7 2WD 3.6L MFI DOHC 6cyl belts


2008? USA car?
the car came with a sticker on the rad, top showing the belt.
3.6L is chain cam so is not that. leaving serp belt.
if you google this, you will find it. (takes work)
or use alldata.com and log in.
?
https://suzukipitstopplus.com/Products/1158-2008-xl7-service-manual.aspx

it only costs $4 to look, and im not spinding for you....

Dec 15, 2014 | Suzuki Cars & Trucks

1 Answer

I have a 2000 pontiac montana and its making a load noise by the belts and its leaking some kind of oil and the water temp is maxed out


its probably the water pump pretty simple to change locate the large smooth pulley on top of the serp belt take out the 4 bolts take off the serp belt remove the smooth pulley the water pump is under the smooth pulley take out the 5 bolts on the water pump and the water pump will come out on the new water pump the gasket will only go on one way make sure you turn it the right way so the holes line up use a little gasket sealer to hold in the right place replace with new pump on the tension pulley there is a 3/8 square hole that you can put a long handled socket or breaker bar in to loosen the tension on the on serp belt so you can streatch the belt back over the pulleys i only wish the thermostat was as easy to change.

Jan 10, 2011 | 2000 Pontiac Montana

2 Answers

1992 Dodge Dynasty 3.3l installing serpentine belt


They do make a belt tensioner tool that is flat....stays out of the way better than a wrench or socket..
Was this the belt that came off this engine?
Is the belt the correct length?
It should just fit on easily.
Is the rest of the belt fully seated in the other pulleys?
Sometimes you put the belt on the tensioner pulley before finishing by installing the belt onto a/the flat idler stationary pulley last....then release the tensioner.

Sep 06, 2009 | Dodge Dynasty Cars & Trucks

3 Answers

Replace a serpentine belt correctly


if no sticker under the hood to show the route. go to the auto parts store and ask for a belt diagram. if the don't help, try your local repair shop. best of luck.

Aug 06, 2009 | 1994 Jeep Grand Cherokee

1 Answer

How do I replace Serpentine belt on 92 gmc Sanoma.


should just have to turn the tensioner and pull belt off alternator pulley, release tensioner ,remove belt. install new belt, apply tension to tensioner and put belt back on alt. pulley.will require 1/2 in ratchet or serp. belt tool.

May 18, 2009 | 1992 GMC Sonoma

1 Answer

Serpintiene belt tensioner replacment


personally it is a really tight area to work in and if you are not experienced with mechanics i would get a pro to do it as if you misalign the pulley or break any bolts on it you are really screwed try jew the mechanic down as it is only about a 1 hour job if you know what you are doing

Nov 05, 2008 | 1993 Plymouth Voyager

1 Answer

Toyota Echo 2002 A.C. and Serp Belt


Plug the connector back in & pull the AC fuse. You probably have the beginnings of a "locked up" compressor. The pulley will turn if the engine and the AC is off. When the compresser clutch is engaged, and the compressor is locking up, it will overheat & snap the serp belt.

Sep 25, 2008 | 2003 Toyota ECHO

Not finding what you are looking for?
1994 Mazda MX-3 Logo

Related Topics:

86 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

Marvin
Marvin

Level 3 Expert

81400 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8841 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...