2001 Chevrolet Tahoe Logo
Posted on Jul 21, 2010

My gas gauge on my GMC yukon 2000 is not working appropiate

1 Answer

A

Anonymous

You will need to replace the sending unit inside the gas tank. GMC and Chevrolet trucks are well known to have this problem

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

I put gas in my 2000 gmc yukon and the gas gauge stopped working

when you turn the ignition on dose the needle move ? even just a bit should jump. if don't jump it may be the gauge its self not working.. if you model has the display type I.E miles left of fuel check that on the display should say how meany mile of fuel you have left to drive with.
0helpful
1answer

The gas gauge isn't working, 2000 yukon

THE FUEL LEVEL SENDING UNIT IN FUEL TANK IS FAULTY IS GAS GAUGE DONT WORK,OR CHECK FUEL PUMP WIRES COULD HAVE DAMAGE BROKE LOOSE GROUND WIRE.
2helpful
1answer

I have a 2000 yukon and the gas gauge isn't working how can I fix it

Locate the fuse box underneath the drivers side steering wheel and replace the instrument cluster fuse. If your fuse comes out ok then the float inside your gas tank is stuck.
2helpful
1answer

My gas gauge & speedometer gave out on my 2004 gmc yukonis there any recall on this type of situation?

Yes there is a recall for erratic gauge readings. They will supply new instrument cluster and labor to install it at no charge to you. Tell the service writer that your gauges only work sometimes and they'll help you out. worked for me!!!
0helpful
1answer

On my 2003 Yukon, the gas gauge does not work, and the speedometer works intermitten. Any Ideas?

defective fuel gauge sending unit, poss defective DC stepper motor in speedometer.
0helpful
1answer

Needing to know why my Yukon's gauges stopped working.

You need to replace cluster, 99-02 Silverado GMC all will work even if it has a trans temp truck is pre wired for it. I put a 02 Denali cluster in my 01 silverado no problems. GM can reprogram hours and odometer if you want.
14helpful
2answers

2006 Yukon Denali, oil pressure gauge malfunction

Most likely the oil pressure sensor is bad. Its located in the very rear of engine on top of bell housing area.
1helpful
1answer

2004 GMC Yukon won't start if less than 1/4 tank of gas

sending unit for gas gauge is not correct
4helpful
1answer

Gas gauge flucuates to empty and full so we never know if we have enough gas. What to do?

It is a common problem. It is a faulty in tank sender. You can just replace the sending unit by removing tank.
Not finding what you are looking for?

459 views

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

john h

Level 3 Expert

29494 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...