Question about 1995 Jeep Grand Cherokee
Locate oil drain plug on oil pan,engine off. take out oil plug with wrench, drain oil into a big pan or similar. when oil is drained remove oil filter and put new one on, put some new oil on filter seal with finger then screw on to car as tight as you can get it by hand. do not use a fiter wrench to tighten filter only hand tight. use oil filter wrench to take off old oil filter. when filter is on put plug back in oil pan and tighten. then add your new oil to reccomended oil level.
Posted on Jul 21, 2010
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
12 is a battery disconnect within the last 50 start cycles and 55 means the end of the diagnostic cycle. Basically the computer found nothing wrong. The 12 code may seem incorrect if you haven't disconnected the battery recently, but from my experience the 12 code shows up almost all the time regardless.
Posted on Dec 16, 2008
I thinking tha you are fix the CHMSL (Central High Mounted Stop Light); review the Service Manual, the section ZJ-Secc-8L-Lamps (page 7, fig. 11).
I hope help you with this, good luck (remember rated this help).
Posted on Sep 16, 2009
Tips for a great answer:
Sep 27, 2016 | 1995 Jeep Grand Cherokee
Jan 23, 2016 | 1994 Jeep Grand Cherokee
Feb 16, 2011 | 1995 Jeep Grand Cherokee
Nov 01, 2010 | 1995 Jeep Cherokee
Mar 13, 2010 | 1995 Jeep Grand Cherokee
Feb 20, 2010 | 1995 Jeep Grand Cherokee
Jan 19, 2010 | 1995 Jeep Grand Cherokee
May 25, 2017 | 1995 Jeep Grand Cherokee
500 people viewed this question
Usually answered in minutes!