My 97 explorer low beams do not work the hi beams still do?

look closer at high beam switch. known too get trash in it. turn switch cap while pushing it

98 Explorer No High Beams Problem - Ford Explorer and Ranger ...

https://www.explorerforum.com/forums/showthread.php?t=374129

Nov 15, 2012 - 16 posts - ‎8 authors
98 Explorer XLT 4X4 - No high beams. I've read thru many threads here and other places about this. Pulled and checked every fuse - all good ... Fog Lights Off When High Beams Activated - Normal?
19 posts
Nov 30, 2015
Headlights not working (not MFS, Fuses, or bulbs)
12 posts
Feb 24, 2015
97 explorer no low beams high beams
3 posts
Nov 4, 2013
no headlights in 96
15 posts
May 7, 2009
More results from www.explorerforum.com

If Dual beam bulbs, low beam on light may be blown. I just had the same problem on my '91 Camaro. Could also be a simple fuse replacement, find correct fuse, , replace, and recheck.

HAve you check fuses?

the element in your halogen bulb for high beam has blown, replace the bulb

yes there is have you checkt the high beam ligts. there is one lamp tho the low beam ligts (50w) usaly and there is one lamp tho the high beam ligts usaly (100w)

replace driver module relay .it controls the low beam lights.

change the bulb the bulb has two elements one of those are bad

Check the relay switch located under the hood. Also check the Low Beam Light bulbs.

Any more questions let me know!

Thank you for using Fix Ya!
Good Luck!

Don't forget to rate the overall satisfaction of this solution.

It is most likely the multifunction switch has a bad contact, also pull and check the main hdlight switch for burned connectors.