Question about 2002 Buick Rendezvous

1 Answer

Remove and replace the water pump buick rendezvou 2003 cost and do it yourself instructions . can i do it myself concerned with loosening the serpentine belt and needing special tools?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Guru:

    An expert who has written 7 tips or uploaded 3 video tips

  • Master
  • 382 Answers

1. Drain the cooling system until the coolant is below the level of the water pump. 2. Remove the drive belt guard. 3. Loosen the water pump pulley bolts. 4. Remove the drive belt. 5. Remove the water pump pulley bolts. 6. Remove the water pump pulley. 7. Remove the water pump bolts. 8. Remove the water pump. 9. Remove the water pump gasket. 10. Clean the water pump mating surfaces. Installation Procedure 1. Install the water pump gasket. 2. Install the water pump Notice: Refer to Fastener Notice in Service Precautions. 3. Install the water pump bolts. Tighten the bolts to 10 Nm (89 inch lbs.). 4. Install the water pump pulley. 5. Install the water pump pulley bolts. 6. Install the drive belt. Tighten the water pump pulley bolts to 25 Nm (18 inch lbs.). 7. Install the drive belt guard. 8. Fill the cooling system
Visit my Blog here

Posted on Jul 21, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1998 Buick Le Sabre - Water pump needs to be replaced, Serpentine Belt constantly slips off and its overheating


The dealer cost is about 475 and a shop cost is 385 and do it yourself is 106,since your getting other work done means it sounds fair,3 hours to do water pump.Here's a link on doing the water pump. Repair Guides Engine Mechanical Water Pump AutoZone com here's the water pump. Water Pump 1998 Buick Lesabre 6 Cylinders 3 8L SFI OHV AutoZone com plus a gallon of extended life antifreeze full strength.And a tube of sealant and gasket.

Feb 01, 2014 | Buick Cars & Trucks

1 Answer

WHAT IS THE HEATED OXYGEN SENSOR BANK 1 SENSOR? WHERE IS THE SENSOR HEATER? CAN i FIX IT MYSELF? ALSO,,, EGR SYSTEM FAULT,,,WHERE IS THE PRESSURE SENSOR? CAN i fix it myself?


Oxygen sensor bank 1 is the first sensor in the exhaust system. It should be located between the exhaust manifold under the hood and the catalytic converter. The one after the catalytic converter is the bank 2 sensor. The sensor heater is located in the sensor itself...it can only be replaced as a whole. You should be able to change this yourself with the correct size wrench... just unplug sensor, loosen and remove. Replace with new sensor the same as removed. This could be causing the egr system fault as well.

Jul 10, 2011 | 2003 Buick Century

1 Answer

03 buick rendezvou owners manual free download


http://www.extendedgmwarranty.com/owners-manual/buick/2003-Buick-Rendezvous.pdf

quick enough?

there's the link, i look forward to your feedback!!

Sep 04, 2010 | Buick Rendezvous Cars & Trucks

1 Answer

1998 Buick LeSabre Limited water pump replacement ?


. Remove accessory electrical junction block,
and position aside. Loosen water pump pulley bolts.
Remove drive belt. Remove water pump pulley
bolts and pulley.
. Remove water pump bolts, water
pump and gasket. To install, reverse removal proced
ure using NEW gasket. Fill and bleed cooling
system.

Mar 28, 2010 | 1998 Buick LeSabre

1 Answer

The car cigerette lighter does not work how do i fix it i checked the fuse box but i dont know wut the cigerette lighter is listed under its a 2003 biuck rendezvou


your fuse #32 of 20amp is out under the hoodbox, replace with anotherone or the spare #67 under the hoodbox. =] problem solved.

Dec 22, 2009 | 2003 Buick Rendezvous

1 Answer

Should i take my car to the shop or do it myself? water pump on a 1997 buick skylark.


if yo u have the tools and yo u are mechanicaly inclined do it yourself , get a manual and follow instructions in sequence and you should have joy

Nov 07, 2009 | 1997 Buick Skylark

2 Answers

03 buick rendezvou window problems window falls down in door


The part numbers for the two plastic clips are ;;15286776 and 15286777.
Ian

Feb 26, 2009 | 2003 Buick Rendezvous

1 Answer

How to change a water pump on a 1999 Buick Century 3100?


the water pump on the 3.1 isnt to hard to change ...
  1. Disconnect the negative battery cable.
  2. Partially drain the cooling system into a suitable container.
  3. Remove the drive belt guard.
  4. Loosen the water pump pulley bolts before removing the drive belt. This should help keep the pulley from turning as the bolts are loosened.
  5. Remove the drive belt. Remove the water pump pulley bolts and remove the pulley.
  6. Remove the water pump bolts and separate the pump from the engine front cover.

Dec 09, 2008 | 1998 Buick Century

Not finding what you are looking for?
2002 Buick Rendezvous Logo

2,658 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

Marvin
Marvin

Level 3 Expert

85108 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...