Question about 1984 Ford F 250

1 Answer

How to replace a 1984 Ford F-250 heater core - 1984 Ford F 250

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,272 Answers

The procedure to replace heater core on ford f-250 is as follows:---
Disconnect battery ground cable. 
Disconnect cable from temperature blend door and the mounting bracket from top of heater assembly. 
Disconnect blower motor and resistor electrical connectors. 
Disconnect and plug hoses from heater core. 
Working under instrument panel,remove 3 nuts attaching left side of heater assembly and right side of plenum to dash. 
remove 2 screws attaching right side of heater assembly to dash, then lift heater assembly out of vehicle. 
Remove heater housing plate attaching screws, nut and bolt and the plate. 
slide heater core and seal out of heater assembly.
The hardest part is getting to the heater hose connections to the heater core. You have to dig around behind the A/C lines and it is under the cowl under the hood. The fittings are snap type.

Thanks. Keep updated for any more query. You can rate this solution and show your appreciation.

Posted on Jul 29, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need a diagram for replacing heater core on 1969 f-250 defrost heater


You have an easy one. Follow the heater hose to the firewall. Remove them. remove the bolts holding the core in place and pull out the core. Reinstall. Newer ones, you have to remove the entire dash.

Nov 07, 2015 | Cars & Trucks

1 Answer

1994 F-250 Heater Core


Answer for a 1995 F250:

Remove the glove-box door. Behind that is the heater core cover on the interior, passenger side of the firewall. Remove that cover and there is the heater core. Open the hood and look where the heater hoses enter the front right passenger area of the exterior side of the firewall. Disconnect the two heater hose clamps and you can then remove the heater core.

Jan 13, 2012 | 1994 Ford F250 Supercab

1 Answer

How hard is it to replace the heater core


They can be a huge pain in the ***. They are usually under the dash. Just depends on your mechanical skill level.

Jan 13, 2011 | 1984 Ford F 250

1 Answer

Where do the heater core hoses attach to engine on an 1988 f-250 with air


If it is necessary to remove the heater assembly, the cooling system must be drained before removing the heater core.
When a heater core leaks, a new heater core is installed or the old one repaired.
Heater Housing
  • The heater housing is usually under the dash and must be removed to gain access to the heater core.
  • Procedures for replacing the heater core vary with the year, make, and model of car. It threfore necessary to consult the manufacturer's repair manuals for the proper procedure for replacement.
f74-01.gif The heater housing is disassembled to get to the heater core. Heater Core
  • Remove the access panels(s) or the split heater/air conditioning case to gain acess to the heater core.
  • Remove the heater coolant hoses.
  • Remove the cable and/or vacuum control lines (if equipped).
  • Remove the heater core securing brackets and/or clamps.
  • Lift the core from the case. Do not use force. Take care not to damage the fins of the heater core when removing.
  • To reinstall the heater core, reverse the removal steps.
When the heater core leaks and must be repaired or replaced, it is a very difficult and time-consuming job primarily because of the core's location deep within the firewall of the car. For this reason always leak test a replacement heater core before installation.

Dec 23, 2010 | 1988 Ford F 250

1 Answer

Leak at heater


bad heater core needs to be replaced

Dec 23, 2010 | 1984 Ford F 350

2 Answers

How to replace the heater core


Inspect/Replace If it is necessary to remove the heater assembly, the cooling system must be drained before removing the heater core.
When a heater core leaks, a new heater core is installed or the old one repaired.
Heater Housing
  • The heater housing is usually under the dash and must be removed to gain access to the heater core.
  • Procedures for replacing the heater core vary with the year, make, and model of car. It threfore necessary to consult the manufacturer's repair manuals for the proper procedure for replacement.
f74-01.gif The heater housing is disassembled to get to the heater core. Heater Core
  • Remove the access panels(s) or the split heater/air conditioning case to gain acess to the heater core.
  • Remove the heater coolant hoses.
  • Remove the cable and/or vacuum control lines (if equipped).
  • Remove the heater core securing brackets and/or clamps.
  • Lift the core from the case. Do not use force. Take care not to damage the fins of the heater core when removing.
  • To reinstall the heater core, reverse the removal steps.
When the heater core leaks and must be repaired or replaced, it is a very difficult and time-consuming job primarily because of the core's location deep within the firewall of the car. For this reason always leak test a replacement heater core before installation.

Nov 28, 2010 | 1984 Ford F 250

1 Answer

How do you replace the heater core in 1987 ford f 250 with a/c


access is through the glove compartment.
very easy job.

Nov 10, 2010 | 1987 Ford F 250

1 Answer

How to install the heater coil in my f-250 truck?


we call this a heater core, and here is how it is replaced. No need to drain the cooling system, just undo the heater core hoses at the firewall under the hood then pull glove box inset, undo bolts for access cover that is over heater core behind the glove box insert, remove cover, remove old core, put new core in, reinstall cover, reinstall glove box, done. I did these in 45 minutes at the Ford dealer I worked at.

Dec 10, 2009 | 1995 Ford F250

1 Answer

How to install a heater core for a ford f-250


Disconnect heater hoses. Remove glove box. remove cover over heater core. Secured by 8mm bolts. replace heater core.

Nov 04, 2009 | 1987 Ford F 250

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

385 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

Marvin
Marvin

Level 3 Expert

82285 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22382 Answers

gerry bissi

Level 3 Expert

4382 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...