Question about 2004 Nissan Quest

Open Question

Interior lights on a nissan quest will not come on

Posted by on

Ad

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad
jimboz4
  • 305 Answers

SOURCE: how to take off tire pressure light off on nissan quest 2004

remove the tire pressure light fuse from fuse-box....this should work

Posted on Jul 23, 2009

Ad
johnjohn2
  • 5763 Answers

SOURCE: 2006 Nissan Quest interior lighting not working at

if they are correct in there diagnoses then yes the dealer would have to reprogram it, dont know why it stoped working , you should ask the dealer why and if i were you tell them your lights dont work and is programing the correct solution, its hard for me to say without checking the problem, good luck,

Posted on Nov 13, 2009

iambanshee74
  • 3489 Answers

SOURCE: p0440, Nissan quest

this will have to do with a small evap leak. check your gas cap and make sure it is being tightened down all the way. you might need to get a replacement. if that is needed, go to a nissan dealer to get it. cheers

Posted on Dec 23, 2009

tneubauer
  • 437 Answers

SOURCE: Interior door panel

The only difference that I know of is the badge names. All of the parts should cross. I would take a mental note or picture with a digital camera and visit a local salvage yard that will allow you in too look for yourself.

Posted on Jan 25, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I prevent the interior lights from coming on when driver's door is open - disable the sensor on the driver's door -- 1999 Nissan Quest.


Can you tape a coin or two onto the door at the spot that hits the light switch? If not, just remove the bulbs.

Dec 09, 2014 | 1999 Nissan Quest

1 Answer

How do I remove the rear sliding door interior panel on 2001 Nissan Quest?


Mostly clips, screws hold the handle on and bezel around it has clips that can carefully be pried off.. A door panel tool should be used to enage and pry panel clips off

Aug 22, 2014 | 2001 Nissan Quest

1 Answer

Why no power from battery to anything on my Nissan Quest?


There are large fuses to protect the major circuits. Are you sure the cable connections are clean and tight ? Have you checked the major fuses for power, and the ground connection ?

Jul 27, 2014 | 1997 Nissan Quest

1 Answer

My headlights dim when I put on my breaks


Yes it can be,with a weak battery the alternator has to work harder,in doing so you will loose the alternator faster,going down the road and the interior light flickering,hard to say without seeing it,

Dec 26, 2012 | 1996 Nissan Quest

1 Answer

All interior dome light are out on 2004 quest, fuse checked are good


The interior light are controlled by the Body Control Module (BCM).
Check the fuse for the BCM. If the fuse is OK, then try to disconnect the car battery for about 10 minutes to reset the BCM. If resetting the BCM doesn't work you may have to replaced it.

Jun 23, 2011 | 2004 Nissan Quest

1 Answer

How do I replace the licence plate light on a Nissan Quest 2005


you have to remove the plastic piece to get to the bulbs and tailgate handle , but it is attached with a pair of bolts. You have to remove the interior lower trim on the tailgate door and then two bolts are accessible. Remove the bolts and then gently pry off the piece as there are two plastic retainers. ----------------- Thank you.

Jan 24, 2011 | 2005 Nissan Quest

1 Answer

2006 Nissan Quest interior lighting not working at all. Repair shop says a module needs to be reprogrammed. What does that mean and is it something Nissan has to do?


if they are correct in there diagnoses then yes the dealer would have to reprogram it, dont know why it stoped working , you should ask the dealer why and if i were you tell them your lights dont work and is programing the correct solution, its hard for me to say without checking the problem, good luck,

Nov 13, 2009 | 2006 Nissan Quest

1 Answer

The signal lights for my 2000 nissan quest don't work


Have you checked the Thermal flasher, commonly called a flasher. It is a small metal can about the size of a 50 cent piece, about 1 inch high and is located in the interior fuse panel.

If you go to one of the major auto parts store like Auto Zone, they will check it for you and install a replacement for you. Those folks are very good about that.

Hope this helps Good luck Loringh Please leave a rating for me THANK YOU

Nov 10, 2008 | 2000 Nissan Quest

Not finding what you are looking for?
2004 Nissan Quest Logo

Related Topics:

158 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

78919 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...