Cars & Trucks Logo

Related Topics:

A
Anonymous Posted on Jul 07, 2010

My blinker lights stop blinking and the fuse box doesn't have a cover to show which fuse is which so i do not no which fuse is for the blinker lights.

1 Answer

Renee Knafel-Bullock

Level 3:

An expert who has achieved level 3 by getting 1000 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Master:

An expert who has achieved Level 3.

  • Cars & Trucks Master 404 Answers
  • Posted on Jul 20, 2010
Renee Knafel-Bullock
Cars & Trucks Master
Level 3:

An expert who has achieved level 3 by getting 1000 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Master:

An expert who has achieved Level 3.

Joined: Jul 19, 2010
Answers
404
Questions
1
Helped
152171
Points
1156

Change the bulb sometimes one of the filaments where out they are combo bulbs usually 1157 1156 bulbs back stop and tail combo bulbs, or check owners manual, this is depending on your type of vehicle but thats probably it.

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1helpful
1answer

My Turn signal lights just stopped working! My Hazards and all lights work ! Which Fuse do I check to find the problem? My fuse box doesn't have a cover.

Hard way , but pull out each fuse , with pointed Nose pliers ( Makes it easy ) and check each fuse , Long way to do it , but needed to find yoiur fault
0helpful
1answer

Fuse box

What kind of car? I have a 2005 Chevy malibu that the light quit blinking, in my case it was the connectors in the bulb socket. Somehow when you remove the old bulb it pushes them back so they no longer connect and the blinker stops working. If this is the case you just need to bend them back but be careful not to break or you can by new outlet assembly for $20. Also the blinkers didn't have a fuse just a relay switch if this goes out you would have problem with multiple lights
1helpful
1answer

I have a 1997 ford l8000 dump truck and the turn signal will not flash. the blinker light comes on, but will not blink.

if both front and back lights r working its the flashing unit under dash or in fuse box
0helpful
1answer

Hi my blinker is not working how can i repair that

Sometimes your blinker will stop working if a signal light bulb has burned out. Check your bulbs first. If all the bulbs are ok then check your fuse box for a blown fuse and lastly check the blinker itself in the fusebox. Your owners manual should show you where to find the fusebox and blinker.
3helpful
1answer

My turn signals stopped working and the fuse is good and everything else in the car works even the hazard lights. and backup lights witch the maual says the turn signals are paired with. the switch will go...

It sounds like either the blinker switch witch is in the colume or the flasher witch should be in the fuse box under the dash . Does the blinker lite up but not blink ?
1helpful
1answer
0helpful
1answer

Toyota blinker makes noise when the blinkers aren't on.

You need to replace flasher unit. This regulates the flashing speed. Check under the drivers side dash (it may hang amongst wires or in a fuse box) or under bonnet where all the large fuses are (these will be in a covered box). Sounds like under dash because of noise. Google search flasher units to see what the look like.
0helpful
1answer

I am trying to find the blinker relay on a 1988 chevy blazer....

its the fuse. wen a bulb blinks fast and cuts in and out its the fuse for the blinker. buy it at pep boys or any part place
0helpful
1answer

Blinkers

If you can turn the blinker on left or right and the light comes on but doesn't blink......Open the drivers door, there is a fuse box, On the side of the dash.. The relay willl be a small silver canister looking relay in with the fuses.. put your finger on it and turn the blinker on.. you should feel and hear a click...( With the key in the on position ).. That is what needed replaced if it doesn't keep clicking...Thats the turn signal relay... What makes it blink.......Hope this helps..
Please rate this solution if it helps... Thank You.....
0helpful
1answer

BLINKERS NOT WORKING

Ok this a way different problem than i thought it was first thing to look at is the relays and fuses and connectors to make sure they are not loose, pull them out and reconnect them. Engine running = vibration. Engine not running = no vibration. If thats good your left light blinker may be shorted to your constant power. Your right blinker may have an intermittent open. I looked at turn signal flashers online they are about $10 each, maybe swap em out then return if it does not fix it. It really sounds like a wiring problem though so look at the back side of where the light is connector and tell me what you find if anything
Good luck
Not finding what you are looking for?

134 views

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...