Question about 2000 Jeep Grand Cherokee

2 Answers

How to replace spark plugs on 2000 jeep cherokee classic 6 cyl.? Also does 2000 cherokee have inline fuel filter?

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Jeep Master
  • 14,036 Answers

TO REPLACE SPARK PLUGS YOU REMOVE COIL PACK MOUNTING BOLTS THEN REMOVE THE COIL PACK WITH BOOT OVER THE SPARK PLUG.YOU HAVE 6 INDIVIDUAL COIL PACK TO EACH CYLINDER. YOU NEED A 3/8 RATCHET WRENCH - LONG 3/8 EXTENSION -SPARK PLUG SOCKET - SPARK PLUG GAUGE.AND TORQUE WRENCH.THE 2000 MODEL JEEPS FUEL FILTER INSIDE THE TANK.1993 - 1996 MODEL JEEPS FUEL FILTER LOCATED LEFT SIDE OF THE VECHICLE NEAR THE FUEL TANK.

Posted on Jul 20, 2010

  • 1 more comment 
  • sabow Aug 04, 2010

    when changing plugs the coil packs won't pop out,what is the mech secret to removing,i;ve got the whole top of the engine components removed and I STILL CAN;T REMOVE.PLEASE GIVE ME THE KNOWHOW.THANKS

  • Jonah Oneal Aug 04, 2010

    TO REMOVE IGNITION COIL REMOVE THE ELECTRICAL CONNECTOR FROM COIL RAIL BY FIRST PUSHING THE SLIDE TAB UP THEN PRESS THE RELEASE LOCK ON BOTTOM OF CONNECTOR AND PULL THE CONNECTOR OFF.IF THIS DONT HELP YOU NEED A HAYNES REPAIR MANUAL WITH PICTURES TO SHOW YOU HOW TO REMOVE THE COILS PACKS.

  • russ mealy Jul 08, 2013

    changing 4 cyl to 6 cyl on 2000 jeep wrangler

×

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Idles eraticly after warmup,replaced cam sensor,crank sensor,coils/boots,2000 grand cherokee,6cyl

Posted on Jun 29, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2007 jeep grand cherokee larado 6 cyl where is the fuel filter located on the car


There is no inline fuel filter, this is true of most every manufacturers vehicles. There is a fine mesh nylon sock at the inlet to the fuel pump.

Apr 20, 2017 | Jeep Cars & Trucks

1 Answer

I have changed the spark plugs in my car an now the firing order is wrong. how do i fix it??


im sure its running by now but the search on jeep always lands here.
so ill answer,
no engine size stated? so no answer, but..
the I6 is four liter is, 153624
the 4.7l is on page 62, engine chapter. V8
18436572
the #1 cyl is front on inline 6
the #1 cyl. is same on v8 and v6, one cylinder is just tad more forward
that be cyl 1 and bank 1 too. in this case left bank is forward 1.

Aug 15, 2013 | 2000 Jeep Grand Cherokee Limited

2 Answers

How do I tell if my Jeep is a 6 Cyl or an 8 Cyl?


6 CYLINDER IS A INLINE ENGINE LONGER ENGINEIT HAS SIX SPARK PLUGS. THE V8 ENGINE HAS 2 VALVE COVERS. LEFT BANK RIGHT BANK IT HAS 8 SPARK PLUGS..

Jan 03, 2011 | 1996 Jeep Grand Cherokee

1 Answer

My jeep will not start, why?


didint it start after yo replaced the parts or before.

Jul 16, 2010 | 1997 Jeep Cherokee

2 Answers

91 jeep no spark


wd 40 your flywheel sensor plug

Sep 02, 2009 | 1996 Jeep Grand Cherokee

1 Answer

I need the spark plug wiring for a 1993 jeep 4l from the engine to the distributor inline 6 cyl


The firing order can usually be found cast onto the intake manifold
d89ea9b.jpg

4.0L engine Engine firing order: 1-5-3-6-2-4 Distributor rotation: Clockwise
42e3dc6.jpg

Good luck (remember rated this help).

Aug 30, 2009 | 1993 Jeep Cherokee Country

3 Answers

1995 Jeep Cherokee Country straight 6 cyl 4.0L: I


First of all, the fuel pump is generally located in the fuel tank, not always though. Yours probably is, in did not research it. The fuel electric fuel pump turns on only when the ignition key switch is turned to the start position and then left on. A series of one or two relays along with a pressure monitor in the fuel rail delivery system may or not cycle it on and off depending on design. Enough of that. I suggest that you remove the spark plugs to see if they are oil/heavy cabon deposits.If so, professional attention is reguired. One more thing you could try is replacing the spark plug wires. the may be old/worn out/damage. This would give the engine spark a stronger spark,if worn and also replace the spark plugs.

Jul 30, 2009 | 1995 Jeep Cherokee

1 Answer

Causes for no spark on 94 jeep cherokee please


Well it could be many things, But have you relpaced the dist. cap and rotor, within the last 15,000 miles or wires and plugs??? next step is the coil ? then it gets fun. like timing. but I think most jeeps with a Inline 6 have a bullet proof engine for the most part. As we all know there is plenty of semi's on the road. well the same set up is there. as an Inline Jeep. I would have to say 90% of semi's on the road are inline 6 cyl. engines. and may of them go to 1million miles.
so plugs,wires, cap, rotor and ignition coil. that is a good starting point.

Mar 24, 2009 | 1994 Jeep Cherokee Country

Not finding what you are looking for?
2000 Jeep Grand Cherokee Logo

1,903 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

Marvin
Marvin

Level 3 Expert

82313 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22382 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...