Question about 2000 Nissan Quest

Open Question

RE4FO4A transmission diagram. Where is the oil cooler return line.

Posted by on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

SE. How do I remove transmission oil cooler line?


How To Install Replace Transmission Cooler Lines 2001-06 ...

? 5:45
https://www.youtube.com/watch?v=SFEXmxxBMK8
Oct 31, 2013 - Uploaded by 1A Auto Parts
How To Install Replace Transmission Cooler Lines 2001-06 ... In this video, 1A Auto shows you how to remove, replace and install leaking or broken Transmission Cooler ... How To Install ReplaceDo a Front Brake Job 2001-06 Chrysler ... 2003 Dodge Ram 3500 trans cooler replacement how to 11-24-12 ...

Search DODGE MAGNUM Cooling > Transmission Oil ...

www.factorychryslerparts.com > ... > Transmission Oil Cooler, and Lines
DODGE MAGNUM Cooling > Transmission Oil Cooler, and Lines. ... Please let us know what we can do to achieve this goal. ... Our inventory covers the following years of MAGNUM: 2005, 2006, 2007, 2008, ... Click X to remove the keyword.

Leaking Transmission Cooler Line Replacment Recommendations ...

www.dodgeintrepid.net > ... > General Discussion (First Generation)

Dec 12, 2015 | 2006 Dodge Magnum

1 Answer

How to replace oil; cooler on this year


  • Service and Repair
Oil Cooler Replacement

Removal Procedure

  1. Raise and support the vehicle. Refer to Vehicle Lifting.
  2. Drain the engine oil and remove the oil filter housing.
89116492

  1. Loosen the oil cooler outlet (1) and the inlet (2) lines from the engine block.
  2. Lower the vehicle.
  3. Remove the intake plenum.
  4. Remove the intake manifold.
89116493

  1. Disconnect the following electrical connectors from the water crossover:
    • The engine coolant temperature sender (2)
    • The engine coolant temperature sensor (4)
84936658

  1. Remove the water crossover bolts (1).
  2. Remove the water crossover upper and lower seals (2).
84942881

  1. Loosen the upper heat shield bolts on the left side of the exhaust manifold.
89116496

  1. Remove the oil cooler outlet line from the engine oil cooler.
  2. Remove the oil cooler inlet line from the engine oil cooler.
84942883

  1. Note the positioning of the 4 seals.
84972057

  1. Position the oil feed and return,lines out of the way and secure with mechanic wire.
  2. Remove the engine oil cooler, inlet and outlet nuts (1).
  3. Remove the engine oil cooler cover bolts (2).
84942883

  1. Remove the engine oil cooler cover.
  2. Remove the engine oil cooler.
  3. Clean all sealing surfaces.
Installation Procedure
84972056

  1. Install the engine oil cooler.
  2. Apply a 2 mm (0.08 inch) bead of RTV silicone sealant, GM P/N 12346240, in the groove around the engine oil cooler cover.
  3. Install the engine oil cooler cover.
Notice: Refer to Fastener Notice in Service Precautions.
84972057

  1. Install the engine oil cooler cover bolts (2). Tighten the engine oil cooler cover bolts to 30 Nm (22 ft. lbs.).
  2. Install the engine oil cooler inlet and outlet nuts (1). Tighten the engine oil cooler inlet and outlet nuts to 20 Nm (15 ft. lbs.).
  3. Reposition the oil feed and return lines.
84942883

  1. Install the oil cooler outlet and install the oil cooler inlet lines to the engine oil cooler. Use 4 new seals.
Tighten the oil feed and return lines to 30 Nm (22 ft. lbs.).
84936658

  1. Install the water crossover:
    • Position the crossover.
    • Install the upper and lower seals (2).
    • Install the water crossover bolts (1). Tighten
Tighten the water crossover bolts to 30 Nm (22 ft. lbs.).
  1. Connect the electrical connectors at the following locations:
    • The engine coolant temperature sensor (4)
    • The engine coolant temperature sender (2)
  1. Install the intake manifold.
  2. Install the intake plenum.
  3. Raise the vehicle.
89116492

  1. Install the oil cooler outlet (1) line to the engine block. Tighten the oil cooler outlet (1) line to 30 Nm (22 ft. lbs.).
  2. Install the oil cooler inlet (2) line to the engine block. Tighten the oil cooler inlet (2) line to 30 Nm (22 ft. lbs.).
  3. Install the oil filter housing to the engine block. Tighten the oil filter housing to 45 Nm (33 ft. lbs.).
  4. Lower the vehicle.

Dec 22, 2014 | 2001 Cadillac Catera

1 Answer

WHAT IS THE TRANSMISSION OIL COOLER HOSE DIAGRAM


It doesn't matter. But usually the left side of the cooler lines go with the left side of the radiator. Cooler lines run both ways, unless you deal with Dodge, stupid check valves. I take them out....

Apr 29, 2014 | 2002 Mitsubishi Lancer

1 Answer

Radiator leak transmission cooling line


The current trans cooler is built into the radiator. Just do a search for transmission oil coolers and you'll see what they're talking about. They can also simply repair the existing lines. That would be much cheaper

Nov 27, 2017 | Chevrolet Impala Cars & Trucks

2 Answers

Identification of transmission oil cooler lines. Inlet v Return


may need to go to a transmission shop and let them tell you which is which..only other way is to open a line and see which way the fluid runs..

Feb 08, 2014 | 1998 Chevrolet Lumina

1 Answer

Does the 2004 Toyota Corolla auto transmission get it's lubrication from the oil cooler return line?


Never Flat Tow any transaxle

Have the front wheels on a dolly

I won't comment any more ,I once owned a trans shop

Nov 24, 2012 | 2004 Toyota Corolla

1 Answer

Connecting an auxiluary transmisson cooler in series on a 1999 Cheve S/10 pickup


You may have to break a line loose and run the engine a moment to see which way the flow is. Then you can identify the return line.

Nov 24, 2012 | Cars & Trucks

1 Answer

Where is the return transmission line located on a 2005 3.7l jeep grand cherokee. By the radiator. But is it on the driver side orcthe passenger side? Is it the top or bottom line?


Generally speaking ... oil goes in hot and comes out colt ... heat rises ... while I an not familiar with your particular car, my guess would be that the hot oil goes in the top and is cooled as it flows down through the cooler and returns to the transmission via the bottom line.

Give it a try ...

Jun 06, 2011 | 2005 Jeep Grand Cherokee

1 Answer

Oil line


the upper is the in line from the trans cooler the lower is the return line // both screw in to the side of the trans

Feb 20, 2009 | 1990 Jeep Cherokee Limited

Not finding what you are looking for?
2000 Nissan Quest Logo

Related Topics:

310 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

Marvin
Marvin

Level 3 Expert

82149 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22382 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...