Question about 2005 Acura NSX

Open Question

Location of blinker flasher relay - 2005 Acura NSX

Posted by on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1998 Town & Country flasher signal relay


Hello Mary,

You most likely need a new combination flasher. It's located in the relay box under the dash on the driver's side.

Autozone has them but their cost seems a little pricey for a flasher relay.

26245550-51zfnkfo1ssq5s3hjti3vplp-2-0.gif

Jul 26, 2016 | Chrysler Town and Country Cars & Trucks

1 Answer

04 Monte Carlo blinkers don't work makes hissing sound


Check the flasher, a plug in type relay under the dash.Find it and turn signal on while you are holding it and you will be able to tell which relay or flasher is bad.It may also be located under the hood.

Apr 24, 2013 | Cars & Trucks

1 Answer

The driver rear blinker is very rapid the driver front blinker doesn't blink, the turn signal in the car is very rapid and we have changed the front bulb can you help


you will need to inspect all of the left side blinker bulbs one of the bulbs that is supposed to blink is bad my buddy has a caviler that had the same problem one of the bulbs ended up being bad it was the rear drivers side bulb. there is also a flasher relay locater under the dash that tends to go bad just listen for the ticking and replace the flasher the flasher costs about 8 bucks at you autopart store ask for a flasher relay. i hope this helps.

Aug 25, 2011 | Saturn SC1 Cars & Trucks

1 Answer

My turn blinkers completely stopped working. Not even a ticking noise occurs when i "turn-on" a blinker. I am trying to replace the flasher relay unit to see if this fixes the problem, but my...


Try replacing the turn signal flasher first.It should be above the drivers feet near the steering column and looks like a typical flasher unit. A little round canister with 2 wires,sometimes 3 wires.It is what you hear clicking when using the turn signals.

May 30, 2017 | Nissan Maxima Cars & Trucks

1 Answer

Where is the "flasher" for the blinkers located?


The turn signal flasher is located on the back of the turn signal switch assembly, remove the steering column shroud by removing the 3 screws on the underside, then look on the back of the switch for the relay.

Jan 20, 2011 | 1996 Chrysler Cirrus

1 Answer

YJ Blinker Relay


Hi there,

Both the hazard and the blinker flashers are located on the fuse panel. They pull straight out.

When both turn signals fail, the cause may be a blown fuse, a faulty flasher, a broken turn signal switch or a bad connection.

When you try the turn signals, do they light up and not blink?
-If so, probably the flasher unit.

When you try the turn signals, does nothing happen?
-Check the fuse

Let me know if the problem continues after replacing the flasher.

Mike

Aug 30, 2008 | 1988 Jeep Wrangler

Not finding what you are looking for?
2005 Acura NSX Logo

Related Topics:

48 people viewed this question

Ask a Question

Usually answered in minutes!

Top Acura Experts

yadayada
yadayada

Level 3 Expert

77499 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you an Acura Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...