Question about 1999 Ford F150 Regular Cab

1 Answer

Looking for a wiring diagram for a 99 Ford F-150 pickup. When yo turn the key on to try to start it, all of the gages peg out and the pickup will not turn over. The battery is fine, so now I'm thinking that it has to be something electrical. Any ideas?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 5,626 Answers

My truck does it too. Read a few articles about the problem and most talked about a Recall of the main starter harness. I looked at mine and there was Green corrosion on the Starter loom. I had just enough slack to solder a new end on it.

You may be able to get another wire loom with your Vin#. After I fixed mine, it never broke again. But my dash gauges still peg out and then work. Doesn't seem to bother anything. I put on a Starter relay and yours is the same age as mine. Try jumping the Starter relay to see if it is bad.

Posted on Jul 19, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

99 buick century pcm bcm ignition staring diagram wiring


pcm bcm ignition staring diagram wiring ?????? First off what is staring ????? Do you mean STARTING system wiring diagram ??????? The PCM / BCM have nothing to do with the starting system on your vehicle. When you turn the key to the start position it sends B+ voltage through the transaxle range switch to the S terminal on the starter solenoid ,that's it . Use a test light ,voltmeter etc... With someone turning the key to start check for B+ voltage at the starter S terminal . Plus voltage drop test the heavy gage battery cable to the starter .
Starter Voltage Drop

Oct 05, 2017 | Buick Cars & Trucks

1 Answer

We changed a starter on my 1990 ford f350 pickup but when we try start its like somethings not hooked up right and when i turn on the switch all the gages jump back & forth need to see a diagram of the...


I dont have a diagram, but that recently happened to me on a 02 GMC Envoy. The problem was that 2 of the wires connected to the starter were making contact with eachother. Make sure none of them are touching. Hope this helps. Good luck

Feb 24, 2011 | 1990 Ford F350

1 Answer

Looking for torg specs on tire lug nuts on a 15passenger van f350


Hello there
FORD TRUCK
Wheel Nut Torque Specifications
Make/Model Description Years Torque Make/Model Description Years Torque
FORD (continued)
FORD TRUCK
E250 Van 8 Lug, 9/16" 2008-88 140 -160 ft lbs
E350 Van 8 Lug, 9/16" 2008-88 140 -160 ft lbs
Escape - 2003-01 98
Excursion - 2003-01 160
Excursion - 2000 148
Expedition - 2003-01 150
Expedition 19mm Hex 2000 100
Expedition 21mm Hex 2000 150
Expedition - 1999-97 100
F Super Duty Pickup 10 Lug, 9/16" 2003-99 165
F Super Duty Pickup 10 Lug, 9/16" 1998-96 140
F150 Pickup - 2003-01 150
F150 Pickup 19mm Hex 2000 100
F150 Pickup 21mm Hex 2000 150
F150 Pickup - 1999-88 100
F250, F350 Pickup 8 Lug, 9/16" 2003-01 160
F250, F350 Pickup 8 Lug, 9/16" 2000-99 148
F250, F350 Pickup 8 Lug, 9/16" 1998-88 140
Ranger, Windstar - 2003-87 100

Feb 01, 2011 | 2008 Ford F-350

1 Answer

I need a wiring diagram for the power window switchs on a 1989 Ford F150 pickup My windows will work with the ign. switch is off


Sounds like a faulty ignition switch. Especially if any other accessories stay on as well with key off.

Jan 15, 2011 | 1989 Ford F 150

2 Answers

Firing order for 4.6 97 f150


Several VIN engine there...

1997 Ford F 150 Pickup 4.6 liter CNG SOHC V-8 VIN "9"
and
1997 Ford F 150 Pickup 4.6 liter V-8 VIN "6"
and
1997 Ford F 150 2WD Pickup 4.6 liter SOHC V-8 VIN "W"

e557d23.gif


Hope this help to solve it. (remember comment and rated this).





May 10, 2010 | 1997 Ford F150 Regular Cab

3 Answers

I am looking for a wiring diagram for a F-150 alternator. Do you have one I can download? late 80's and up...


fuel pump an fuel gauge shuts down when i move the wires under the hood can not locate wire color code

Dec 31, 2009 | 1988 Ford F 150

1 Answer

Ford f150 engine won't spin, gages peg out to the right when you try to start it


turn the head lights on. no head lights clean battery cables and charge the battery don't for get to check for water in every cell of the battery. check all ground wires for good connection.

Jul 10, 2009 | 2005 Ford F-150

1 Answer

Cooling fan inop


the cooling fan is a one speed motor. operates only with key on.
The integrated control module (ICM) and the engine computer control the fan.
on at 102 degree C (@ 230 F), off at 99 degrees C (@ 230 F).
You have 3 fusible links, 2 18 gage brown and on 20 gage dark blue providing power to the ICM. You should ahve 12 volts the pink/black wire, the black/orange wire and the yellow wire going into the ICM.

First, jumper 12 volts from the battery directly to the terminal on the motor where the dark blue wire goes. Make sure the black wire is grounded. If the fan works, check the items above.

I can sell you this Ford wiring diagram book for a 91 Mustang for $10 if you are interested.
please rate as solved if this helps you, thanks.

Apr 22, 2009 | 1991 Ford Mustang

1 Answer

Fuel tank


Ok look for a desconected or not installed negative, wire in the work area you was working

Oct 20, 2008 | 1984 Ford F 150

1 Answer

Help


There is no marks. Ford has a two piece special tool for lining up the cams and the crank. One tool slides in the back of the cams and the other is a peg that is put into a hole on the side of the block that allows the crank to turn until it hits the flat on a weight of the crank.Crank peg# 303-574 and the cam tool # 303-465. You can use these to order them from Rotunda or OTC. Good Luck. PS: these tools are used because the cam sprockets are no longer keyed in position. The procedure is not any harder than the other style,but I suggest not trying it without the tools.

Aug 27, 2008 | 1999 Ford Escort

Not finding what you are looking for?
1999 Ford F150 Regular Cab Logo

229 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

77499 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

fordexpert

Level 3 Expert

5626 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...