Question about 2001 Ford F150 Styleside SuperCrew
Sounds like the IAC ( Idle Air Control ) is gummed up. Last I looked they were ~ 70.00 online or they are easy enough to clean with windex.
The IAC is mounted on the back of the throttle body, you will need to remove the plastic throttle body cover to get to it. It is held on with 2 8mm ( think that is the size ) head bolts.
The IAC needs to be cleaned out so the motor can move the plunger back and forth and allow air into the back of the throttle body when the butterfly is closed.
Posted on Jul 20, 2010
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
Jan 02, 2016 | 1999 Honda Accord
Oct 08, 2015 | 2006 Holden Barina
May 26, 2013 | 2000 Nissan Sentra
Jan 07, 2013 | 2005 Land Rover LR3
Jul 01, 2012 | 1991 Chevrolet S-10 Blazer
Engine stalling issue at low speeds
This problem is commonly caused by a dirty automatic idle speed control valve and throttle valve. Buy a can of throttle valve cleaner from NAPA or Carquest (made by CRC chemicals) and spray it into the air intake while the engine is running, use up about 1/2 the can, engine will try to stall hold the speed up, shut it down and let it soak for 30 minutes, restart and blow out the remaining fluid, shut it down and disconnect the negative battery cable for 5 Min's to reset the base idle control
Jun 18, 2012 | 1995 Chevrolet Blazer
Oct 01, 2017 | 1987 Chevrolet Blazer
Jun 09, 2009 | 1995 Buick LeSabre
Jan 10, 2009 | 2003 Chevrolet Tahoe
76 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: