Question about 2001 Ford Taurus

1 Answer

How do i remove transmission lines from radiator?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Ford Master
  • 78,919 Answers

U NEED A SPECAIL TOOL, ANY NAPA AUTO STORE CAN SEE IT TO U, ABOUT $5 THE TOLL IS MADE BY A COMAPNY CALLED "OTC"

Posted on Jul 19, 2010

Ad

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad
oneStan
  • 431 Answers

SOURCE: removing the transmission cooling line fron

These lines just run straight through the radiator to provide cooling. You can bypass the radiator by adding a transmission fluid cooler, during the cold weather in a pinch, a replacement transmission hose with 2 clamps can be connected between the 2 transmission lines to correct leakage, but in warm weather, the fluid suffers if it doesn't get the benefit of a cooler.

Aftermarket coolers are relatively inexpensive, especially compared to the long term benefit of keeping the fluid degrees cooler, prolonging the life of the trans.

good luck

Posted on Feb 22, 2010

kollak81
  • 11 Answers

SOURCE: how do i remove transmission cooling from the

they should unscrew from the radiator try taking a wrench and remove them

Posted on Aug 09, 2009

alicantecoli
  • 22326 Answers

SOURCE: How do I remove the radiator from a 2003 S60?

cant say i have worked on one of these YET but if their is no obvious connection just a compression join then take it off the other end as it could be all one piece with the rad

Posted on Feb 13, 2009

  • 518 Answers

SOURCE: how to change a radiator

You need to get the ford quick disconnect tools needed to disconnect both lines. Should be able to get these tools at any auto parts store.

Posted on Apr 04, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to remove radiator on 2000 Lincoln Continental


RADIATOR
Removal
1. Disconnect battery ground cable.
2. Drain engine cooling system as described.
3. Remove engine air cleaner.
4. Remove upper radiator hose from water bypass tube.
5. Remove radiator overflow hose from radiator and fan shroud.
6. Remove transmission oil cooler line from oil cooler inlet fitting.
7. Remove nuts retaining A/C condenser core to the radiator.
8. Disconnect engine control sensor wiring from the auxiliary electric cooling fan motors and the CCRM.
9. Raise vehicle on hoist.
10. Remove splash shield from lower radiator support and front sub-frame.
11. Remove lower radiator hose from radiator.
12. Remove oil transmission cooler line from oil cooler outlet fitting on radiator.
13. Remove retaining screws for power steering/transaxle oil cooler and position cooler aside.
14. Support fan shroud, radiator and A/C condenser core with a suitable jackstand. Remove lower radiator
support.
15. Position jackstand aside and carefully remove radiator and fan shroud.
16. Remove two retaining bolts for fan shroud at top of radiator and remove fan shroud from radiator.
17. Remove upper radiator hose from radiator.
NOTE: Loosen transmission oil cooler lines while securely holding radiator
connector with a back-up wrench.
NOTE: Loosen transmission oil cooler lines while securely holding radiator
connector with a back-up wrench.
18. Remove the radiator.

Oct 21, 2016 | Lincoln Cars & Trucks

1 Answer

How do I change the radiator on a 96 lincoln contiental 32v intech V8 ?


RADIATOR
Removal
1. Disconnect battery ground cable.
2. Drain engine cooling system as described.
3. Remove engine air cleaner.
4. Remove upper radiator hose from water bypass tube.
5. Remove radiator overflow hose from radiator and fan shroud.
6. Remove transmission oil cooler line from oil cooler inlet fitting.
7. Remove nuts retaining A/C condenser core to the radiator.
8. Disconnect engine control sensor wiring from the auxiliary electric cooling fan motors and the CCRM.
9. Raise vehicle on hoist.
10. Remove splash shield from lower radiator support and front sub-frame.
11. Remove lower radiator hose from radiator.
12. Remove oil transmission cooler line from oil cooler outlet fitting on radiator.
13. Remove retaining screws for power steering/transaxle oil cooler and position cooler aside.
14. Support fan shroud, radiator and A/C condenser core with a suitable jackstand. Remove lower radiator
support.
15. Position jackstand aside and carefully remove radiator and fan shroud.
16. Remove two retaining bolts for fan shroud at top of radiator and remove fan shroud from radiator.
17. Remove upper radiator hose from radiator.
NOTE: Loosen transmission oil cooler lines while securely holding radiator
connector with a back-up wrench.
NOTE: Loosen transmission oil cooler lines while securely holding radiator
connector with a back-up wrench.
18. Remove Radiator

Apr 19, 2015 | 1996 Lincoln Continental

1 Answer

How to remove a radiator form a 2000 jaguar


Removal
  1. Drain the cooling system.
  2. Reclaim the air conditioning refrigerant.
  3. Remove the motor and shroud.
  4. NOTE: Seal the line and the evaporator with plugs.


Detach the air conditioning line. Raise the vehicle.
  • Remove the lower radiator splash shield.
  • NOTE: The splash shield is equipped with hinges which should be treated with care on removal. Remove the radiator splash shield.
    Detach the securing clips.
    Remove the radiator splash shield.
    NOTE: Seal the line and the evaporator with plugs and Detach the air conditioning line.
    1. Detach the lower coolant hose.

    2. Remove the air conditioning condenser. Remove the securing screws.
    3. NOTE: Vehicles with manual transmission, cable tie the cooling radiator
    4. tach the automatic transmission/power steering cooler.
      Remove the securing screws.
      Detach the automatic transmission/power steering cooler.
      1. Lower the vehicle. Remove the radiator foam trim.
      Remove the radiator.

    Sep 25, 2012 | 2000 Jaguar S-Type

    1 Answer

    How do I remove the radiator form my 1997 ford taurus do I have to remove the bumper?


    No,

    Section 03-03: Engine Cooling 1997 Taurus, Sable Workshop Manual
    REMOVAL AND INSTALLATION Radiator Aluminum Core, Crossflow
    SPECIAL SERVICE TOOL(S) REQUIRED Description Tool Number Fuel Line Disconnect Tool Set T90T-9550-S
    Removal
    svh~us~en~file=ani_caut.gif~gen~ref.gif CAUTION: Do not mix Standard (green) Coolant with Extended Life Coolant (orange). If mixing occurs, drain engine cooling system and refill with originally equipped coolant type. If this contamination occurs, the service interval of Extended Life Coolant will be reduced from 6 years/150,000 miles to 3 years/30,000 miles.
    1. Disconnect battery ground cable (14301).
    1. Remove battery (10653) as described in Section 14-01 .
    1. Remove clip retaining contant control relay module and position module aside.
    1. Remove battery tray (10732) as described in Section 14-01 .
    1. Remove radiator cap (8100).
    1. Raise vehicle on hoist as described in Section 00-02 .
    1. Remove radiator splash shield.
    1. Drain engine cooling system as described in this section.
    1. Remove the radiator mounting bracket assembly.
    1. Remove lower radiator hose (8286).
    1. Partially lower vehicle.
    1. Remove upper radiator hose (8260).
    1. Remove radiator overflow hose (8075).
    1. Remove upper A/C condenser core retaining bolts.
    1. Remove upper transmission oil cooler tube clips.
    1. Remove lower transmission oil cooler tube (7C410)(EPN=7C410)using 3/8 Inch Fuel Line Disconnect Tool T90T-9550-C.
    1. Raise vehicle on hoist.
    1. Remove lower transmission oil cooler tube clips.
    1. Remove lower transmission oil cooler tube (7C410)(EPN=7C410)using 3/8 Inch Fuel Line Disconnect Tool T90T-9550-C.
    1. Remove transmission oil cooler bracket and position transmission oil cooler aside.
    1. Remove lower A/C condenser core bolts and position A/C condenser core (19712)aside.
    1. Remove radiator support bracket.
    1. Remove radiator (8005).

    Jan 13, 2011 | 1997 Ford Taurus

    1 Answer

    How to remove and replace radiator on 1998 ford taurus


    1. Disconnect battery ground cable.
    2. Remove the battery.
    3. Remove clip retaining constant control relay module and position module aside.
    4. Remove battery tray.
    5. Remove radiator cap.
    6. Raise vehicle on hoist.
    7. Remove radiator splash shield.
    8. Drain engine cooling system.
    9. Remove radiator mounting bracket assembly.
    10. Remove lower radiator hose.
    11. Partially lower vehicle.
    12. Remove upper radiator hose.
    13. Remove radiator overflow hose.
    14. Remove upper A/C condenser core retaining bolts.
    15. Remove upper A/C transmission oil cooler tube clips.
    16. Remove upper transmission oil cooler tube (7C410) using 3-8 inch fuel line disconnect tool 310-041 (T90T-9550-C).
    17. Raise vehicle on hoist.
    18. Remove lower transmission oil cooler tube clips.
    19. Remove lower transmission oil cooler tube using 3/8 inch fuel line disconnect tool 310-041 (T90T-9550-C).
    20. Remove transmission oil cooler bracket and position transmission oil cooler aside.
    21. Remove lower A/C condenser core bolts and position A/C condenser core (19712) aside.
    22. Remove radiator support bracket.
    23. Remove radiator.

    May 07, 2010 | 1998 Ford Taurus

    1 Answer

    What is the procedure for removal of the radiator from the Mercury Mystique(1998 model)?


    Ford Contour/Mystique/Cougar 1995-1999 Repair Guide

    Radiator -REMOVAL & INSTALLATION
    (see Figures 1 through 7)

    7249321.jpg
    Fig. 1: Remove the upper radiator hose from the radiator


    d2d2436.jpg
    Fig. 2: Use a back-up wrench to remove the transaxle cooler line connections-automatic transaxle only


    3213ac8.jpg
    Fig. 3: the lower transaxle cooler line connection


    ec9272d.jpg
    Fig. 4: Remove the passenger side radiator mount and ...


    956cd3d.jpg
    Fig. 5: ... and the driver's side radiator mount


    f06fec0.jpg
    Fig. 6: The condenser can be support using mechanic's wire as shown here, or another suitable device


    242d821.jpg
    Fig. 7: Carefully lower the radiator out the bottom of the vehicle
    1. Disconnect the negative battery cable.
    2. Drain and recycle the engine coolant.
    3. Remove the upper radiator hose from the radiator.
    4. On 2.5L equipped vehicles, remove the radiator overflow hose from the radiator.
    5. On vehicles equipped with an automatic transaxle only, remove the transmission cooler line from the cooler inlet fitting and plug the line and the fitting.
    6. Remove the engine fan.
    7. Raise and support the vehicle.
    8. Remove the lower radiator hose from the radiator.
    9. On vehicles equipped with an automatic transaxle only, remove the transmission cooler line from the cooler outlet fitting and plug the line and the fitting.
    Remove the cooler lines while holding the radiator connector with a back-up wrench.
    1. Support the radiator, and A/C condenser with a jackstand or other suitable device.
    2. Remove the lower radiator supports from the front of the subframe.
    3. Remove the two retaining bolts for the A/C condenser from the brackets at the bottom of the radiator.
    4. Position the jackstand aside and remove the radiator out the bottom of the vehicle.
    To install:
    1. Carefully raise the radiator into place and support the radiator with a jackstand or other suitable device. Install the two retaining bolts for the A/C condenser into the brackets at the bottom of the radiator.
    2. Install the lower radiator supports and tighten the bolts to 71-97 inch lbs. (8-11 Nm).
    3. Remove the jackstand and install the transmission cooler outlet line (if equipped) and the lower radiator hose to the radiator.
    4. Lower the vehicle.
    5. Install and tighten the fan shroud nuts.
    6. Install the transmission cooler inlet line (if equipped) and the upper radiator hose to the radiator.
    7. On 2.5L equipped vehicles, install the radiator overflow hose from the radiator.
    8. Connect the negative battery cable.
    9. Fill the cooling system with the proper 50 / 50 mixture and start the vehicle.
    10. Bleed the cooling system and check for leaks.

    Hope helps with this (remember rated this help) Good luck.

    Jan 20, 2010 | 1996 Mercury Mystique

    2 Answers

    How to remove a radiator from a ford taurus


    Disconnect battery ground cable. Remove battery. Remove battery tray. Remove clip retaining contant control relay module and position module aside. Remove radiator cap. Raise vehicle front end as high as possible. Remove radiator splash shield. Drain radiator. Remove the radiator mounting bracket assembly. Remove lower radiator hose. Partially lower vehicle. Remove upper radiator hose. Remove radiator overflow hose. Remove upper A/C condenser core retaining bolts. Remove upper transmission oil cooler tube clips. Remove lower transmission oil cooler tube. Raise vehicle. Remove lower transmission oil cooler tube clips. Remove lower transmission oil cooler tube. Remove transmission oil cooler bracket and position transmission oil cooler aside. Remove lower A/C condenser core bolts and position A/C condenser core aside(be careful not to loosen the AC condenser lines. Remove radiator support bracket. Remove radiator out through the bottom of the vehicle.
    Installation
    Position radiator. Position radiator support bracket and tighten nuts. Position A/C condenser core and tighten lower A/C condenser core bolts. Position transmission oil cooler tube and install transmission oil cooler tube bracket. Install lower transmission oil cooler tube. Install lower transmission oil cooler tube clips. Install lower radiator hose. Install radiator mounting bracket assembly. Tighten bolts. Install radiator splash shield. Lower vehicle. Install upper tranmission oil cooler tube. Install upper transmission oil cooler tube clips. Install upper A/C condenser core retaining bolts. Tighten bolts. Install radiator overflow hose and tighten clamps securely. Install upper radiator hose. Position constant control relay module and clip securely. Install battery tray. Install battery. Connect battery ground cable. Fill and bleed cooling system. Start engine and inspect for leaks.

    Nov 25, 2009 | 1998 Ford Taurus

    1 Answer

    How do i change the radiator in a 2002 jaguar x type


    As detailed as I can :
    Drain the cooling system. Detach the air conditioning line .Raise the vehicle. Remove the lower radiator splash shield. The splash shield is equipped with hinges which should be treated with care on removal. Remove the radiator splash shield. Detach the securing clips. Remove the radiator splash shield. Seal the line and the evaporator with plugsDetach the air conditioning line. Detach the lower coolant hose. Remove the air conditioning condenser. Remove the securing screws. Vehicles with manual transmission, cable tie the cooling radiator. Detach the automatic transmission/power steering cooler. Remove the securing screws. Detach the automatic transmission/power steering cooler. Lower the vehicle. Remove the radiator foam trim. Remove the radiator. To install, reverse the removal procedure.

    Aug 11, 2009 | 2002 Jaguar X-Type

    2 Answers

    Transmission fluid dripping out of bottom center of radiator, how do i remove the radiator. 1999 chevy venture


    Before you remove the radiator, check the transmission line connection's at the passenger side. There should be two, one at the top ( in ) and the bottom ( out ). There are only in place by a quick release and see if which line is leaking and replace the line or the O ring that seals the line to the radiator. Good luck and hope this helps. The transmission cooler only runs down the ends of the radiator. Good luck and hope this helps. Keep me posted, be glad to help. 

    Jul 01, 2009 | Chevrolet Venture Cars & Trucks

    1 Answer

    I need 2 know how to remove the radiator


    THIS IS a 1995 LINCOLN CONTINENTAL W/4.6L ENGINE
    iIBELIEVE TOWN CAR IS DIFFERENT LET ME KNOW IF SO AND PLEASE DONT FORGET TO RATE ME


    REMOVAL
    1. Disconnect battery ground cable (14301).
    2. Drain engine coolant.
    3. Remove engine air cleaner (ACL) (9600).
    4. Remove upper radiator hose (8260) from water bypass tube.
    5. Remove radiator overflow hose (8075) from radiator (8005) and fan shroud (8146). NOTE: Loosen transmission oil cooler lines while securely holding radiator connector with a back-up wrench.
    6. Remove transmission oil cooler line from oil cooler inlet fitting.
    7. Remove nuts retaining A/C condenser core to the radiator.
    8. Disconnect engine control sensor wiring (12A581) from the auxiliary electric cooling fan motors and the CCRM.
    9. Raise vehicle on hoist.
    10. Remove splash shield from lower radiator support (16138) and front sub-frame (5C 145).
    11. Remove lower radiator hose (8286) from radiator. NOTE: Loosen transmission oil cooler lines while securely holding radiator connector with a back-up wrench.
    12. Remove oil transmission cooler line from oil cooler outlet fitting on radiator.
    13. Remove retaining screws for power steering/transaxle oil cooler and position cooler aside.
    14. Support fan shroud, radiator and A/C condenser core (19712) with a suitable jackstand. Remove lower radiator support. Position jackstand aside and carefully remove radiator and fan shroud.
    1. Remove two retaining bolts for fan shroud at top of radiator and remove fan shroud from radiator.
    2. Remove upper radiator hose from radiator.
    INSTALLATION
    1. Follow removal procedure in reverse order.
    2. Tighten fan shroud bolts and A/C condenser core nuts to radiator to 3-5 Nm (27-44 inch lbs.) .
    3. Tighten lower radiator support bolts to 8-11 Nm (71-97 inch lbs.) .
    4. Tighten transmission oil cooler lines to fittings to 25-28 Nm (18-21 inch lbs.) .
    5. Tighten power steering/transaxle oil cooler and splash shield retaining screws securely.
    6. Refill engine coolant.

    Feb 11, 2009 | 1995 Lincoln Continental

    Not finding what you are looking for?
    2001 Ford Taurus Logo

    582 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Ford Experts

    yadayada
    yadayada

    Level 3 Expert

    78919 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22326 Answers

    fordexpert

    Level 3 Expert

    5675 Answers

    Are you a Ford Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...