SOURCE: Pressure Control Solenoid "D" Electrical
It means you probably need to at least replace the pressure control Solenoid, then clear the codes, and wait to see if you get another one on the O2 sensor. If you do, replace the O2 sensor.
SOURCE: tranmission solenoid 2005 pontiac vibe
we had the computer code p2716 on our 2005 pontiac vibe -shift solenoid. gm says to replace the pcm before you do anything else. we tried this and it works.
SOURCE: my check engine code is P2716.
the code is for a pressure control sonenoid located in your transmission
SOURCE: 2005 Pontiac Vibe suddenly won't start.
nutral safty switch try moving the shifter from P ... to N....P....N....P.....N
SOURCE: 2005 Pontiac Vibe heater fan working on high only
Nope, you just need the change the heater resistor pack. This is the part that controls the fan speed and it is fairly common that it burns up and only works on high. Usually the resistor pack is located behind the glove box in the cabin of the vehicule, either in the heater motor assembly or somewhere in a vent duct. The second option is the most common, as most companies prefer putting it in the duct instead of in the moto assembly cause it makes it faster to change, and therefore costs them less man hours to change it if it breaks under warranty.
190 views
Usually answered in minutes!
×