Question about GMC Envoy XL

2 Answers

I have a gmc envoy & the trouble codes are p0107,p0130,p0135 & p0171 can you tell me what the problem can be.

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • GMC Master
  • 1,940 Answers

P0107 Manifold Absolute Pressure/Barometric Pressure Circuit Low Input

P0130 02 Sensor Circuit Malfunction (Bank I Sensor 1)

P0135 02 Sensor Heater Circuit Malfunction (Bank 1 Sensor 1)

P0171 System too Lean (Bank 1)

Check your Manifold Absolute Pressure Sensor, and it might be a good time to install a new Upstream O2 Sensor.

It might also be beneficial to have your fuel pressure checked if the engine is really running Lean, but this may be caused by a faulty O2 sensor.


I’m happy to help further over the phone at https://www.6ya.com/expert/jeremy_69f3cc28d95bf514

Posted on Jul 19, 2010

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    New Friend:

    An expert that has 1 follower.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 191 Answers

Hi julio_cam547,this is a Diagnostic Trouble Code Table ,hope can help you.

Posted on May 23, 2014

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2006 gmc envoy,check engine light keeps coming on,the code says it's a vacum leak,my ? is how common is this and where would i start?


What is the code ? No code specifically say's there is a vacuum leak . P0171 - P0174 lean condition ! Could be caused by lack of fuel as well , plugged injectors , fuel filter , low fuel pump pressure etc...
How to Diagnose OBD II Fault Codes P0171 and P0174 Leaking Intake and EGR...

Mar 23, 2017 | GMC Cars & Trucks

2 Answers

Trouble code p0134, p0135 p0053 p0030


P0134 - O2 Sensor Circuit No Activity Detected Sensor 1 Bank 1
P0135 - O2 Sensor Heater Circuit Malfunction Bank 1 Sensor 1
P0053 - O2 Heater Resistance Bank 1 Sensor 1
P0030 - O2 Heater Control Circuit Bank 1 Sensor 1
You need to replace the O2 Sensor Bank 1 Sensor 1
Carquest can help you get the correct part and help you locate it.

Apr 01, 2014 | 2006 GMC Envoy Xl

1 Answer

P0130 P0134


P0130 is the o2 sensor circuit bank1 sensor 1. P0134 is o2 sensor circuit no activety bank1 sensor 1.In other words the o2 sensor on the drivers side before the catalytic converter is bad and needs to be replaced.You will need to reset the computer after its replaced.

Feb 13, 2013 | 2004 GMC Envoy

1 Answer

What is check engine code c107?


do you mean P0107?iagnostic Trouble Code (DTC) P0107 - BARO Sensor Low Voltage Detecte 08.12.2010 · Posted in Automotive Diagnostic Trouble Code (DTC): P0107 - BARO Sensor Low Voltage Detected Description: Sensor operating voltage is less than 5.0 volts (VREF), as a result it failed below the minimum allowable calibrated parameter. Possible Causes: Open in the circuit, or short to ground VREF

Dec 23, 2010 | 2004 GMC Sierra

1 Answer

Codes for 2001 subaru


P0130----- 02 sensor circuit on bank #1 sensor #1
P0171------System too lean bank#1
The oxygen sensor on bank #1 needs a new one. If you have a V6 engine, the 02 sensor is screwed into the exhaust pipe up near the exhaust manifold on the same side #1 spark plug is, that's bank #1
I don't have my manual at the moment, so I can't tell you exactly where it is.
The sensor down by the catalytic converter is sensor #2 you don't want that one.

May 14, 2010 | 2001 Subaru Forester

1 Answer

Manufacturer Specific Code P1171


Change upstreamO2 sensor on bank #1



FixYaWIZ...saailer


I’m happy to help further over the phone at https://www.6ya.com/expert/david_6df67de3b14de867

Dec 10, 2009 | 1997 Saab 900

1 Answer

What does trouble code P0171 for a 2002 Buick Park Avenue mean?


Trouble Code: P0171 (3.8L V6 VIN 1 Auto)
Fuel Trim System Lean (Bank 1) Print this code dataprint_icon_codes.gif Number of Trips to Set Code: 2
OBD II Monitor Type: CCM Details
Indicators: MIL Details
Trouble Code Conditions:
DTC P0101-P0103, P0107, P0108, P0121-P0123, P0130-P0138, P0140, P0141, P0201-P0206, P0300, P0401-P0405, P0410, P0440-P0446, P0506, P0507, P1404 or P1441 not set, engine started, vehicle driven at less than 82 mph at 550-4000 rpm, BARO sensor over 70 kPa (10.1 psi), ECT sensor from 68-230ºF, IAT sensor from 64-158ºF, MAF sensor from 2.8-150 gm/s, MAP sensor from 16-105 kPa (2.6-15.2 psi), fuel level over 10%, and the PCM detected the Long Term fuel trim value was more than +20% for 6 seconds. The PCM controls the air/fuel metering system to good overall fuel economy, driveability, and emission control. During open loop, the PCM determines fuel delivery based on sensor signals, without the oxygen sensor input. During closed loop, the PCM adds oxygen sensor inputs to calculate Short and Long term fuel trim fuel delivery adjustments. Short Term fuel trim values change rapidly in response to changes in the oxygen sensor signals. Long Term fuel trim makes coarse adjustments in order to maintain an air/fuel ratio of 14.7:1.

Possible Causes:
  • Air leaks in intake manifold, exhaust pipes or exhaust manifold
  • Fuel control sensor is out of calibration (ECT, IAT or MAF)
  • Low fuel pressure (fuel filter clogged, pressure regulator failure)
  • One or more injectors restricted or pressure regulator has failed
  • HO2S element is contaminated, deteriorated or has failed
  • Vacuum hose is disconnected, broken, leaking or loose

Troubleshooting:2002 Buick Park Avenue, 3.8L, P0171

Nov 01, 2009 | 2002 Buick Park Avenue

2 Answers

Have p0130 and p0133 codes 98 toyota tacoma


check the mass air flow sensor there maybe dirt on the filiment inside the sensor causing false readings. cleaning or replacing it may make the codes go away.

Oct 28, 2009 | 1998 Toyota Tacoma

2 Answers

A trac off light is on the dashboard


P0130--O2s sensor circuit 1
P0134--O2s circuit insuffient Act sensor 1
P0135--H02s heater performance sensor 1

Jun 03, 2008 | 2002 Chevrolet Cavalier Coupe

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

997 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

Marvin
Marvin

Level 3 Expert

81400 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22359 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...