Question about Pontiac Aztek

1 Answer

How do I do a flush-In-Fill on my 2001 Pontiac Aztek?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,272 Answers

What exactly you want to flush -n- fill.The coolant .or what exactly.If coolant then the procedure is as follows:-- There is a drain plug underneath the radiator It will be on the bottom right if you are facing your vehicle. Then fill from your Radiator.--------------- To locate the petcock (radiator drain) it should be near the bottom of the radiator on the side opposite the lower hose. simply turn the petcock (do not fully remove) the petcock is designed to let the fluid out without having to be completely removed. in order to expedite draining of fluid remove the radiator cap and there should also be small brass "vent" screw, its located near where the upper radiator hose connects to the engine and also within 2 inches of the thermostat. -------
Remove the air cleaner and duct assembly.
Drain the coolant until the coolant level is below the thermostat.
Fill the cooling system. Place the funnel into the neck of the radiator.Mix the Dex-Cool antifreeze with water in equal parts to make a 50/50 mix or use already mixed Dex-Cool.Place the drain bucket under the the open radiator cap. Hold the antifreeze jug to pour so that it sits flat and carefully and slowly pour antifreeze into the funnel in the radiator neck. Pour in until it fills up to the radiator neck and allow it a couple minutes to settle and add more coolant. If the radiator has been drained, it will take most all of the two gallons, if you're just topping off, you'll have to wait and see how much it would take. Thanks. Keep updated for any more query. You can rate this solution and show your appreciation.

Posted on Jul 22, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Ignition doesn't turn in off position


How to replace a ignition cylinder lock on a 2001 Pontiac aztek ...

pontiacforum.com/pontiac/showthread.php?t=22245
Sep 16, 2010 - Pontiac Aztek Forum Discuss topics regarding the Pontiac Aztek. ...You'll now have access to entire lock cylinder, ignition switch etc.

Key stuck in ignition of Aztek- how to remove key ... - YouTube

? 3:11
www.youtube.com/watch?v=_Ie3bFggetY
Jan 3, 2015 - Uploaded by Syrita Vaughn
One day I could not remove my key out of my Pontiac Aztek. After removing the shell of the ignition, I figured out how to release my key. ... It was a toggle switch that was an on/off button. It was just long enough to reach the ...

Oct 21, 2015 | 2001 Pontiac Aztek

1 Answer

Fuse box for 2001 pontiac aztek


On this website (link below) you find fuse box diagram and description for Pontiac Aztek (2001)

Pontiac Aztek 2001 fuse box diagram Auto Genius

Feb 09, 2013 | 2001 Pontiac Aztek

1 Answer

Pontiac aztek fuse box diagram


On this website (link below) you find fuse box diagram and description for Pontiac Aztek (2001)



Pontiac Aztek 2001 fuse box diagram Auto Genius

Feb 09, 2012 | 2001 Pontiac Aztek

1 Answer

Need the firing order on the motor on a 3400 2001 pontiac aztek


For 2001 Pontiac Aztek 3.4 liter V-6 VIN "E" check...

47745d4.gif


Hope help with this (remember comment and rated this).

May 06, 2010 | 2001 Pontiac Aztek

1 Answer

Spark plugs diagram pontiac aztek 2001


For the 2001 Pontiac Aztek 3.4L V6:

Firing Order:
1-2-3-4-5-6

Cylinders:
......(back)......
|..2..|.......|..1..|
|..4..|.......|..3..|
|..6..|.......|..5..|
......(front)

Ignition Coil Connections:
.............(back)...........
..|.5..2.|..|.3..6.|..|.4..1.|
.............(front)

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!

Apr 11, 2010 | 2001 Pontiac Aztek

1 Answer

2001 Pontiac Aztek refrigerant label


Hi 1.68lb of R-134 refrigerant

May 03, 2009 | 2001 Pontiac Aztek

1 Answer

Overheating 2001 pontiac aztek


remove coolant.remove thermostat remove bottom radiator hose to water pump.put a empty container under the radiator.take a water hose put it where thermostat goes flush out the rust in block.watch the water as it come out the water pump .if stream water is small keep flushing until you get a study sream of clear water. also flush out radiator. lower water pressure dont flush radiator it with high water pressure you could burst it. make clean the over flow jug .make sure it not stopped up.put in a new thermostat and radiator pressure cap. fill radiator with half antifreeze and half water.bleed the coolant system.

Apr 05, 2009 | 2001 Pontiac Aztek

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

67 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

78267 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8836 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...