Question about 2006 Saturn Vue

Open Question

How do you remove the front hub assembly on 2006 saturn vue all wheel drive . We have a bad bearing.

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: 2005 SATURN VUE ABS, AWD, R/FRONT BEARING REPLACEMENT

just did one today. removed housing from car, and used a press . be careful of aluminum housing. also used penatrating spray. clean oxidation from inside bearing hole,then lubricating, helped in installation

Posted on Dec 28, 2008

Ad
  • 1114 Answers

SOURCE: 2006 Saturn Vue Wheel Bearing

it should come out once you have disconnected:Brakes,strut,ball joint.tire rod end,cv joint!if it is not put the cv joint nut back on until safe enough to give it a tap with hammer to knock back & out shaft this should come as one piece HUB the bearing is pressed in! better to change whole HUB good luck this hopefully helped you out!

Posted on Jan 31, 2009

  • 73 Answers

SOURCE: front hub is stuck to knuckle.

spray with penetrating oil and let sit. hit with a big hammer. if it still will not come loose remove knuckle and use a press to remove bearing.

Posted on Apr 08, 2009

  • 543 Answers

SOURCE: 1996 saturn sl front wheel bearing assembly

you got to press it in and out,and if u dont do it right with the proper tools you will wreck the hub

Posted on Oct 04, 2009

  • 205 Answers

SOURCE: 2002 saturn vue. replacing front bearings. I

have you un bolted the strut and disconnected the ball joint you have to do this to have room for the shaft to come out

Posted on Oct 15, 2009

Testimonial: "One oclock in the morning, im still working on this POS and he answers my question. Does your mechanic answer the phone at 1 a.m.? Thanks!"

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Have a 2007 saturn vue with a loud humming in the front. how do you tell which wheel bearing it is that is bad.


jack up front of the car and push and pull on wheel if there is play then its the bearings

Jul 14, 2011 | 2006 Saturn Vue

1 Answer

Having trouble removing right front wheel bearing on my 04 vue i tried tapping, chisels, air chisel, penetrating oil nothing seems to work.


The Saturn Vue should have a bolt-on bearing with integrated wheel hub and ABS. It is held on with 3 bolts.

I assume that you got the wheel, rotor, and brake caliper off. You've removed the 3 bolts thru the knuckle to the bearing. And you have the axle nut off and the axle pushed out or at least lose from the bearing spline.

The bearing can get stuck in the aluminum knuckle pilot diameter. The galvanic corrosion between the bearing and knuckle can lock the bearing into the knuckle pretty tightly. It is not a press fit, it's just stuck. I had one GM bearing that had to be pushed out with a hydraulic press.

Keep soaking with penetrating oil and keep hitting it. Otherwise you'll need to remove the knuckle/bearing from the car and find a press.

Feb 27, 2011 | 2004 Saturn VUE

1 Answer

REMOVAL OF FRONT WHEEL BEARINGS


Front (4 Wheel Drive) To Remove:
  1. Raise and support the vehicle
  2. Remove or disconnect the following:
    • Tire and wheel assembly
    • Rotor (See: Disc Brake Rotor)
    • Wheel speed sensor and brake hose mounting bracket bolt from the steering knuckle
    • Electrical connection for the wheel speed sensor
    • Front drive halfshaft assembly (See: Halfshaft)
    • Hub and bearing assembly mounting bolts 4WD front hub 9308kg35.gif

    • Hub and bearing assembly
To Install:
  1. Clean all corrosion or contaminates from the steering knuckle bore and the hub and bearing assembly
  2. Lubricate the steering knuckle bore with wheel bearing grease or the equivalent
  3. Install or connect the following:
    • Hub and bearing assembly
    • Hub and bearing assembly mounting bolts and tighten the hub to knuckle bolts; Torque to: 133 ft. lbs. (180 Nm)
    • Front drive halfshaft assembly (See: Halfshaft)
    • Electrical connection for the wheel speed sensor
    • Wheel speed sensor and brake hose mounting bracket bolt to the steering knuckle and tighten the bolt; Torque to: 106 inch. lbs. (12 Nm)
    • Rotor (See: Disc Brake Rotor
    • Tire and wheel assembly
    Wheel lug nut tightening sequence gm_trk_sub15_wheel_lug_nut_tight_seq.gif

  4. Torque the lug nuts to specification
  5. Test drive the vehicle to confirm the repairs
prev.gif next.gif

Aug 03, 2010 | 2001 Chevrolet Silverado 1500

1 Answer

2002 saturn vue. replacing front bearings. I


have you un bolted the strut and disconnected the ball joint you have to do this to have room for the shaft to come out

Oct 15, 2009 | 2002 Saturn VUE

2 Answers

Loud wining sound in saturn vue


Hub bearings,notorious for these,expensive parts.They go bad on the front and the rear.YOu need to find out which one is the noisey one,maybe more than one.I had a customer that we had to replace all four on within 6 weeks.Hope this helps

May 21, 2009 | 2006 Saturn Vue

1 Answer

I just had my wheel bearings replaced on both right and left sides in the front of my 2002 saturn vue. My vue sounds very loud when I am driving. What is it?


Vues are bad for having all hub bearings make noise,check your rear ones.Or the ones you didn't have replaced.If it's all wheel drive check the propshaft center carrier bearing.Common to fail & make noise.hope this helps

May 05, 2009 | 2004 Saturn VUE

1 Answer

Front hub is stuck to knuckle. trying to replace hub assembly because of bad bearings. can not remove hub assy. how do you get drive shaft out of the way? 2003 saturn vue v6 awd.


spray with penetrating oil and let sit. hit with a big hammer. if it still will not come loose remove knuckle and use a press to remove bearing.

Mar 30, 2009 | 2005 Saturn VUE

1 Answer

2006 Saturn Vue Wheel Bearing


it should come out once you have disconnected:Brakes,strut,ball joint.tire rod end,cv joint!if it is not put the cv joint nut back on until safe enough to give it a tap with hammer to knock back & out shaft this should come as one piece HUB the bearing is pressed in! better to change whole HUB good luck this hopefully helped you out!

Jan 31, 2009 | 2006 Saturn Vue

2 Answers

2006 saturn ion front end noise...wheel bearings?


Yes you can do this; the bearings are sealed unit hubs; very easy the cost is only about $70 each at an auto parts store. once you look at them you'll know how to do this.

Jan 10, 2009 | 2006 Saturn Vue

1 Answer

2005 SATURN VUE ABS, AWD, R/FRONT BEARING REPLACEMENT


just did one today. removed housing from car, and used a press . be careful of aluminum housing. also used penatrating spray. clean oxidation from inside bearing hole,then lubricating, helped in installation

Dec 27, 2008 | 2005 Saturn VUE

Not finding what you are looking for?
2006 Saturn Vue Logo

Related Topics:

357 people viewed this question

Ask a Question

Usually answered in minutes!

Top Saturn Experts

yadayada
yadayada

Level 3 Expert

77499 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8826 Answers

Are you a Saturn Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...