Question about 1998 Subaru Legacy

1 Answer

Can u show graphic for replacing starter motor

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 977 Answers

I can't show graphics but I can tell you how, firstly locate the starter motor, remove the battery lead from the starter motor,plus the small lead from the solenoid then remove the bolts that secure the starter motor,pull the starter motor out, replacing is the reverse.....hope this helps....cheers

Posted on Jul 20, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Intermittently, my car won't attempt to even turnover


most likely its a starter motor showing its first signs of going bad , as it's Russian roulette whether the motor stops on the bad spot in starter motor or not

eventually it will cease to work at all but could go for months that way

especially if its the original starter from 2003 (think how many times its started the car since then)

Nov 30, 2015 | 2003 Toyota Camry

1 Answer

My 2003 Isuzu Rodeo will not start it clicks when I try to crank it.


If it is just clicking then the starter motor is not turning over and you will not be able to start the engine.

You need to check...
1. The starter motor relay. If it has failed you will get no power to the starter motor and you replace it with a new relay. Your owners manual shows you the location of the relay.

2. Check the power supply to the starter solenoid and then from the starter solenoid to the starter motor itself.

3. If these are getting the correct current then you may have either a failed starter motor solenoid or the motor itself. Do not just replace the starter motor and assume that will fix the problem (as some people do) without doing all the essential wiring and current checks. If there is a wiring failure or the starter unit is not receiving the correct power you need to address that issue.

The P0240 code I believe has nothing to do with the starting issue. It relates to the catalytic converters on the exhaust system.
Read about the issue from the link below or look up numerous other references.

http://ricksfreeautorepairadvice.com/p0420-after-catalytic-converter-replacement/

Feb 28, 2015 | 2003 Isuzu Rodeo

1 Answer

Starter relay location on 1999 durango 4x4


Its located in the under hood engine compartment fuse box.

There will be three same relays.One for fuel pump and other for horn and bit bigger one for starter controlling.

For more help regarding starter

CAR STARTER REMOVAL? TESTING


One Wire From Starter Motor Goes To Solenoid And Other Goes To BATTERY. Starter GETS 12 VOLT SUPPLY FROM BATTERY AND WITH THESE VOLTAGE IT TURNS THE MOTOR AND THIS TRIGGERS THE STARTER SOLENOID AND YOUR VEHICLE RUNS.============

For your help there are few relatively help links showing how to remove and install starter with proper instructions:-----

These help links will help.

Click the link below:-----


How to test starter solenoid?

http://schematicsdiagram.blogspot.com/2011/06/how-to-test-starter-solenoid.html

--------------------

How to test cars starter?

http://schematicsdiagram.blogspot.com/2011/06/how-to-test-cars-starter.html

-----------

How to replace starter in car?

http://schematicsdiagram.blogspot.com/2011/06/how-to-replace-starter-in-car.html

-----------

How to replace Starter on Infiniti Q45?

http://schematicsdiagram.blogspot.com/2011/12/how-to-replace-starter-on-infiniti-q45.html

----------

2006 GM Montana: How to replace Starter Solenoid?

http://repairhelpcenter.blogspot.in/2012/06/2006-gm-montana-how-to-replace-starter.html

-----

Saturn SL2: How to replace Starter Motor?

http://howtobyme.blogspot.in/2012/06/saturn-sl2-how-to-replace-starter-motor.html

--------

Saturn SL2 Starter Wiring Diagram?

http://schematicsdiagram.blogspot.in/2012/06/saturn-sl2-starter-wiring-diagram.html

----------

Oldsmobile starter solenoid replacement procedure?...

--------------------

How to replace Oldsmobile starter moor?

----------

Oldsmobile starter motor testing?

-------------

Oldsmobile STARTER MOTOR NOISE DIAGNOSIS?

------------

These details will help.

Thanks.

Nov 28, 2012 | 1999 Dodge Durango

1 Answer

Cant remove my starter from 1997 fordareostar


CAR STARTER REMOVAL? TESTING


One Wire From Starter Motor Goes To Solenoid And Other Goes To BATTERY. Starter GETS 12 VOLT SUPPLY FROM BATTERY AND WITH THESE VOLTAGE IT TURNS THE MOTOR AND THIS TRIGGERS THE STARTER SOLENOID AND YOUR VEHICLE RUNS.============

For your help there are few relatively help links showing how to remove and install starter with proper instructions:-----

These help links will help.

Click the link below:-----


How to test starter solenoid? http://schematicsdiagram.blogspot.com/2011/06/how-to-test-starter-solenoid.html -------------------- How to test cars starter? http://schematicsdiagram.blogspot.com/2011/06/how-to-test-cars-starter.html ----------- How to replace starter in car?

http://schematicsdiagram.blogspot.com/2011/06/how-to-replace-starter-in-car.html

-----------
How to replace Starter on Infiniti Q45? http://schematicsdiagram.blogspot.com/2011/12/how-to-replace-starter-on-infiniti-q45.html

----------
2006 GM Montana: How to replace Starter Solenoid?

http://repairhelpcenter.blogspot.in/2012/06/2006-gm-montana-how-to-replace-starter.html

-----
Saturn SL2: How to replace Starter Motor?

http://howtobyme.blogspot.in/2012/06/saturn-sl2-how-to-replace-starter-motor.html

--------

Saturn SL2 Starter Wiring Diagram?

http://schematicsdiagram.blogspot.in/2012/06/saturn-sl2-starter-wiring-diagram.html

----------

Oldsmobile starter solenoid replacement procedure?...

--------------------

How to replace Oldsmobile starter moor?

----------

Oldsmobile starter motor testing?

-------------

Oldsmobile STARTER MOTOR NOISE DIAGNOSIS?

------------

These details will help.

Thanks.

Nov 26, 2012 | Cars & Trucks

1 Answer

How 2 wire a stater on a 2000 chevy cavalier


One Wire From Starter Motor Goes To Solenoid And Other Goes To BATTERY. Starter GETS 12 VOLT SUPPLY FROM BATTERY AND WITH THESE VOLTAGE IT TURNS THE MOTOR AND THIS TRIGGERS THE STARTER SOLENOID AND YOUR VEHICLE RUNS.============
For your help there are few relatively help links showing how to remove and install starter with proper instructions:-----
These help links will help.
Click the link below:-----

How to test starter solenoid? http://schematicsdiagram.blogspot.com/2011/06/how-to-test-starter-solenoid.html -------------------- How to test cars starter? http://schematicsdiagram.blogspot.com/2011/06/how-to-test-cars-starter.html----------- How to replace starter in car? http://schematicsdiagram.blogspot.com/2011/06/how-to-replace-starter-in-car.html
-----------How to replace Starter on Infiniti Q45? http://schematicsdiagram.blogspot.com/2011/12/how-to-replace-starter-on-infiniti-q45.html
---------- 2006 GM Montana: How to replace Starter Solenoid? http://repairhelpcenter.blogspot.in/2012/06/2006-gm-montana-how-to-replace-starter.html
-----Saturn SL2: How to replace Starter Motor?

http://howtobyme.blogspot.in/2012/06/saturn-sl2-how-to-replace-starter-motor.html

--------

Saturn SL2 Starter Wiring Diagram?
http://schematicsdiagram.blogspot.in/2012/06/saturn-sl2-starter-wiring-diagram.html
----------

Oldsmobile starter solenoid replacement procedure?...

--------------------

How to replace Oldsmobile starter moor?

----------

Oldsmobile starter motor testing?

-------------
Oldsmobile STARTER MOTOR NOISE DIAGNOSIS?
------------These details will help.Thanks.

Nov 23, 2012 | Cars & Trucks

3 Answers

I AM TRYING TO REPLACE MY STARTER ON A 1997 CHEV LUMINA 3.1 V6. I NEED A DIAGRAM OF THE STARTER


Hello Larry...Here are the steps to take. Detach the ground (black) battery cable. Lift the front of your vehicle with a floor jack, support it with jack stands and chock the rear wheels.
Unfasten the retaining nuts holding the heavy (battery) cable and the thin wire to the back of the starter solenoid (the small cylinder mounted on top of the starter motor) with a wrench. Move the heavy and thin wires out of the way.
Loosen the two mounting bolts holding the starter motor to the engine block with a ratchet, large ratchet extension and socket. Hold the motor assembly with one hand and finish removing the two starter mounting bolts. Make a note of the position of each mounting bolt, since they are of different sizes, and of any shims located between the starter motor, mounting bolts and engine block.
Remove the starter motor from the vehicle

To Install:
Position the new starter motor in place with one hand and install the two mounting bolts finger tight with your free hand, along with any shims installed with the original starter. Failing to replace the shims may cause the starter to grind against the flywheel or engage and fail to start the engine

Tighten the two mounting bolts with the ratchet, extension & socket.
Install the heavy cable and wire in their respective mounting studs at the back of the starter solenoid and install the retaining nuts finger tight. Tighten the nuts with the wrench; (careful not to overtighten)
Lower your vehicle off the jack stands...Attach the ground (black) battery cable.

There you have it, included is a picture of the starter, good luck, i hope this helps.

http://www.autopartswarehouse.com/sku/Replacement/Starter/REPB320102.html?tlc=Engine+%26+Drivetrain

Jul 29, 2011 | 1997 Chevrolet Lumina

2 Answers

How do i change a starter in a 99 camry v6? is the starter on top of the engine? easy to access?


I have a 1999 4 cyl Camry and the starter is on the top side of the driver side of the engine. The car was clicking when turning the key , no starter motor kicks in. The solenoid copper contacts just wear down over time and no longer made a good connection to turn the starter motor.

I was able to replace the copper contacts and plunger on the solenoid for $26 in parts. Parts received in 3 days from Nations Electric online. I have done this repair twice now, once on a 1999 Camry and again on a 1998 Chrysler T&C.

Why replace a good stater motor when all you need is new solenoid contacts? Just make sure you don't remove the cover of the starter motor itself! You will have a time getting it back on. See the video below.

http://nationsautoelectric.com/densoparts.html

Here is a video showing how to do the job:

http://www.youtube.com/watch?v=Fkp2245W0jc

May 17, 2010 | 1999 Toyota Camry

2 Answers

How to take out the starter


Chrysler Caravan/Voyager/Town and Country 1996-1999 Starter - REMOVAL & INSTALLATION(see Figures 7, 8, 9, 10 and 11)

7d28ee2.jpg

Fig. 7: Disengage the solenoid wiring connector, then the battery positive (B+) nut and wire from the starter motor

ac6bf44.jpg

Fig. 8: Remove the 3 starter motor-to-transaxle bellhousing mounting bolts

1d4f6fd.jpg

Fig. 9: Remove the starter motor from the vehicle

d9e9e14.jpg

Fig. 10: After removing the starter motor, examine the teeth of the flywheel for excessive wear or damage. Repair if necessary

b56ba8b.jpg

Fig. 11: If the old starter is going to be re-installed, check the condition of the pinion gear teeth. Replace the starter if the pinion gear shows excessive wear or damage
  1. Disconnect the negative battery cable.
  2. Raise and safely support the front of the vehicle securely on jackstands.
  3. Disengage the solenoid wiring connector from the terminal. This connection may be held in place by a retaining nut, or it could be a push-in connector.
  4. Remove the B+ nut and wire from the starter motor terminal.
  5. Remove the starter motor-to-transaxle bellhousing mounting bolts.
  6. Remove the starter from the vehicle. If equipped, remove the starter motor spacer.
To install:
  1. If equipped, hold the starter motor spacer in position.
  2. Install the starter motor into position on the vehicle.
  3. Install the starter motor-to-transaxle bellhousing mounting bolts. Tighten the mounting bolts to 40 ft. lbs. (54 Nm).
  4. Engage the solenoid wiring connector onto the starter terminal.
  5. Connect the B+ wire and tighten the retaining nut to 90 inch lbs. (10 Nm).
  6. Lower the vehicle.
  7. Connect the negative battery cable.
  8. Verify starter motor operation.

Hope this help (remember comment and rated this).

Apr 20, 2010 | 1996 Dodge Caravan

3 Answers

Replace a serpentine belt correctly


if no sticker under the hood to show the route. go to the auto parts store and ask for a belt diagram. if the don't help, try your local repair shop. best of luck.

Aug 06, 2009 | 1994 Jeep Grand Cherokee

2 Answers

2002 Sebring LXi Convertible Starter Motor Fuse Blown 2x


Starter solenoid. I don't have the page here but in chiltons a page shows the ignition to fuse to relay to starter and if you look closely it's quite basic. I had same problem with constant fuse blow #8. The solenoid over time wears and sometimes sticks. When it sticks, your system can overload thus burn fuse. I bet you never stalled out while driving, but only when you shut off and start somewhere it's a no go. That's because you're system is already engaged. I had to change starter as solenoid part of it all. I see others suffer this same problem so please share this around. Solenoid can stick for a millisecond.

Apr 09, 2009 | 2002 Chrysler Sebring

Not finding what you are looking for?
1998 Subaru Legacy Logo

313 people viewed this question

Ask a Question

Usually answered in minutes!

Top Subaru Experts

yadayada
yadayada

Level 3 Expert

78267 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Brandon Johnson
Brandon Johnson

Level 2 Expert

251 Answers

Are you a Subaru Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...