2005 malibu, factory radio removal and keyless entry disabled'?
I have a 2005 chevy malibu and I would like to replace the radio with one that is compatible with my iphone. I am worried that my remote to unlock my car will no longer work after replacing the radio. Is this true? Will my remote not unlock my car anymore once the factory radio is removed?
An expert who has achieved level 3 by getting 1000 points
An expert that got 10 achievements.
An expert that got 5 achievements.
An expert whose answer got voted for 100 times.
Re: 2005 malibu, factory radio removal and keyless entry...
If you Replace your factory Radio on 05 malibu.
The remote will work With no problem.
But you will loose the option to program some feature.
controled with the Radio. Like Reset the Tire pressure Light.
Oil change reset. The option to program auto lock and unlock
When the vehicle is in park on drive..
Ok.. I hope this help on your question.
Thank you for use fixya...
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US. click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need. Goodluck!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
You may have accidentally broke the controller. They are fragile. The newer cars like yours automatically set the alarm when the doors are locked from keychain remote, or locking manually. New remote, $50-100.
this code is located on a module on inside left rear panel where your
car jack is located you will need a flashlight to look up on the module there will be a sticker on this module with 5 digits this will be the original factory code to lock or unlock your car . inside your owners manual there is a procedure to change the code .
atxhonda is right. Your going to have to replace the stereo and an aft mkt stereo will be the cheapest by far, however you should know that 96-00 Civics keyless entry control unit is inside the factory unit and by replacing it with an aftermarket deck you will lose you factory keyless entry system. If you don't have or use honda factory keyless entry or maybe you have an aft mkt keyless entry installed than I would go with the aft mkt deck.
Key fobs have to be reprogrammed. something has knocked the coding off. Search the web for procedures to program fobs. It usually entails operating ignition a series of power lock sequences and the like. If that does not work you can take it to the dealer and they can recode it using the data from you cars computer, but that is extremely expensive.
If you still have the factory radio, there is a way to split the power wire for the factory radio to the aftermarket radio. All you will need are the power and ground for your aftermarket radio, so the rest of the wires should be untouched on the plug for the factory radio. You can simply re-install the radio within the dash and retain the keyless entry as well as restoring your dome light function. Here's a PDF of some instructions. If you did not keep the radio, I would suggest looking online or ins ome junk yards, because it is needed. www.installdr.com/InstallDocs/Honda/PDF/466013.pdf
There are no wires you can touch to program key fob's , Dealer only ! Need a factory scan tool !
This procedure will erase all keyless entry transmitters from memory.
Install a scan tool.
Turn ON the ignition with the engine OFF.
With the scan tool, select Body.
Select Remote Control Door Lock Receiver (RCDLR).
Select Module Setup.
Select Program Key Fobs.
Select Invalidate All.
Follow the scan tool on screen instructions.