Question about 1999 Honda Accord

Open Question

Engine light is on: Trouble Code: P1381 What does

Engine light is on: Trouble Code: P1381 What does this code indicate?

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
Molson02536
  • 3854 Answers

SOURCE: my check engine light is on and the code that

I believe you need a new distributer. It may be a distributor (and often is), as the sensor is built into it, but first, just have a look at your caps, rotor, connections etc on and to the distributor as well as the timing. If it is the distributor, you could do it yourself! It's not hard, make sure you install it the correct way and connect the spark plug wires in the proper firing order.  Good luck and hope this helps.

Posted on Jun 23, 2009

Ad
468 Chevelle
  • 81 Answers

SOURCE: Service engine code indicates EGR valve.

You could have a restriction in the egr ports. remove the valve. Plug the holes, start engine. 1 hole will be blowing out exhaust, the other will have large vacuum.

Posted on Mar 28, 2009

  • 32 Answers

SOURCE: po452 trouble code changed sensor engine light

you might try unhooking the battiey for 20min both + and - posties cuz that will force the computor to have to resest only if you have addressied the fuel pressure problem which taht would most likly be your filter which isn't all that much

Posted on Sep 21, 2009

  • 1244 Answers

SOURCE: code p1381 camshaft position timing

jus means you need to replace the CPS cause its either cracked or out of range or it fixing to go bad

Posted on Jan 21, 2010

  • 110 Answers

SOURCE: I have a 1998 Honda Accord the service engine soon

p1259 is a problem with the VTEC system. this system is for improved performance at higher rpm's. oil can get sludged up and clog the system, or the VTEC solenoid can just go bad. you can always have someone with a scan tool clear the codes to turn off the light, but until the problem is fixed, it will just keep coming back on

Posted on Feb 19, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My passat has a code p1381 what is mean of code p1381 on my volkswagen passat


By itself... not much is meant
(I'm just saying)

It would be nice to know why you were searching for diagnostic codes... but hey (we're just FREE volunteers).

It is directly translated into
"PC Solenoid Power Circuit - Low Voltage"

Have a nice day!

http://forums.vwvortex.com/showthread.php?1208701

http://www.ask.com/web?q=p1831+code+vw&qsrc=0&o=0&l=dir%24nextPageParams&qo=homepageSearchBox

Carnac the Magnificent

Jun 09, 2016 | Volkswagen Cars & Trucks

Tip

How To Check & Reset Your 2002-2006 Nissan Altima Service Engine Soon (SES)...


The following directions will help you decode your 2002-2006 Nissan Altima's Service Engine Soon (SES) light and reset it.<br /> <br /> <span style="font-weight: bold;">Obtain The Trouble Code</span><br /> <ol> <li>Turn the ignition key to the ON position and wait three seconds.</li> <li>Put the accelerator pedal to the floor and release it five times in less than five seconds.</li> <li>Wait exactly seven seconds. Put the accelerator pedal to the floor for ten seconds until the SES light flashes.</li> <li>Release the accelerator pedal and start counting flashes to obtain the four-digit trouble code.<br /></li></ol> <ul> <li>Long flashes (0.6 seconds) indicate the first digit of the code; count the blinks one through nine and write down the first digit. (Ten blinks indicates a zero.) </li> <li> The next three digits blink faster (0.3 second) and have a 1 second pause between digits.</li> <li>The ECM code repeats until you turn the ignition key to the OFF position.</li> <li>You can look up the trouble codes in the Service Manual.</li> <li>If you get four blinks of ten, or 0000, the ECM indicates no malfunction.<br /></li></ul> <br style="font-weight: bold;" /><span style="font-weight: bold;">Clear The Trouble Code</span><br /> <ol> <li> Clear the code and the SES light by holding the accelerator pedal down to the floor for 10 seconds or more while the SES light is blinking.</li> <li>When the pedal is released, the ECM will erase the trouble code(s).</li></ol>

on Feb 15, 2011 | 2002 Nissan Altima

1 Answer

My check engine light keeps coming on code pops up P1381 i changed distributer what else can i do?


If it is a Honda (you do not indicate what vehicle you have) you will get that code with an aftermarket distributor. Replace with a genuine Honda distributor if you have a Honda and you will no longer get that fault code once it has been cleared.

Apr 07, 2016 | Cars & Trucks

1 Answer

Where is the obd2 connector location on holden ra rodeo v6


isuzimpuls.gif
Connect white (test lead) and black (ground lead) wires that are branched from harness approximately eight inches from ECM. After leads are grounded, the "Check Engine" light will flash the diagnostic trouble codes. The DTC's are indicated by the flashing CEL.
FLASH, FLASH, pause, FLASH, FLASH, FLASH = Code 23.
If only one diagnostic trouble code is stored, the DTC will repeat continuously until test leads are disconnected. If more than one diagnostic trouble code is stored, each DTC will repeat three times, starting with the lowest, then proceed to the next DTC. After all DTC's have been displayed, the pattern will repeat.I-MARK 84-85
Connect male and female test leads taped into wire harness near ECM. After leads are connected, the "Check Engine" lamp will flash the trouble codes. The DTC's are indicated by the flashing CEL.
FLASH, FLASH, pause, FLASH, FLASH, FLASH = Code 23.
If only one diagnostic trouble code is stored, the DTC will repeat continuously until test leads are disconnected. If more than one diagnostic trouble code is stored, each DTC will repeat three times, starting with the lowest, then proceed to the next DTC. After all DTC's have been displayed, the pattern will repeat.
86-87 Impulse located near the ECM connector, is used to actuate the Engine Control Module (ECM) trouble code memory within the module. Two terminals (A and C) of this connector are used to activate the diagnostic trouble code system in the ECM. With the ignition switch turned On, engine Off, connect a jumper wire between terminals A and C. The "Check Engine" lamp will begin by flashing a DTC 12. DTC 12 = flash, pause, flash, flash. There will be a longer pause and a code 12 will repeat two more times. This code indicates the self-diagnostic system is operating. The cycle will then repeat until the engine is started or the ignition is switched Off. In most cases, DTC's will be checked with the engine running since no DTC's other than DTC 12 or 51 will be present without the engine running. Remove jumper wire from ALDL connector before starting engine. Reconnect jumper wire after engine is running.

Throttle Body Fuel Injection

The ECM test connection is located under the center console.
A built-in, self diagnostic system will identify problems in the throttle body fuel injection system. When a problem is detected, the diagnostic system will illuminate the "Check Engine" light.
When the engine is started, the Check Engine light should turn off.. If the light remains lit, the self diagnostic has detected a problem. To determine where the problem exists, ground the "Test" terminal of the connector with the ignition On, engine Off and watch the check engine light. Each DTC will flash three times (lowest to highest).

Aug 21, 2014 | Holden Rodeo Cars & Trucks

2 Answers

My malfunction indicator light of my Toyota camry 2000 is blinking and the car cannot accelerate well. my mechanic seems not to understand the problem. what ca I do?


When you said "...indicator light blinking," I assume you mean "check engine" light is on. Procure a check engine code reader and download the trouble code. When you isolate which component the trouble code is talking about, ascertain its not a faulty sensor. Read the code reader instruction and look up "clear trouble code" to turn off the "check engine" light. Replace the sensor first and see if it stops sending the trouble code. If the sensor is still sending a trouble code (check engine lights up again), then replace the component which the sensor is monitoring.
e8d51a8c-e69c-46a9-a698-59a9bf1939a6.jpg

Nov 29, 2013 | 2007 Volkswagen Jetta 2.5 Sedan

1 Answer

Code p1381


Error Code P1381: Cylinder Position Sensor Intermittent Interruption.
Fault:
- Cylinder Position Sensor defective.
- Wiring, loose connections, dirty connector.
- ECM

Jul 12, 2013 | Honda Cars & Trucks

1 Answer

1999 ford contour p1381 error code


P1381 Camshaft Position Timing Over Advanced (Bank 1)
Take vehicle back to the garage as it sounds like the sensor is loose or not plugged in.After paying all this money for the work to be done they should have it put right for free straight away and they should give you a cortesia car with a free tank of fuel while they put yours right

May 18, 2013 | 1999 Ford Contour

1 Answer

COMO REPARAR EL CODIGO P1381 EN HONDA ACCORD 1999


For OBD code problems check the list of help links below. Click the link below to go through its procedure.

--------------
Diagnostic Code P2195? http://schematicsdiagram.blogspot.in/2012/02/diagnostic-code-p2195-on-toyota-avalon.html

--------------
Diagnostic code P1330? http://technoanswers.blogspot.in/2012/02/diagnostic-code-p1330-on-kia-2wd.html

------------
Diagnostic code P0700, P1330, P1121? http://technoanswers.blogspot.in/2012/02/diagnostic-code-p0700-p1330-p1121-on.html

-------------
shows error code P1330? http://technoanswers.blogspot.in/2012/02/2003-kia-sorento-shows-error-code-p1330.html

--------
OBD code P1330? http://technoanswers.blogspot.in/2012/02/obd-code-p1330-on-2003-kia-sorento.html

------------
OBD code P01300? http://technoanswers.blogspot.in/2012/02/obd-code-p01300-on-toyota-rav4.html

--------------
OBD code P0768? http://repairhelpcenter.blogspot.com/2012/01/obd-code-p0768.html

------------
Evaporative Emissions System codes details? http://schematicsdiagram.blogspot.com/2011/11/evaporative-emissions-system-codes.html --------------- Engine Misfire codes?

http://schematicsdiagram.blogspot.com/2011/12/engine-misfire-codes-on-chevrolet.html

----------------


Misfire on cylinder 4?

http://schematicsdiagram.blogspot.com/2011/12/misfire-on-cylinder-4.html

--------------
ABS trouble codes for all models?

http://repairhelpcenter.blogspot.com/2011/11/abs-trouble-codes-for-all-1994-00-acura.html

------------
Diagnostic code P0010? http://schematicsdiagram.blogspot.com/2011/12/diagnostic-code-p0010.html

-------------
Diagnostic Code P1396?

http://howtobyme.blogspot.com/2011/11/diagnostic-code-p1396.html

--------------
Code P0452?

http://howtobyme.blogspot.com/2011/11/code-p0452.html

-------------


OBD code P0172 on Buick?

http://howtobyme.blogspot.com/2011/11/obd-code-p0172-on-buick-park-avenue.html

-------------
DTC Code P0321?

http://howtobyme.blogspot.com/2011/11/dtc-code-p0321-on-buick-park-avenue.html

------------------


Error Code P0471?

http://howtobyme.blogspot.com/2011/11/error-code-p0471-on-2007-dodge-ram-3500.html

-------------
P0304 Error code?

http://howtobyme.blogspot.com/2011/11/p0304-error-code-on-dodge-neon.html

-----------------


OBDII scan is receiving NO BUS CODE?

http://howtobyme.blogspot.com/2011/11/obdii-scan-is-receiving-no-bus-code.html

-----------
How to Clear OBD error Codes?

http://repairhelpcenter.blogspot.com/2011/11/how-to-clear-obd-error-codes-on-acura.html

----------------
Diagnosis and Testing Car Components?

http://vwrepairhelp.blogspot.com/2011/11/diagnosis-and-testing-car-components.html

--------------
Diagnostic Trouble Codes list?

Part 1.

http://repairhelpcenter.blogspot.com/2011/11/diagnostic-trouble-codes-list-for-acura_18.html

--------------
Diagnostic Trouble Codes list?

Part 2.------

http://repairhelpcenter.blogspot.com/2011/11/diagnostic-trouble-codes-list-for-acura.html

------------
OBD Code is cleared but check engine light will not RESET?

http://schematicsdiagram.blogspot.in/2012/02/obd-code-is-cleared-but-check-engine.html

--------------
Diagnostic Code 43 and 71?

http://schematicsdiagram.blogspot.com/2011/12/diagnostic-code-43-and-71-on-1991.html

------------------
Code P0132?

http://schematicsdiagram.blogspot.com/2011/12/code-p0132-on-acura-tl.html

-------------
P0031 code?

http://schematicsdiagram.blogspot.com/2011/12/p0031-code-on-dodge-dakota.html

--------------
How to get diagnostic Code without OBD Scanner on Pre 1995 cars?

http://schematicsdiagram.blogspot.com/2011/12/how-to-get-diagnostic-code-without-obd.html

------------
OBD-II Trouble Code P0300?

http://schematicsdiagram.blogspot.com/2011/12/obd-ii-trouble-code-p0300.html

-------------
Getting diagnostic code P0016?

http://schematicsdiagram.blogspot.com/2011/12/getting-diagnostic-code-p0016.html

--------------
How to Read Codes from Check Engine Light?

http://schematicsdiagram.blogspot.com/2011/12/how-to-read-codes-from-check-engine.html

-------------
Diagnostic Code P0540 continues to return and the MIL light is on?

http://schematicsdiagram.blogspot.com/2011/12/diagnostic-code-p0540-continue-to.html

-----------
DTC Trouble Code P0401?

http://schematicsdiagram.blogspot.com/2012/01/dtc-trouble-code-p0401.html

-----------------
Car misfires and error code P0306 and P0303 is shown?

http://technoanswers.blogspot.com/2012/01/car-misfires-and-error-code-p0306-and.html

-------------
Diagnostic code P0463?

http://technoanswers.blogspot.com/2012/01/diagnostic-code-p0463-on-ford-f250.html

-------------
Check engine light with codes P2195 and P2197?

http://howtobyme.blogspot.in/2012/01/check-engine-light-with-codes-p2195-and.html

------------
Diagnostic error code P0121,P0505,P1000,P2101,P2104, P2110,P2135,P2106?

http://technoanswers.blogspot.in/2012/01/diagnostic-error-code.html

--------------
P0174, P0037 and P2197?

http://technoanswers.blogspot.in/2012/02/p0174-p0037-and-p2197-on-toyota-rav4.html

-----------
P0352 Obd code?

http://technoanswers.blogspot.in/2012/02/p0352-obd-code-on-toyota-rav4.html

-------------
Error code p0402?

http://technoanswers.blogspot.in/2012/02/error-code-p0402-on-ford-escape.html

---------
Obd Code P0763?

http://technoanswers.blogspot.in/2012/02/obd-code-p0763-on-lexus.html

-------
OBD code P0301, P0430 and P0174?

http://schematicsdiagram.blogspot.in/2012/02/obd-code-p0301p0430-and-p0174.html

---------
OBD code P0500?

http://schematicsdiagram.blogspot.in/2012/02/obd-code-p0500-on-lexus-rx-300.html

-----------

This will help.

Thanks.

Mar 05, 2012 | Honda Accord Cars & Trucks

1 Answer

My 94 lexus es 300 the engine light stays on n sometimes my battery light comes on wat does tat mean


Hi, the engine light is indicating that the computer has detected a fault. You will have to extract the trouble code to determine the fault. Go here for instructions on diagnostics: http://www.clublexus.com/forums/es300-and-es330/324049-obd1-check-engine-light-codes.html
Please get back to me with the results/trouble code for assistance in resolving the fault.

The battery light may be indicating a weak alternator. Check the voltage at the battery with the engine idling. If the voltage is less than 14 volts, replace the alternator.

Mar 16, 2011 | Lexus ES Cars & Trucks

Not finding what you are looking for?
1999 Honda Accord Logo

Related Topics:

662 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

77514 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...