Question about 1988 Dodge Daytona

1 Answer

What are the compute codes 24 and 34 on a 1988 Dodge Daytona

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that gotĀ 5 achievements.

    Vice President:

    An expert whose answer gotĀ voted for 100 times.

    Champion:

    An expert who has answered 200 questions.

  • Contributor
  • 245 Answers

Hello
Welcome
Code 24 is Throttle Position Sensor,

This is locared on the right side of the throtle body accross from the throtle linkage there is 2 torx screws holding in place and one wire end to disconect install reverse from instructions

code 34 Speed Control Servo Circuit. No check engine light will post.
Your cruse control servo is not turning on and off like it should.
I would do the tps first then disconect the batery for 5 minn then re check the car for codes, the tps might be messing with the speed control servo.
Let me know if i can help more!

Posted on Jul 19, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Have a 1990 dodge daytona with a 3.0. Check engine light comes on and won't shift out of first gear. Need list of computer fault codes.


Hi

Please check the bellow link to have a detailed knowledge related to your problem….

http://ezinearticles.com/?Help!-My-Check-Engine-Light-Has-Come-On&id=2248878


Let us know if you have something more to know else accept the suggestion.
Thank You for contacting Fixya.com

Jul 28, 2010 | 1990 Dodge Daytona

1 Answer

Looking for 12 33 what the default code is for 1988 daytona


12= battery power was disconnected,
33= air conditioner clutch relay circuit

Jan 29, 2010 | 1988 Dodge Daytona

1 Answer

1989 dodge datona 2.2 turbo coge 13


hello i got a 1990 dodge daytona shelby the code 13 is MAP sensor signal to the computer (ECU) not changing so the map sensor is should be on the firewall with a vacuum line on it little black box looking thing well make sure it plug in and good and that it dose not have a leaking vacuum line if that dose not work you have a bad map sensor thay run about 30 to 100 at auto zone o onec you think you fix it remove the battery term for about 5 mins with the key on and trun the key off before conttecting the battey back up drive for about 20 mins to see if the code show up if you get code 55 all that means is end of falt code list you mite get a code 12 meaning The battery has been disconnected and the computer (ECU) has been reset hope that help keep that daytona runing it a good car

Oct 07, 2009 | 1989 Dodge Daytona

1 Answer

I have a Dodge Daytona (1990) that is showing a check engine light code of 26. Could you tell me what that means?


using the key on key off method of accessing stored codes,26 refers to a high resistance at fuel injector #1,2,or3.i.e. 1 or more injectors need replacement.

Sep 28, 2009 | 1986 Dodge Daytona

1 Answer

1988 Daytona turbo sputtered and died while driving, wont start


try reseting your computer by removing the positive cable for 45 secs then connect cable, if this does not work call a parts store they should tell you

Feb 24, 2009 | 1988 Dodge Daytona

1 Answer

1991 dodge daytona wont start


sounds like low fuel pressure have it ckecked

Feb 09, 2009 | 1991 Dodge Daytona

1 Answer

Trouble codes for 1993 Dodge Daytona with 3.0 liter


CODE 12
Trouble Code 12 is a special case code that is not logged into the ECM's Non-Volatile Memory (NVM) when detected. When the ignition is "ON" and the ECM detects no ignition reference pulses coming from the ignition module, it illuminates the Service Engine Soon lamp.
CODE 22
Trouble Code 22 indicates that the Throttle Position Sensor (TPS) is reading abnormally low. TPS volts should be close to 0.42 V at closed throttle and rise smoothly in about 0.02 volt increments to a maximum reading of about 4.85 volts at WOT
CODE 35
Trouble Code 35 is not used in the Turbo cars. If this code appears while a computer is connected to the ALDL connector, it is probably the result of a bad cable connection at the PC or the ALDL connector. Reseat the cable connections.

Aug 24, 2008 | 1993 Dodge Daytona

1 Answer

1988 dodge daytona


hello i got a 1990 dodge daytona shelby the falt code 34 is 1987 and later models: cruise control servo failure well for your radio there is lose wirng harness make sure there all plug in all the way on the back of your radio you may have a lose fuse in the fuse box

Aug 05, 2008 | 1988 Dodge Daytona

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

143 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

Marvin
Marvin

Level 3 Expert

81400 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...