Question about 1999 Plymouth Voyager

1 Answer

The A/C blower just stopped when I hit a bump in the road. I checked all the fuses and relays and all were good. Help

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Plymouth Master
  • 6,927 Answers

It is likely the blower motor is bad,turn the key on,and the blower on high,bump the blower motor with your hand,if it starts working,replace the blower motor,if it does not,then look at the back of the fan switch to see if the connector is burned,if so,replace the switch and the connector,If this is at all helpful,please rate,thank you.

Posted on Jul 19, 2010


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

2001 volvo cross county turn on switch for blower dosent work but if you hit abig bump in the road it goes on

Sounds like you may have a bad connector behind the switch or the actual switch is bad. Also check your fuses, relay and wiring

Nov 26, 2016 | Volvo Cars & Trucks

5 Answers

Intermittent Lights, Speedo, and Fan Problems

Check connectors and wiring, probably vibrations are interrupring some bad connector.

Aug 14, 2008 | 1995 Volvo 850

1 Answer

Air or heat won't come on unless you hit a bump in the road what part do i need to get?

see the diagram:
you must test wires loose, broke or burn, switch , fuse, connector, or blower motor, block resistor test or replace.

Jun 22, 2012 | 2002 Buick LeSabre

1 Answer

I was off roading in my '92 jeep wrangler 2.3ltr and hit some big bumps. The engine shut off and now it won't start. I changed the coil but still no spark. What could be my problem?

I would start by checking all the fuses and relays under the hood , you can have one or more fuse or relay disconected or loose from the big bump
also go threw chack all electral conections, one or more might have come loose
it would be a good idea to go threw all fuses and conections unplug and plug back in.
Let me know if we need to dig deeper into it but i think you will find a loose conection

Jul 13, 2010 | 1992 Jeep Wrangler

2 Answers

Blower motor 2000 kia sephia works and stops when it wants

The problem might be in the fuse box. I had this similar problem on my highbeams. My soluion was to wiggle the fuse box and or wires going to the motor. Its basically a short.

Jun 22, 2009 | 2001 Kia Spectra

1 Answer

Blower fan goes off with hitting a bump

Check to see if any of the wire connections are loose.


Mar 14, 2009 | 2004 Pontiac Grand Prix

1 Answer

Heater problem blower not blowing ?

Hi Steve, you're so close to the answer already.
The feed wire is broken and sometimes it touches and sometimes not. It might just be the fitting on the end if you're lucky.
I'd replace the whole wire just to be sure ;)

Apr 16, 2017 | 1994 Volvo 940

Not finding what you are looking for?
1999 Plymouth Voyager Logo

186 people viewed this question

Ask a Question

Usually answered in minutes!

Top Plymouth Experts


Level 3 Expert

81423 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22359 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8841 Answers

Are you a Plymouth Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides