Question about 2002 Chrysler Sebring

2 Answers

Location of oil switch 2002 chrysler 2.7 engine

Location of oil pressure switch 2002 chrysler 2.7 engine

Posted by on

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 55 Answers

Should be on driver's side right above the oil filter

Posted on Jul 18, 2010

  • John Dec 09, 2011

    It is underneath a heat shield about center of engine on the firewall side. Easy enough to get to. You must remove the shield. There are 3 or 4 bolts thatv takes a 10 mm wrench to remove. I hope this will help.

×

Ad
  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

I meant to say the Oil pressure sending unit is under the car about center of the engine, above the oil filter. It has a heat shield covering it which makes it hard to see. Remove 3 or 4 screw 10mm to remove heat shield and you will see the switch.

Posted on Jan 26, 2012

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is oil pressure sending unit on 1990 chrysler new yorker located


The oil pressure switch and sending unit is located directly above the oil filter and next to the starter motor on the lower side of the engine block.
7_21_2016_5_24_52_pm.jpg

Jul 21, 2016 | Chrysler Cars & Trucks

1 Answer

Where is the oil pressure sensor located on a 2014 Dodge Charger SE


Kelli, on 2.7 motor it is by oil filter above steering rack, in the eng. block, I think some may behind alternator and bracket also.
If these location do not seem to be right, do a online search with your info. and engine size.

Dodge Magnum oil pressure switch oil pressure light
Chrysler 300 2 7L oil pressure sensor location

Mar 20, 2016 | Dodge Cars & Trucks

1 Answer

Where is the crankcase pressure sensor located in a 2004 Pt Cruiser


Chrysler PT Cruiser crankcase pressure Questions ... - Fixya

www.fixya.com > ... > crankcase pressure > Cars & Trucks > Chrysler
Chrysler PT Cruiser cars & trucks crankcase pressure questions and answers. Ask your ... The oil pressure switch/sensor is located on the rear of the engine block above the right axle I believe. Unless you ... Question about 2004 PT Cruiser.

Nov 24, 2015 | Cars & Trucks

2 Answers

Is there a oil safety switch on 2002 Chevy s10 zr2


You have a oil pressure switch which is located by the oil filter,it is screwed into block,just removed electrical connector,get wrench and remove.
  • When the oil pressure is either high or low it will either turn the oil light "on" in the dash or move the gauge to the extremes
  • Undetected high or low oil pressure can result in internal engine damage and/or gasket leakage. Here's a picture of what it look's like.
http://www.autozone.com/external-engine/oil-pressure-switch/duralast-oil-pressure-switch/chevrolet/s10-p-u-2wd/2002/6-cylinders-w-4-3l-sfi/31135_652060_8450

Aug 10, 2015 | Cars & Trucks

2 Answers

Change oil sending unit 04 tahoe


It is located on rear of engine back by the distributor use to be. see attached pic
25576498-orvua4poo00lqzajd5seke1u-5-0.gif

Mar 15, 2015 | 2004 Chevrolet Tahoe

2 Answers

Tying to find crank sensor for 2002 Cadillac Seville std 4.6 liter


This answer covers 1999-2005 Cadillac Deville, Eldorado & Seville.
Example Engine:
2002 Cadillac Seville STS 4.6L SFI DOHC HO 8cyl.

This engine has (2) Crankshaft Position (CKP) Sensors: the Upper sensor is CKP sensor B, and the lower sensor is CKP sensor A (this is included for the OBD-II DTC codes - P0385 references Sensor B = upper CKP sensor, whereas P0335 references the lower CKP sensor (sensor A)).

Both crankshaft position sensors are located in the front of the engine just above the oil filter adapter. To access both CKP sensors, jack up vehicle on the passenger side, remove the oil filter, and the oil filter adapter, including the Engine Oil Pressure (EOP) switch. See illustration.
tying-find-crank-sensor-2002-cadillac-3hcuyyaerdphtgzyedxwn2k0-1-0.jpg
The ARROW points toward Front of Car.
1. Upper Crankshaft Position Sensor (B).
2. Lower Crankshaft Position Sensor (A)
3. Engine Oil Pressure (EOP) switch
4. Engine Oil Level switch
The Oil Filter is the can-type object below the oil filter adapter, which includes the EOP switch. Recommend: remove oil filter with an oil filter socket/strap wrench, since it's close to the oil pan.

Aug 21, 2014 | Cars & Trucks

1 Answer

Adding to my question about the correct location of the oil pressure switch. The car is a 2002 Hundai Accent GL. I need a PICTURE OR DIAGRAM of the location on the engine to make sure I'm working


location of oil pressure sensor on 02 hyundai accent gl with a 1.6 liter engine is driver side front of engine. lower near the bottom of the radiator.mind you that is for a 1.6 l

Apr 18, 2013 | Hyundai Accent Cars & Trucks

2 Answers

Where is the oil pressure sending unit located on a 1999 chrrsler cirrus


There are three engines that come with this car, there are two engines 2.0 and2.4 with the oil pressure switch located on the right front of the engine block, and then if it has the 2.5 engine then the oil pressure switch is located on the leftside of the engine block above the oil filter, good luck,.

Jan 01, 2011 | 1999 Chrysler 300M

2 Answers

Oil pressure switch location on 1999 chev cavalier


The oil pressure switch relays the oil pressure in the engine to the instrument cluster. The switch will illuminate the OIL PRESSURE light if the oil pressure drops below 2psi (13 pa). The switch is usually located on the side of the engine, under the intake manifold on the 2.2L engine and on the side of the intake camshaft housing on the 2.3L/2.4L engine.


7fef8ab.jpg

Fig. 1: The oil pressure switch is located on the engine block under the intake manifold and is accessible from underneath the vehicle-2.2L engine

bdee34a.jpg

Fig. 2: Oil pressure switch location-2.3L/2.4L engine


Other, the low oil level switch activates the OIL light in the instrument cluster when the oil level in the pan goes below a certain level. The switch is mounted on the oil pan.


Hope this helped (remember rated this post).

Apr 11, 2010 | 1999 Chevrolet Cavalier

1 Answer

2002 Chrysler Sebring Oil pressure light


Could be a bad oil pressure switch, or a bad oil pump. Both will cause this issue. Hope it is the switch b/c the oil pump is a costly repair.

Mar 26, 2009 | 2002 Chrysler Sebring

Not finding what you are looking for?
2002 Chrysler Sebring Logo

2,538 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

77514 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

chargerhp
chargerhp

Level 3 Expert

814 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...