Question about 2000 Oldsmobile Intrigue

1 Answer

How to fill ac an where is the connector - 2000 Oldsmobile Intrigue

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 11 Answers

The low pressure fill port is right at the back of the engine, at the firewall, about dead center. Most do-it-yourself hose attachments will prevent you from attaching to the high pressure side. Make sure you have the right side, there is a possibility that attaching to the wrong side can cause the freon can to burst....

DO NOT ATTEMPT if you are totally new at this...its better to get help, ask someone more experienced to tell you which port is the right one

Posted on Jul 18, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1994 Lincoln Town car ac compressor doesnt engaged


probably out of coolant and wont let itself blow up . have a technician see if you have and R34 in your cooling/AC system can be switched to the newer friendly ac for cheap needs new O-rings for all hoses and connectors, Just ORings, and coolant, new screw on fill ends

Sep 17, 2016 | 1994 Lincoln Town Car

1 Answer

Hello Trying to help elderly neighbor 1999 Cherokee ac does not work filled Freon to what sticker said compressor still not kicking on also no power to wire going to compressor this is an old lady that...


On the line going to the compressor,you will see a little bulb looking thing with a connector with two wires.Pull the connector and jump between the wires. If the compressor starts,pull the jumper and look for an ac fuse.You may also need to put freon in with the compressor running,using the method we just talked about. The shops like kragen or pep boys have a kit with a gauge. Use that so you know how much you need. good luck

Jul 19, 2011 | 1998 Jeep Grand Cherokee

1 Answer

Where do i refill the ac on my 1999 mercury tracer


  1. Turn the car on.
  2. Turn the AC on coldest setting.
  3. Turn the Fan on highest setting.
  4. You want to fill from the low side and watch the gauge. Sometimes a AC system gets so low it has to be vacuum pressurized for a while before a charge will be successful. In that case the gauge will go into the red right away. Something to look out for anyway.
  5. With the R134 the connectors are different sixes so you won't be able to stick the refrigerant adapter on the wrong connector.
  6. See picture for the location of your low side (where you will fill) The high side runs the other direction off your compressor towards the condenser. Remove green cap to fill.

ironfist109_74.jpg


Regards, Tony

May 10, 2011 | 1999 Mercury Tracer

1 Answer

Which port on the ac system line is the one I use to recharge the system? there are 2 ports on top...


the line with the smaller connector on it is your low pressure (fill line) usually the thicker line of the two. A lot of aftermarket parts stores sell freon bottles with little low pressure gauges on them.

Aug 01, 2010 | 2004 GMC Yukon

1 Answer

Hot air blows out wen ac is switched on how do i re fill ac unitif that is the problemb


You can buy the connector with a gauge and insructions to the low side at any store that sells auto parts and 134a refrigerant. The low side valve is located right on the front of the compressor. The low side connector will only connect to the low side port as the high side is a different size.

Jul 10, 2010 | 1995 Ford Windstar

1 Answer

Were is the low pressure port for AC fill located in 2001 ford expedition 8 cyl


Passenger side by fire wall under some elec. connector on accumulator, port point about 45 deg. angel towards engine.

Jun 29, 2010 | 2001 Ford Expedition

1 Answer

Looking for a diagram for the high & low side ac fill hoses


look in engine compartment Against firewall follow two alumninun tubes comming form canister ONLY one with connect to the Refrigerant can connector Connection Not to worry, majority of kit quick connector will only connecto low side quick connect

One can only... do not over fill ... run engine with compressor running A MUST your compressor nees to run as you add refrigerant

Jun 11, 2010 | 1993 Plymouth Voyager

1 Answer

My honda prelude 1992 s the air con doesnt always work! like sometimes ill press it in and the light will come on on the aircon button but mostly it doesnt! the aircon only sometimes comes out cool i think...


need to check the back side of the ac connector where the harness plugs in remove the heater control unit assy and u will see the ac button connector with it still pluged in start the car and turn the ac button on wiggle the ac connector if the light comes on and off it's a loose connection in the harness/connector at the ac button try to jamb a folded over zip tie about 4inches long in between the ac button connector and the plastic frame basicly just make sure that the connector staitionary not wiggling around I had the same problem on my 95 prelude vtec push the ac button sometimes comes on or hitting the dash just got old hope this helps

Sep 30, 2009 | 1992 Honda Prelude

1 Answer

My 96 sls cadillac reads that it is not on


the ac clutch could be bad. also are u reading the air pressure in the system or actual freeon in system. also check the relay that controlls the ac clutch. check fuses. and also disconnect the compressor. and spray electrical cleanner inside connection. some time the diode inside the wiring harness will be bad. a diode lets only positive power pass thrue. it can be found about 6 inches from the connector.

Jul 05, 2009 | 1995 Cadillac Seville

1 Answer

How to change fuel pump in 97 chevy 2500 (cargo


You have to drop the fuel tank. It is inside. Hope the tank is near empty, remove the 2 fuel fill hoses, you have two straps, lower tank, remove 3 wire connectors, and several more lines. Please use an ac delco fuel pump module. It may come updated with a new wiring connector to fix the old ones problem. If it does, you have to rewire the van following the directions.

Mar 27, 2009 | 1997 Chevrolet Cargo Van

Not finding what you are looking for?
2000 Oldsmobile Intrigue Logo

118 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

Marvin
Marvin

Level 3 Expert

83083 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22382 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8841 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...