Question about 2008 Jeep Commander
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Per Chilton Auto repair manual:
Removal & Installation
WARNING Support the brake caliper with mechanics wire. Do not let the caliper hang by the brake hose.
Posted on May 17, 2009
Can you see the cooling fans come on? When the engine gets to 212 degrees the fans should come on. To test the fans, with the engine running turn the A/C on high, the fans should come on .
The system also has a 212 switch that screws into the intake manifold. This is what turns on the fans with no A/C.
I hope this helps you.
Posted on Sep 06, 2009
AC's have no water in the system...the sound you hear is from your heater core and the probable reason you are hearing it is because your coolant system is low on water/coolant. Make sure system is full and that you don't have any leaks anywhere. Hope I helped you!
Posted on Nov 07, 2009
next to the fan motor there should be a connector that has three or four wires that attached to the blower resistor. it should have two screws holding it to heater case, just pull it out and replace.
Posted on Feb 13, 2010
Testimonial: "This info was very helpful but need a little more info of where the fan motor is located. I will post another question to find that info."
I would rate this a 5 in difficulty. If you have a metric socket set, basic hand tools and a supertine belt tool it's fairly easy repair. You can rent a surpentine belt tool at Autozone.
Disconnect the battery
remove the cowling
remove the supertine belt from the altenator pully
disconnect the red wire on the back of the altenator
disconnect the harness plug from the altenator
remove the bolts holding the altenator to the mounting brackets.
Reverse the process with the new altenator and it it's done.
Make sure your battery is charged before you start the engine a low battery can cause damage to your new altenator.
Posted on May 21, 2010
Tips for a great answer:
May 31, 2017 | Jeep Cars & Trucks
Feb 14, 2015 | 2006 Jeep Commander
Oct 02, 2014 | 2006 Jeep Commander
Feb 26, 2018 | 2006 Jeep Commander
Sep 16, 2010 | 2006 Jeep Commander
Mar 13, 2010 | 2006 Jeep Commander
Feb 13, 2010 | Jeep Commander Cars & Trucks
Aug 05, 2009 | 2006 Jeep Commander
Jul 22, 2009 | 2006 Jeep Commander
82 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: