Question about Cars & Trucks

1 Answer

I had to replace the inner axle on my 2001 dodge ram my problem is that i cant get the seal back in was wondering if you could help

Posted by Anonymous on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 10,319 Answers

Seals are mainly installed with a round flat object tapped into place. A hockey puck works great in these cases

Posted on Jul 17, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need a diagram of a 2001 dodge ram 1500 four wheel drive front axle


Search Results
    images for I need a diagram of a 2001 dodge 1500

    Replace front axle seals 1998 Dodge Ram 4X4, part 1 ...

    ? 14:28
    https://www.youtube.com/watch?v=WvRyg95cUIQ
    Nov 1, 2010 - Uploaded by spelunkerd
    If you have gear oil leaking from a front axle tube then this is a ...a circular hole saw (he says about 2-2 1/4"), grinding the teeth down, ... Hey my 2001 ram has a big puddle coming from it'sdriver side wheel could this be it?.

Feb 08, 2016 | Dodge Cars & Trucks

1 Answer

How do I replace my inner axle on the passenger side of my 2002 Dodge Ram 4x4 4.7L. I lent my truck out and the C clip let go of the CV axle. The intermediate axle spline is stripped and I need to change...


Lift and support front end on suitable jack stands preferably on frame. Remove right front cv axle, stub shaft, and seal. You will need to pull the right front brake caliper assembly loose and place to the side. Then remove bolts from shock and upper control arm and hub nut to do this. Next, remove axle lock actuator on passenger side of front axle. Place a drain pan underneath front diff cover and remove cover and drain axle. In the center of differential there will be an 8 mm head bolt holding spider gear cross-shaft. Remove bolt and cross-shaft only! Push inner axle in until clip clears inside of passenger spider gear. Set clip aside and push/pull axle shaft straight out to passenger side.

Feb 09, 2015 | Dodge Cars & Trucks

1 Answer

JUST HAD RIGHT FRONT WHEEL BEARING REPLACED ON MY 1998 DODGE RAM 1500 4X4 DROVE 50 MILES NOW THE AXLE SEAL IS LEAKING WHY


Can't remember if your axle is set up like the ones on a Jeep (too many cars stuck in my head) but if it is, the seal is on the inboard end of the axle and easy to forget it's there. If you don't lift the axle so it goes through the center of the seal when you put it back in, it will push the seal out and cause a leak.
If that's the case, whoever did the work needs to make it right. (carrier needs to be removed as well as the axle, to replace the seal)

May 24, 2011 | 1998 Dodge Ram 1500 4WD

1 Answer

On my 2001 Dodge Ram 1500 5.2 2WD, I just found


This is a very simple job to do. Raise the front of truck off the ground,block the rear tires. Using pliers and a hammer,remove the grease cap from hub. Remove the cotter key and nut from axle,pull out slowly and remove outer bearing. then remove hub from axle. To remove inner bearing ,prop hub on a board and use a large punch to drive out bearing and seal. Clean out inside the hub and install new bearing and seal. Replace all parts in the reverse as you took them off. Hope this will help you.

May 14, 2010 | 2001 Dodge Ram 1500 Truck 2WD

1 Answer

Front end axle loose on 4wd


First slide it into the transmission then back to the rear dif.

May 24, 2009 | 2001 Dodge Ram 1500 Truck 2WD

1 Answer

Axle Seals


book time is a little over 6 hours to do both. if its your first time count on it taking a lot longer

May 18, 2009 | 1998 Dodge Ram 1500 4WD

2 Answers

Clicking noise in front end 2001 dodge ram 4x4


the ansew i found is replacing the seal around the joint and from both end removing it and cleaning it out i had rocks in mine from going threw water and mud ita a all day deal but a twenty doller fix axle shaft oil seal is all i had to replace

Apr 05, 2009 | 1997 Dodge Ram 1500 Club Cab

1 Answer

Replacing front wheel ujoint on 2001 ram dodge 1500


HUB BEARING AND AXLE SHAFT REMOVAL
  1. Raise and support the vehicle.
  2. Remove the wheel and tire assembly.
  3. Remove the brake components from the axle, Refer toBrakes.
  4. Remove the cotter pin and axle hub nut.
  5. Remove the hub to knuckle bolts Hub and Knuckle Remove the hub bearing from the steering knuckle and axle shaft
  6. Remove the brake dust shield.
  7. Remove the axle shaft from the housing. Avoid damaging the axle shaft oil seal.
INSTALLATION
  1. Clean the axle shaft and apply a thin film of Mopar Wheel Bearing Grease to the shaft splines, seal contact surface, hub bore. Install the axle shaft into the housing and differential side gears. Avoid damaging the axle shaft oil seals in the differential.
  2. Install dust shield and hub bearing on knuckle.
  3. Install the hub bearing to knuckle bolts and tighten to 170 N·m (125 ft. lbs.) torque.
  4. Install the axle washer and nut, tighten nut to 237 N·m (175 ft. lbs.) torque. Align nut to next cotter pin hole and install new cotter pin.
  5. Install the brake components, Refer toBrakes.
  6. Install the wheel and tire assembly.
  7. Remove support and lower the vehicle. 8014d67b.gif

Feb 26, 2009 | 1996 Dodge Ram 1500 Club Cab

1 Answer

I think the front axle seals on my 1999 dodge 3500 4x4 need to be replaced. I am replacing the sealed bearing hubs and I wonder how big of a job it would be to switch out the axle seals inside the...


if you have the hubs of than you dont have much futher to go to replace the axl seals. just slide out the axls the passenger side is two pice then take out the four bolts that hold in the carrier gear then pull out the hole gear asemblie the driver side seal is in the differential housing the passenger seal you have to take of the cad unit in the middle of passenger side axle case.tech article with pictures at pavement sucks.com

Jun 28, 2008 | 1999 Dodge Ram 2500 4WD

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

27 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

Marvin
Marvin

Level 3 Expert

81400 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22359 Answers

john h

Level 3 Expert

16546 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...