Question about 2000 Mazda MX-5 Miata

1 Answer

Firing order and which plug coil connect to which plug

Posted by on

  • tomtgator Jul 17, 2010

    yes! thank you

  • tomtgator Jul 17, 2010

    sorry, none of these work. you have 3 different connections and one wire is too short!

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,272 Answers

The firing order for Mazda MX-5 Miata is 1-3-4-2 firing order and which plug  coil connect to - 1673c31.gif

For exact connection for both 1.6 and 1.8 check the connections in the figure below:-- 0650bc9.jpg
Thanks. Keep updated for any more query. You can rate this solution and show your appreciation.

Posted on Jul 17, 2010

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
c17hydro
  • 2984 Answers

SOURCE: VERIFY PLUG TO COIL LOCATION

Here ya go:

968753a.gif

Posted on Aug 28, 2009

  • 462 Answers

SOURCE: need a diagram of the firing order of spark plug wires from coil packs to spark plugs

FROM LEFT TO RIGHT, 5/2 3/6 4/1. ASSUMING YOU HAVE THE 3.1L ENGINE.

Posted on May 31, 2009

bunnydawg
  • 5158 Answers

SOURCE: CHANGED WIRES TO PLUGS WANT VERFIY PROPER LOCATION TO COILS

have a look at the coil pack... it is numbered... now if it's like a 95 windstar the engineers had a sense of humour. it is 1 2 3 down one side then 4 6 5 down the other.... i didn't notice this when i changed my coil pack and couldn't figure out why it was missing.

Robert

Posted on Apr 23, 2009

wrangler582
  • 1 Answer

SOURCE: 1997 Mercury Grand Marquis need firing order and coil terminal lo

1-3-7-2-6-5-4-8

Posted on Mar 18, 2009

c17hydro
  • 2984 Answers

SOURCE: Trying to find the order the coils fire in a triton 3.0 v6

Here ya go!

78aa935.gif

Posted on Aug 28, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Firing order for 1998 toyoto rav4


Plugs from left to right:

1-2-3-4


Coil Connections from front of engine bay to rear firewall of engine bay


3 - Rear coil pack, rear post
2 - Rear coil pack, front post

4 - Front coil pack, rear post
1 - Front coil pack, front post


Firing Order 1-3-4-2

Aug 19, 2016 | 1998 Toyota RAV4

1 Answer

What is the Wire Order with distributor?


theres no distributor and the firing order for your 3.8 is 1-6-5-4-3-2-the following link shows the coil pack
Buick General Motor 3800 V6 Engine Firing Order DIS IDI ignition timing 3.8 Buick Engine Coil Pack Firing Order Spark Plug Wire Location Which way do the spark plug wires go on & what cylinder is what?
.
For the Buick V6 231 3.8 liter turbocharged engine:
.
Answers!
.
Firing order:
1 - 6 - 5 - 4 - 3 - 2.
.
Spark plug wire location on coil pack:
.
Closest to the back of the car, left to right: 1 - 5 - 3.
Closest to the front of the car, left to right: 4 - 2 - 6.
.
Spark plug wire location on engine:
.
drivers side, front to back of car: 1 - 3 - 5.
passenger side, front to back of car: 2 - 4 - 6.
.----and this link shows the coil pack to cylinders
.
3 8 Buick Turbo Engine Coil Pack Firing Order Spark Plug Wire Location

Aug 15, 2015 | 1987 Buick Regal

2 Answers

I am having trouble fiquiring out which wire goes to which plug. The wires are different lengths and the correct wire length has to go specifically with the correct plug. I have the firing order dia


The firing order is 1-2-3-4-5-6
Cyl #1 is front left when looking at engine front to back
left coil pack connects to cyls. 5-2
center coil pack connects to cyls. 3-6
right coil pack connects to cyls. 4-1
It doesn't matter which connector on the coil you use just that the cylinder is connected to the proper coil pack (the coil fires both plugs at the same time, twice per each full 4 stroke cycle)
1998 Chevrolet Lumina
3.1 liter V-6 VIN "M" 94760154.gif

7aedc9b8-0448-4420-b824-420afd929143.gif

Dec 20, 2013 | 1998 Chevrolet Lumina

2 Answers

Need to know spak plug firing order for a 1996 pontiac grand am


4-cylinder:

Firing Order: 1-3-4-2

3.1 liter:

Firing Order: 1-2-3-4-5-6
jturcotte_599.jpg

Sep 04, 2011 | 1996 Pontiac Grand Am

3 Answers

1999 ford escort I changed the plugs, but broke a plug cap. Bought a generic replacement spark plug wire that had to be modified to fit into the head. I cannot get the firing order correct. The car...


Remove the plugs from the head. Insert into the coil wires. Make sure they are properly earthed on the engine. Crank the motor and check for spark at each of the plugs.
Refer to the diagram. Cylinders are connected as shown on the diagram in blue. 1 goes to cylinder 1(sparkplug furthest from coil pack), 2 to 2, 3 to 3 and 4 to 4(closets to coil pack).
To test the coil pack use a digital volt meter. Measure resistance between coil towers for coil 1(marked 1 in red on diagram) Value should be between 12000 and 14500 ohm. Do the same for coil towers 2.
Measure resistance between I and C1. If the measurement is more than 5 ohm the coil is defective. Do the same for I to C2.
Measuring voltage at I(Ignition start/run) to ground should be 10V.
I is connected to the 15A engine fuse. The radio interference capacitor is connected between this line and earth at the coil. Disconnect it to see if it cures the problem.
C1 and C2 connect to the powertrain control module.
Bear in mind that aftermarket coil wires may cause problems with misfiring, so see if you cant find an OEM coil wire to replace the broken one before replacing anything else.

suzman_16.jpg

Nov 15, 2010 | 1989 Ford Escort

3 Answers

Trying to find a firing order diagram for a 91 ford aerostar 4.0L V6. I have a book for it, but it is impossible to put the plug wires on the coil block in the order they describe, wires are too short! ...


For the 4.0L V6:
Firing Order:

1-4-2-5-3-6
Cylinders:
........(back)........
|...3...|.......|...6...|
|...2...|.......|...5...|
|...1...|.......|...4...|
.........(front)
Ignition Coil Connections:
..(back)
1...2...3
5...6...4

Aug 08, 2010 | 1991 Ford Aerostar Extended

2 Answers

Order for plug wires


For the 1994 Buick Century:
I do not know if you have the 2.2L In-Line 4-Cylinder or the 3.1L V6; however I have included both below:

For the 2.2L L4:
Firing Order:
1-3-4-2
Cylinders:
.........(back).........
|...1....2....3....4...|
........(front)
Coil Connections:
(back)
o <----4
O.o <----1
.......o <----3
.......O.o <-----2
(front)

For the 3.1L V6:
Firing Order:
1-2-3-4-5-6
Cylinders:
.......(back)........
|...1....3....5...|
.......................
|...2....4....6...|
.......(front)
Coil Connections:
...........(back)
|.5..2.|..|.3..6.|..|.4..1.|
...........(front)

Jun 01, 2010 | 1994 Buick Century

1 Answer

I need a coil in #cylender but need to the fireing


If you are triing to find the bad coil simply run the truck and unplug each coil wire connection from each coil one at a time and change the one that dosn't change the way the engine is running.If you have coil over plug type ignition the firing order is controled by the computor and as long as you plug the coils in correctly no firing order is needed.

May 09, 2010 | 2002 Dodge Ram 3500 Truck

1 Answer

Firing order need to know what plug is number 1 and what plug on coil pack is number 1


For the 1993 Chevy Lumina:
I do not know if you have the 2.2L In-Line 4 Cylinder, 3.1L V6, or 3.4L DOHC V6 Engine; however I have included all below.

For the 2.2L (4-Cylinder)
Firing Order:
1-3-4-2
Cylinders:
......(back)
1.....2.....3.....4
......(front)
Ignition Coil Connections:
o <---4
...o <---1
.........
......o <----3
.........o <----2

For the 3.1L V6:
Cylinders:
...(back)
5.............6
3.............4
1.............2
....(front)
Ignition Coil Connections:
.|.1..4.|..|.6..3.|..|.2..5.|


For the 3.4L DOHC V6:
Firing Order:
1-2-3-4-5-6
Cylinders:
.......(back)
1........3.........5
2........4.........6
.......(front)
Ignition Coil Connections:
.|.1..4.|..|.3..6.|..|.2..5.|

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!


Apr 09, 2010 | 1993 Chevrolet Lumina

1 Answer

I need the diagram to put the spark plug cables


2003 Chevrolet Malibu 3.1L SFI OHV 6cyl
Spark Plug Wires - Removal & Installation

3.5L Engine
  1. Before servicing the vehicle, refer to the Precautions Section.
    NOTE Twist the spark plug boot one-half turn in order to release the boot. Pull on the spark plug boot only. Do not pull on the spark plug wire or the wire could be damaged.
  2. Remove the intake manifold cover, if required.
  3. Disconnect the left side spark plug wires from the spark plugs.
  4. Disconnect the left side spark plug wires from the ignition coil.
  5. Remove the spark plug wire clips from the Manifold Absolute Pressure (MAP) sensor bracket and the heater inlet and outlet pipe tab.
  6. Remove the spark plug wire assembly.
  7. If replacing only one plug wire, open the retaining clips and remove the appropriate spark plug wire.
  8. Disconnect the right side spark plug wires from the spark plugs.
  9. Disconnect the right side spark plugs from the ignition coils.
  10. Remove the spark plug wire assembly.
  11. If replacing only one plug wire, open the retaining clip and remove the appropriate spark plug wire.
To install:
  1. Install the spark plug wire assembly.
  2. Connect the right side spark plugs to the ignition coils.
  3. Connect the right side spark plug wires to the spark plugs.
  4. If replacing only one plug wire, open the retaining clip and install the appropriate spark plug wire.
  5. Install the spark plug wire assembly.
  6. Connect the left side spark plug wires to the spark plugs.
  7. Connect the left side spark plug wires to the ignition coil.
  8. Install the spark plug wire clips to the MAP sensor bracket and the heater inlet and outlet pipe tab.
  9. If replacing only one plug wire, open the retaining clips and install the appropriate spark plug wire.
  10. Install the intake manifold cover, if required.

Fig. 2.2L Engine Firing Order: 1-3-4-2 Distributorless ignition system
74d742b.jpg


Fig. 3.1L Engine Firing order: 1-2-3-4-5-6 Distributorless ignition system
306b531.jpg


Fig. 3.5L Engine Firing order: 1-2-3-4-5-6 Distributorless ignition system
9313fa7.jpg


Fig. 2.4L Engine Firing order: 1-3-4-2 Distributorless ignition system
2c9af72.jpg


Fig. 3.1L Engine Firing order: 1-2-3-4-5-6 Distributorless ignition system
d929c16.jpg


Fig. 2.2L Engine Firing Order: 1-3-4-2 Distributorless ignition system
f357cd3.jpg

Fig. 3.5L & 3.9L Engines Firing order: 1-2-3-4-5-6 Distributorless ignition system
09e9db9.jpg

I really hope help you with this (remember rated this help) Good luck.

Sep 23, 2009 | 2003 Chevrolet Malibu

Not finding what you are looking for?
2000 Mazda MX-5 Miata Logo

Related Topics:

2,727 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

77499 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8826 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...