Question about 2001 Ford Windstar
I do not have the diagram but, i would be able to able to explain it in the best possible way :-
Disconnect negative battery cable. Drain cooling system. Remove accessory drive belt. Raise and support vehicle. Remove lower radiator hose. Remove nut on both front engine mounts. Lower vehicle. Remove generator. Disconnect power steering pump pressure hose. Remove cowl top vent panel. See COWL TOP VENT PANEL .
Disconnect water by-pass hose. Remove water pump outlet tube retaining bolt, and position tube assembly aside. Attach lifting equipment to left exhaust manifold. Raise engine approximately 5" (127 mm). Remove accessory belt pulley nut, and remove pulley. Remove generator support bracket.
Remove water pump pulley. Remove water pump bolts, nuts and studs, noting location of studs. Remove water pump, lower tube and gasket as an assembly.
Install gasket using Gasket & Trim Adhesive (D7AZ-19B508-B). To complete installation, reverse removal procedure. Lightly oil threads of bolt and stud not containing thread sealant.
If bolts originally contained thread sealant, clean and reapply thread sealant to bolts. Install studs into original location. Tighten bolts and nuts in sequence to specification. Fill cooling system.
COWL TOP VENT PANEL
Remove windshield wiper pivot arms. Remove cowl top vent panel retaining screws. Release cowl top vent panel retaining clips. Remove windshield wiper fluid hose. Remove cowl top vent panel.
To install, reverse removal procedure. Tighten bolts and nuts to specification.
Let me know,if needed further assistance.
Hope i helped you.
Thanks for using ' Fixya ' and have a nice day!!
Posted on Jul 17, 2010
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
Aug 26, 2017 | Pontiac Cars & Trucks
Feb 08, 2013 | 2001 Pontiac Montana
Aug 19, 2012 | 1998 Volvo S70
Fig. Water pump assembly-4.6L Northstar engine (click image for zoom)
Fig. Remove the water pump belt shield
Fig. Remove the water pump adjuster pulley retaining bolt and
Fig. Remove the water pump retaining bolts
Jul 16, 2011 | 1997 Cadillac DeVille
Feb 05, 2011 | GMC Envoy Cars & Trucks
Sep 16, 2009 | 2005 Kia Spectra
Aug 29, 2009 | 1992 Plymouth Acclaim
Apr 04, 2009 | 1995 Isuzu Rodeo
112 people viewed this question
Usually answered in minutes!