Question about Subaru Outback

2 Answers

Please help me...I have 2000 Subaru Outback-Legacy, I have a problem with my back running lights not working. The brakes, rev, signal and all other lights seem to be working? I check all the fuses and they are all good! I cant drive my car at night with no back lights on...

Posted by on

  • jcram1972 Jul 17, 2010

    Is it possible that both back light would burn out at the same time?

  • jcram1972 Jul 17, 2010

    Okay....Thanks I'll check that out.

×

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Subaru Master
  • 6,927 Answers

Check for bad bulbs,and the sockets they go in,test the tail light contacts in the bulb socket to see if there is voltage there,and check the bulbs,they may have blown out at the same time.

Posted on Jul 17, 2010

  • Ronny Bennett Sr.
    Ronny Bennett Sr. Jul 17, 2010

    I have seen it a lot,so check it,before you go any farther,and then check the voltage at the tail lights if this does not help.

×

Ad
Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 2015 subaru outback 3.6 r makes a clicking sound when I floor the acceleration and it clicks while accelerating.


2011 3.6R Back Seat or Door Rattle / Click Sound - Subaru Outback ...

www.subaruoutback.org > ... > Models > Gen 4: 2010-2014
Dec 3, 2011 - 2011 3.6R Back Seat or Door Rattle / Click Sound ... The latch can bang into the plastic cover making a rattle sound. See More is offline. Clicking sound on stopped car with brake pedal
Oct 25, 2015
Yet another clicking sound. But in console and sounds like a relay ...
Jan 1, 2011
Clicking Sound After Engine Turned Off - Subaru Outback ...
May 30, 2010
Engine ticking sound? - Subaru Outback
Apr 4, 2010
More results from www.subaruoutback.org

2013 Subaru Outback Shifter makes clicking sound at low ...

? 0:07
www.youtube.com/watch?v=AUAKNhxKWTM
Jan 8, 2015 - Uploaded by Eric Seeger
I noticed this sound occurs during low speed stop and go driving. This video was ... 2013 Subaru Outback Shifter makes clicking sound at low speed braking. ... 2015 Subaru Legacy Challenges the Roadkill Project Cars! ... 2013 Subaru outback 3.6R up hill in snow - Duration: 1:47. by davidlcb 13,610 views.

Nov 13, 2015 | Subaru Cars & Trucks

1 Answer

I have a 1992 Subaru Legacy. The tail lights will not come on anymore. The lights work fine when I apply the brakes, but not when just running


Did you change the radio recently..if so you tapped into the wrong wire...and if not then I would say you have a bad headlight switch or a broke ground dome where

May 28, 2014 | 2000 Subaru Legacy

1 Answer

What years 5speed manual transmissions will fit 2000 subaru outback


all 5spd from legacy legacy gt outback will fit from 96-2002 they have same gear ratio you will have to change over mounts and speed sensor

Jan 14, 2011 | 2000 Subaru Outback

2 Answers

Replacing brake light on a subaru outback limited wagon 2000


How To Install Replace Change Taillight and Bulb 2000-04 Subaru Outback

Apr 07, 2010 | 2000 Subaru Outback

3 Answers

1993 Subaru Legacy, the parking lights stay on all the time


there is a rocker switch on the top center of your steering colum that may have gotten turned on
hope this helps.
C.

Jul 11, 2009 | 1997 Subaru Outback

1 Answer

I have a subaru legacy outback, abs light comes on


one of your abs sensor is bad or the abs motor,go to local shop to diagnose which sensor,shop usually charge $ 60 to diagnose abs system,good luck, let me know ..

Jun 04, 2009 | 1996 Subaru Legacy

1 Answer

On my 2005 subaru legacy outback 2.5l replaced passenger side cv axle. now while driving the vehicle i come to a stop light or stop sign foot on brake pedal engine makes cavitating noise and feel the...


If I understand you correctly, you feel a vibration it the brake pedal when you apply the brakes. Is that correct?
Have your brake rotors re surfaced; they are warped.

"engine makes cavitating noise" ....what does this mean?

Apr 21, 2009 | 2005 Subaru Outback

1 Answer

My running lights will not turn off unless I unhook the battery.


Subaru Outback Legacy Flashing
Q. I have a 1996 Subaru Outback Legacy AWD manual transmission. the hazards flash when I turn the car off. I tried to reset the system by pushing the little black button under the drivers' side dash but it won't reset the system. I had problems with the brakes so I did not drive it for about two months and when I tried to start the car the battery was dead.
mechanic.jpg Now the brakes are fixed but the hazards won't quit flashing and the guy who repaired the car said I needed to reset the system by pushing the little black button. And I don't know if I should have it looked at, or change the battery, or if it is something very simple I can fix by my self.
Thank you very much,
Patrick
A. Patrick, you are the third person in the last two days that has come to me with this same exact problem under the same conditions. As of now I don't have any concrete information on this, but I believe the problem to be in the alarm system.
I believe the battery being disconnected or dying does something to the Anti-theft and Alarm System module and having a Subaru dealer reset the system will correct it.
If you do this and it works, please, let me know and I will pass the information on to the others.
Added 11/7/2003
Dear Mr. Ciulla,
I read your Q&A titled "Subaru Outback Legacy Flashing". I recently had the same problem on my 1996 2.5 liter Subaru Legacy Outback and your response is correct but I can give you a little more detail on what worked for me to stop the light flashing (which occurs sometimes if the battery had been dead):
There is a black reset button under the I/P near the anti-theft module.
  1. Turn ignition on
  2. Hold button 20+ seconds (door locks will lock/unlock 3 times)
  3. Turn ignition off
This also resets the key FOB so as step 2.5 you should also press the "lock" button on the key FOB before releasing the black reset button (door locks will lock/unlock one more time--do this with each key FOB you own). That's all!
The questioner in your Q&A said he tried the reset button; I suspect he either didn't turn the ignition on/off or didn't hold it in for over 20 seconds.
PS... pulling the door lock fuse will stop it temporarily if you can't get the above to work and have to take it to the dealer
Regards,
John
subaru.jpg
Photo Courtesy John Spieth ©2003
Additional Information provided courtesy of ALLDATA

Nov 26, 2008 | 1998 Subaru Legacy

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

85 people viewed this question

Ask a Question

Usually answered in minutes!

Top Subaru Experts

yadayada
yadayada

Level 3 Expert

77499 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

Brandon Johnson
Brandon Johnson

Level 2 Expert

251 Answers

Are you a Subaru Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...