Question about 1999 Buick Park Avenue

1 Answer

Inside lights wont go off! help please

Inside lights wont go off! help please

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 197 Answers

The door switch which is located on the inside of the door frame (both doors or all 4 drs) might be bad or stuck. Push the switch with your finger several times to see if it is working properly. Also on your switch for the lights might be turned all the way to the left (or right) If you turn the light switch it will make your dash lights briter or dimer but if you turn ot all the way to the left or right it will make the inside light stay on. Close your doors, sit in the drivers seat and turn the light switch(on the dash) to see if the light goes off. Don't turn the light switch hard if will kind of snap on or off, you can feel it when it does. Some time when your on a long trip a brite instrument reading gets to be annoying and people turn the dash lights down.

Posted on Sep 02, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Died now wont start


The security system need to be reset, plug your charger back on the battery then turn the ignition switch on and leave it on untill the security warning light turns off (about 10 to 20 Min) then turn the key to off wait 5sec then turn the car on it should be good to go, this solves this kind of problem 9 out of 10. good luck

Oct 12, 2012 | 2001 Ford Escape

1 Answer

I have a 1996 blazer i heared a back fire and it stop, and it wont start it turn over but wont start it trys.. please help


check the distributor cap it may be bad. check inside of dist. for other bad parts. its a timing issue! so check the dist. etc, GOOD-DAY ! if the check engine light is on, get it scanned to see what the problem code is! check dist. first ! ( could be a bad crank sensor ) for this controls the timing.

Aug 24, 2011 | 1996 Chevrolet Blazer

1 Answer

Battery was replace 2 yrs ago. I had an issue with the car dying on me a few weeks ago. I wiggled the positive wire and it started. Now 2 weeks later, i tried the same thing when it decided not to start....


Take the battery cables off one by one and clean the inside of the clamps with sandpaper/emery cloth. do the post also, re-clamp and try again. Many times the inside of the cables become corroded and have enough contact to power the lights but when you try to start it there is not enough flow to turn the starter.

Jan 25, 2011 | 2003 Dodge Intrepid

1 Answer

95 chevy blazer 4 door. driver door started to sagg slightly, shortly after the interior light wont go off without pulling the fuse. then the power door locks wont work. Ive heard when door is shut it must...


with the door sagging it may not be pushing button in far enough to shut light off or aligning with button right.Replace bushings in door.The fuse is probably the same one for light and door locks.

Sep 18, 2017 | 1995 Chevrolet Blazer

1 Answer

Just fixed the valve covers and now the car wont stay crunk up


battery is probably low.when trying cranking for a period of time battery get weak thats why battery light on.charge battery.to see if it hold a charge.when battery fully charged it should be 12.5 volts.with engine running alternator out put should be 13.5 to 14.5.if not replace the alternator.or have it tested.when replacing valve covers make sure your pvc valve.in valve cover in place if not your car will stall out and idle rough.your oil leak on inside of your car from a leaking oil line to oil pressure gauge.thats why your oil light is on.

Jun 21, 2009 | 1997 Mazda Millenia

3 Answers

1997 ford exibition xlt my interior light and running board lights wont go off along wiith the door ajar light on dash board. please help


Take some WD40 and open the doors and spray a liberal amount into each of the door latches. Then open and close the doors firmly several times. This will work most of the time to unstick the ajar switches.

May 24, 2009 | 1997 Ford Expedition

1 Answer

Blazer


did you turn the key fully to towards the dash? take the steering wheel left and right slowely and at the same time turn the key back and forth several times slowly. there is a detent inside the steering column that allows you to ingage the neutral safety switch. this should help.....please rate this thanks.

Aug 31, 2008 | 1997 Chevrolet Blazer

Not finding what you are looking for?
1999 Buick Park Avenue Logo

137 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

77499 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...