Question about 1995 Ford Mustang

1 Answer

Replacing passenger headlight procedures please

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 161 Answers

Open the hood. You will see the bundle of wires going into the headlight bucket on either side of the car. The wire bundle is attached to a harness fitting. That harness is a quarter-turn-lock type. Twist the harness out and it will expose your headlights. Be careful not to touch the replacement bulb with your fingers as the moisture and salt in your skin will blow the new bulb. You can handle it with a clean rag or even a piece of paper, but just don't touch it with your bare hand.

Posted on Jul 17, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need to remove old broken passenger side headlight assembly and install new assembly in my 2004 Chevy Colorado crew cab. I need step by step instructions on how to do this myself.


I am not sure about the Colorado, but most vehicles about that age have a plastic clip. If you open the hood it is near the back of the headlight area and pulls straight up. You should be able to take these two clips off and the headlight will go straight forward, you can then twist the bulb holders out of the headlight assembly. Reverse procedure to install. Please rate my answer so I an awarded points for it.

Jan 29, 2012 | Chevrolet Colorado Cars & Trucks

1 Answer

Where is the engine cooling fan relay located on a 2002 jeep grand cherokee laredo


It is located under the right (passenger) headlight assembly. The headlight assembly must be removed first. The quickest way is to use a Dremel tool to cut an opening in the headlight bucket. Go to YouTube and search for this procedure. I did it on my 2002 and it worked like a charm. Using the Dremel is easier than removing the entire header panel and other headlight. The Dremel procedure saves about 2 hours on the job.

May 19, 2011 | 2002 Jeep Grand Cherokee

1 Answer

Low beam lights on the passenger side works and driver side does not. high beam driver side works and passenger side does not. we have already replaced the bulbs and it did not help.


It's quite common for headlight connectors to become so tarnished that one or both of the filaments in the headlights is either dim or non-functional. One way to clean them up is to cut a strip of steel the same width as the terminal blades on the headlight (this is for push-on connectors; some vehicles use screw terminals) and long enough to hold conveniently, then cut a strip of Scotch-Brite about 6-8" long and the same width. Wrap and hold the Scotch-Brite around one end of the strip to make your contact cleaning device. Push it into the connector contact and pull it out several times. Repeat for each contact. Next, identify the ground wire for each headlight connector (black or green wire that connects to vehicle body metal somewhere nearby). Unscrew the ground terminal from the vehicle body and polish the terminal and the underside of the screw head, and clean the body metal in the area covered by the terminal.

If the headlight comes on but is still dim, repeat the connector cleaning procedure. If the headlight connector is very severely corroded, you may need to replace it.

Feb 19, 2011 | 2002 Chrysler Town & Country

1 Answer

2005 f 150 ; passenger side headlight out ; how do i change ? Is the bulb universal or is this a sealed headlight unit ?


The Bulb is a H13 bulb, any auto parts store would carry them.

The procedure for replacing the bulb is in the owners manual
sscullys_36.jpg

If you did not get an owners manual with your truck ( purchased used ), you can download one from Ford :
https://www.fleet.ford.com/maintenance/owners_manuals/default.asp

Dec 11, 2010 | 2005 Ford F-150

1 Answer

Changing the passenger side headlamp on altma


  1. Open the hood. Locate the two 10 mm coolant reservoir retaining bolts on the passenger side of the vehicle and then remove them using the ratchet and socket.
  2. Remove the 10 mm bracket retaining bolt using the ratchet and socket. Remove the bracket.
  3. Position the coolant reservoir out of the way to gain access to backside of the headlight assembly.
  4. Turn the large plastic headlight cover counterclockwise to remove it from the back of the headlight assembly. Remove the cover.
  5. Disconnect the wire harness clips from the headlight blades by pulling them off.
  6. Press in and then upward on the headlight retaining ring holding the headlight bulb in place. Remove the bulb.
  7. Align the new composite headlight into place without touching the glass bulb. Skin oils will greatly reduce and compromise the longevity of a halogen composite headlight.
  8. Refasten the retaining ring to secure the headlight into the headlight assembly. Plug the wire harness onto the blade of the headlight and test for function. Reassemble the remaining components by reversing the procedure.
Hope this helps. :)

Feb 13, 2010 | 2001 Nissan Altima

1 Answer

2005 Lexus RX330 HID ballast replacement, passenger side headlight. What is the removal procedure please?


I have a 2005 Lexus Rx330 with HID AFS headlight. My passenger side light went out. I thought the bulb burnt out, so I bought a new bulb. After replacing the new bulb, it happened exactly like my old bulb. It light up lightly and then total black out. What's wrong with it? I thought the ballast burnt. I called Lexus dealer and asked for the new ballast/transformer. Surprised me, they don't know what is it. They told me they only know the wiring harness and the socket, but not the ballast ??????? Could you tell me what do I need to replace?

Thanks,

Feb 02, 2010 | 2005 Lexus RX330

1 Answer

I can't get to the high beam bulbs on our 2005 Odyssey. How do I remove the headlight for easier access to the bulbs?


The procedure doesn't call for removing the headlight assembly. It is as follows:
The high beam headlight bulb and the low beam headlight bulb are replaced the same way.

Open the hood. To change the high beam headlight bulb on the passenger’s side, remove the power steering fluid reservoir from its holder by pulling it straight up.

Remove the electrical connector from the bulb by pushing on the tab and pulling the connector down.

Remove the bulb by turning it one quarter turn counterclockwise.

Insert the new bulb into the hole and turn it one-quarter turn clockwise to lock it in place.

Push the electrical connector back onto the bulb. Make sure it is on all the way.

Turn on the headlights to test the new bulb.

If you replaced the high beam headlight bulb on the passenger’s side, reinstall the power steering fluid reservoir.

Hope this helps, but if you are having some specific problem leave a more detailed comment and I will try to help you.

Dec 26, 2009 | 2005 Honda Odyssey

2 Answers

How do you replace a burned out bulb (not an entire headlight) on the passenger side of a 2006 Suzuki Forenza


open the hood and look for the rear side it will be a coupler turn type deal ..twist it out and remove old bulb and re-installation is reverse procedure

Sep 22, 2009 | 2006 Suzuki Forenza

1 Answer

Need to remove the passenger side headlight assembly on an "06 vw touareg?


There can be slight variations in procedure from one model to another when replacing headlights. For instance, on some models the turn signal light assembly must be removed before the headlight can be replaced. Overall, however, the procedure does not differ much from the following typical instructions.
Make sure the replacement bulb is the same type and part number as the one that is being replaced.

To Replace:
  • Remove the headlight bezel retaining screws. Remove the bezel. If necessary, disconnect the turn signal lamp wires.
  • Remove the retaining ring screws from one or both lights.
  • Remove the retaining rings.
  • Remove the light from the housing. Disconnect the wiring connector from the back of the light.
  • Push the wiring connector onto the prongs at the rear of the new light.
  • Place the new light in the headlight housing. Position it so the embossed number in the light lens is on the top.
  • Place the retaining ring over the light and install the retaining ring screws. Tighten them slightly.
  • Check the aim of the headlight and adjust it, if necessary.
  • Install the headlight bezel. Secure it with the retaining screws.
  • Connect the turn signal lamp wiring (if it was disconnected).
Hope this helps!

Mar 10, 2009 | 2006 Volkswagen Touareg

1 Answer

Instructions on replacing headlight assembly


96 f150 procedure

Headlamp Assembly Removal
  1. Remove radiator air deflector from radiator support.
  1. Remove two screws and two nuts retaining headlamp door (13064).
  1. Pull headlamp door from vehicle. Remove three bulbs and sockets.
  1. Disconnect engine control sensor wiring (12A581) from headlamp bulb (13007).
  1. Remove two retainers attaching upper two attachments of headlamp (13008).
  1. Turn horizontal headlamp adjusting screw (13032) completely out of the adjusting nut.
  1. Pull headlamp from vehicle.

Oct 17, 2008 | 1994 Ford F150 Styleside Supercab

Not finding what you are looking for?
1995 Ford Mustang Logo

Related Topics:

63 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

Marvin
Marvin

Level 3 Expert

81400 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

gerry bissi

Level 3 Expert

4376 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...