Question about 2000 Mercury Mountaineer

1 Answer

The display on my 2000 Mountaineer radio works some of the time. Somtimes it will slowly dim and then go blank. Most of the time it is blank. Is there a fix?

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have researched this through multiple forums and "DIY" sites, apparently the problem is excessive heat building up in the radio and loosening solder terminals on the power board for the radio display. After trying the recommended re-soldering fix a couple of times without success I believe that the best way to go is to purchase a repair kit (HWM0043 ) and swap out the power supply. Try SOT Electronics, Inc. 4090 Pike Lane Concord, CA 94520 800-442-4491 ext. 562

Posted on Sep 06, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My cd player or radio wont work but i can push the button to display the time


check your owner manule somtimes the code for radio is in rear or front if not GM dealer can get your code.

Jul 09, 2011 | 2002 Chevrolet Prizm

1 Answer

Radio is on but display is dimmed


Maybe, your radio is having problem with the connection. Check the connection of your radio whether it is properly connected or your give your radio to a repairer for proper servicing. So, the problem is of two types, (1) Connection of the radio to your car or (2) The radio needs to be serviced.

Sep 21, 2009 | 2000 Toyota Avalon

1 Answer

The display on the factory dual media audio system does work.


older radios had a bulb you could replace, pre-1990

however, now the displays are true LCD and the radio will need replacing

Jun 23, 2009 | 1998 Mercury Mountaineer

1 Answer

Stereo Backlighting won't light up


I have had the same problem. It is a short within the radio itself. There really is no fixing it except for buying a new one.

May 04, 2009 | 2000 Mercury Mountaineer

1 Answer

Radio's display won't light up


The radios in the 2000 Mountaineer are notorious to short out. You simply have to get a new one. Believe me. I had the same problem.

Mar 15, 2009 | 2000 Mercury Mountaineer

1 Answer

Radio wont work


wfdyer,

go buy a new radio. You can usually get free installation. If you are a do it yourselfer. Then go to crutchfields web site. They are great, they give you the adaptor plates and wire harness to go from what ever radio you get to the car, with no splicing (cutting and reconnecting of wires) They will tell you what radios will not work and tell you what ones will.

Sorry to say it but you have power to the radio, and there are really 3 things a radio needs to work. power, speakers, and a signal. you can check the antena to make sure its not broken or disconnected. but most of the times its the radio

tepfy

Jan 23, 2009 | 1997 Cadillac Catera

Not finding what you are looking for?
2000 Mercury Mountaineer Logo

479 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercury Experts

gerry bissi

Level 3 Expert

4382 Answers

Marvin
Marvin

Level 3 Expert

82208 Answers

fordexpert

Level 3 Expert

5690 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...