Question about 2000 Dodge Caravan
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Hello, You remove the headlamp assembly by removing the 3 bolts that hold it in place. The bolts are #1 in the following picture:
Posted on Oct 23, 2008
I had the lights on my dash and tail lights go out on my 1995 Grand Am (headlights, turn signals, brake lights still worked).
After much investigation, it ended up being that the turn signal switch
had gone bad. I got mine at Autozone - $79.99 for one with cruise,
$69.99 for one without. SW860 for the non-cruise, SW859 for the cruise
version. It is sometimes referred to as a multifunction switch -
however, when I called and asked about that, it seemed as though the
parts are NOT the same (MFS was much more expensive). Make sure you
specify turn signal switch (that also controls the tail lights,
In order to replace it, you need to remove the cover around the steering column - we couldn't get the lower part of the cover off and subsequently also had to pull the steering wheel (which also meant disabling the air bag), then remove the bad turn signal switch (which also controls the headlights, parking lights, tail lights, etc), pop in a new one, put everything back together (re-enabling the airbag) and then you can enjoy a life of dash lights and tail lights once again.
Posted on Nov 16, 2008
No preferences as to charger, as long as it has trickle charge option (slower, but better for battery). Would like to see battery load test done by parts store to see battery condition, but a simple charge may be it. Let me know how it goes, hopefully you will have it up and running soon.
Posted on Jan 15, 2009
you simply reove the old link change them with new on its not very expensive and i suject you to change the bushing that hold the barr in place change all those part and you get ride of all the rattling noise you had good luck pierre
Posted on Mar 09, 2009
Tips for a great answer:
Sep 27, 2016 | 2000 Dodge Caravan
Jul 23, 2014 | Cars & Trucks
Jun 20, 2010 | Cars & Trucks
Feb 03, 2010 | 1997 Dodge Dakota
Jun 27, 2009 | 2005 Dodge Caravan
Mar 20, 2009 | 2001 Dodge Grand Caravan
Mar 05, 2009 | 2001 Dodge Caravan
Dec 03, 2008 | 2000 Dodge Grand Caravan
63 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: