Question about 1993 Ford Mustang

2 Answers

I have a question about a 93 mustang fox body, 2.3L. Over heats, i have flushed the radiator out, no leaks, fan works, changed thermostat, and temp sensor and my car still gets hot and then shuts down. i am lost? please help? I thought maybe hoses maybe closing up to a fuse problem, but im at a loss and need help. (mostly over heats on a very hot day running a long time in traffic in town, or if i travel over an hour with a/c on, on a very hot day) Thank you!

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 855 Answers

You need to have the radiator flow checked. It sounds as if you have a partially clogged radiator. Pull the radiator and take it to a radiator shop to be flow checked and I think you will find your problem. Depending on how bad it is clogged they may be able to clean out your radiator so you won't have to purchase a new one.

Posted on Jul 16, 2010

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 4,044 Answers

The only thing left is the water pump itself. Based on the problem description you need to replace the Water Pump to solve your issue.

Posted on Jul 16, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2001 VW Beetle 2.0 heater won t heat up


If you flushed the coolant with the thermostat in, chances are you didn't flush the coolant. Regardless, it's easiest to check the controls inside first. Does the blower fan work? Does the air flow change from floor to vent, to dash as it's supposed to? Does the A/C change temps when knob is turned from cold to hot? Post results.

Nov 26, 2013 | Volkswagen Beetle Cars & Trucks

1 Answer

Does ford 3.8 v 6 temp sensore thread into water jacket?


maybe air in the system? park it on ramps or a good uphill slant and remove the radiator cap and let it burp while you refill the radiator with coolant

Oct 02, 2017 | Cars & Trucks

1 Answer

99 jgc 6cyl changed all but radiator still heats in town


sounds like sludge build up in the radiator, have it flushed, however that might cause leaks that the sludge is currently plugging up, so be prepared to replace the radiator

Sep 08, 2012 | 1999 Jeep Grand Cherokee

1 Answer

93 nissan quest overheats


i would replace thermostat and also check to see if fan motor is running. Best way to check fan is to turn on the defrost and fan should kick on. flushing radiator would help and also check for leaks in the coolant system. hoses,heater core,waterpump. Hope this help and good luck

Aug 11, 2012 | Nissan Cars & Trucks

1 Answer

Its over heating and ive changed the water pump clutch fan and themostat.


You may have a blown head gasket. They can leak outside the motor, inside the cylinders (causues white smoke), or into the block causing water in the oil (light brown color and or bubbles on the dipstick) or oil in the radiator. Hopefully you have none of those, so the next step is a radiator flush as you probably have something clogging up the radiator or thermostat. You have to drain the radiator and fill with clean water. Pull out the thermostat and leave it out for the flush. There are radiator flush products that I suggest highly. Run the truck to operating temp (about 20 min) with the heat on and dump the system by removing the bottom hose hose from the radiator, after the truck cools off. With the hose still off dump water through the radiator to clean it out fully. fill with water and let it run once again to clean the block, then reinstall new thermostat and anti-freeze. This should clean out any rust and stop leak that is causing your problems.

Feb 28, 2011 | 1996 Chevrolet Blazer

3 Answers

Just flushed rad heater core and block because i had no heat. flushed the system filled with new antifreeze. my temp gauge will change from 150 to 210 I have heat then i dont


Replace the thermostat. I have had bad luck with aftermarket thermostats on this particular year of GM/ Chevy trucks.They tend to stick closed and then fully open, thus causing the temp to sort of surge hot and cold. A good thermostat will slowly open maintaning a good consistant temp. I would recommend spending a little more and getting a GM thermostat.


Please take a moment and rate my answer..........Thanks

Dec 01, 2010 | 1996 GMC Jimmy

3 Answers

Grand am running hot ----2004 se1 3.4l---changed water pump---radiator---thermostat---cooling temp censor


I would check to see if the radiator fan is coming on when the engine starts getting warm.

May 08, 2010 | 2004 Pontiac Grand Am

1 Answer

My mustang cranks with fuel on rag but wont start on its own i replaced fuel pump n checked fuces


The Body Control Module (BCM) on the inner front fender. Controls the fuel pump, Cooling fans... I have a '93 Fox Body. Been there done that.

Mar 01, 2010 | 1993 Ford Mustang

2 Answers

Chevy Celebrity overheating


All you have is one or two fans? Have you checked or replaced the thermostat? The thermostat opens when the engine gets to operating temp, and allows the water in the radiator to flow through engine and the water pump pumps the water out of the engine back through the radiator to cool before it goes back through again. I check the lower radiator hose to see if it get hot like the top hose or you could take the lower hose of the pump to see if it is pumping. I would start with a radiator flush and do this a couple times, prestone makes a flush and Im sure someone else does. do that then change your thermostat, make sure when you put the new one in it goes in spring side down..

Sep 04, 2009 | 2005 Ford Mustang

Not finding what you are looking for?
1993 Ford Mustang Logo

Related Topics:

104 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

77499 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

fordexpert

Level 3 Expert

5622 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...